Please select and order
€64.38
excl. VAT
Add to cart
Norm

ÖNORM EN ISO 10366-2

Issue date: 2004 05 01

Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003)

1.1 This part of ISO 10366 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of MABS moulding and extr...
Withdrawn: 2020 06 15
Publisher:
Austrian Standards International
Format:
Digital | 13 Pages
Language:
German | English | Download GER/ENG
Optionally co-design standards:
1.1 This part of ISO 10366 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of MABS moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given here. 1.2 Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are given. Properties and test methods which are suitable and necessary to characterize MABS moulding and extrusion materials are listed. 1.3 The properties have been selected from the general test methods in ISO 10350. Other test methods in wide use for, or of particular significance to, these moulding and extrusion materials are also included in this part of ISO 10366, as are the designatory properties specified in Part 1. 1.4 In order to obtain reproducible and comparable test results, it is necessary to use the methods of specimen preparation and conditioning, the specimen dimensions and the test procedures specified herein. Values determined will not necessarily be identical to those obtained using specimens of different dimensions or prepared using different procedures.
ÖNORM EN ISO 19066-2
2020 06 15
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materia...
Norm
ÖNORM EN ISO 10366-2
2004 05 01
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materia...
Norm
ÖNORM EN ISO 10366-2
1999 10 01
Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materia...
Norm
Norm
ÖNORM EN ISO 10366-1
Issue date : 2003 03 01
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 10366-1:2002)
Norm
ÖNORM EN ISO 1133
Issue date : 2005 10 01
Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005)
Norm
ÖNORM EN ISO 178
Issue date : 2005 05 01
Plastics - Determination of flexural properties (ISO 178:2001 + Amd 1:2004) (consolidated version)
Norm
ÖNORM EN ISO 178
Issue date : 2008 09 01
Plastics - Determination of flexural properties (ISO/DIS 178:2008)
Norm
ÖNORM EN ISO 180
Issue date : 2007 06 01
Plastics - Determination of Izod impact strength (ISO 180:2000 + Amd . 1:2006) (consolidated version)
Norm
ÖNORM EN ISO 294-1
Issue date : 1998 10 01
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996)
Norm
ÖNORM EN ISO 306
Issue date : 2004 10 01
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2004)
Norm
ÖNORM EN ISO 3167
Issue date : 2003 12 01
Plastics - Multipurpose test specimens (ISO 3167:2002)
Norm
ÖNORM EN ISO 527-2
Issue date : 1996 07 01
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:1993 including Corr 1:1994)
Norm
ÖNORM EN ISO 527-4
Issue date : 1997 09 01
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997)
Norm
ÖNORM EN ISO 75-2
Issue date : 2006 09 01
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2004) (consolidated version)
Norm
ÖNORM EN ISO 8256
Issue date : 2005 06 01
Plastics - Determination of tensile-impact strength (ISO 8256:2004)
Norm
ÖNORM EN ISO 899-1
Issue date : 2003 10 01
Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2003)
Norm
ISO 62:1980
Issue date : 1980 09 01
Plastics — Determination of water absorption
Norm
ISO 75-2:1993
Issue date : 1993 08 26
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
Norm
ISO 178:1993
Issue date : 1993 05 06
Plastics — Determination of flexural properties
Norm
ISO 179:1993
Issue date : 1993 05 06
Plastics — Determination of Charpy impact strength
Norm
ISO 180:1993
Issue date : 1993 05 06
Plastics — Determination of Izod impact strength
Norm
ISO 293:1986
Issue date : 1986 10 09
Plastics — Compression moulding test specimens of thermoplastic materials
Norm
ISO 294-1:1996
Issue date : 1996 12 26
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
Norm
ISO 306:1994
Issue date : 1994 07 21
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
Norm
ISO 527-2:1993
Issue date : 1993 06 10
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Norm
ISO 527-4:1997
Issue date : 1997 04 10
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
Norm
ISO 899-1:1993
Issue date : 1993 12 23
Plastics — Determination of creep behaviour — Part 1: Tensile creep
Norm
ISO 1133:1997
Issue date : 1997 01 22
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
Norm
ISO 1183:1987
Issue date : 1987 07 09
Plastics — Methods for determining the density and relative density of non-cellular plastics
Norm
ISO 1656:1996
Issue date : 1996 01 18
Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content
Norm
ISO 2561:1974
Issue date : 1974 08 01
Plastics — Determination of residual styrene monomer in polystyrene by gas chromatography
Norm
ISO 2818:2018
Issue date : 2018 12 13
Plastics — Preparation of test specimens by machining
Norm
ISO 3167:1993
Issue date : 1993 06 10
Plastics — Multipurpose test specimens
Norm
ISO 4581:1994
Issue date : 1994 07 21
Plastics — Styrene/acrylonitrile copolymers — Determination of residual acrylonitrile monomer content — Gas chromatography method
Norm
ISO 4589:1984
Issue date : 1984 12 01
Plastics — Determination of flammability by oxygen index
Norm
ISO 8256:1990
Issue date : 1990 12 20
Plastics — Determination of tensile-impact strength
Norm
ISO 10350:1993
Issue date : 1993 12 23
Plastics — Acquisition and presentation of comparable single-point data
Norm
ISO 10366-1:1993
Issue date : 1993 12 23
Plastics — Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials — Part 1: Designation system and basis for specifications
Norm
ISO 11357-2:1999
Issue date : 1999 03 25
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature
Norm
ÖNORM EN ISO 19066-2
Issue date : 2020 06 15
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020)
Norm
ISO 10366-2:2003
Issue date : 2003 11 28
Plastics — Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties