Please select and order
€160.20
excl. VAT
Add to cart
Norm
ÖNORM EN 13445-2
Issue date: 2007 05 01
Unfired pressure vessels - Part 2: Materials (consolidated version)
This Part of this European Standard specifies the requirements for materials (including clad materials) for unfired
pressure vessels and supports which are covered by EN...
Withdrawn: 2007 12 01
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 58 Pages
Language:
German
| English
Currently valid:
Optionally co-design standards:
ICS
This Part of this European Standard specifies the requirements for materials (including clad materials) for unfired
pressure vessels and supports which are covered by EN 13445-1:2002 and manufactured from metallic materials;
it is currently limited to steels with sufficient ductility. This document is not applicable in the creep range.
NOTE Other materials will be added later by amendments.
It specifies the requirements for the selection, inspection, testing and marking of metallic materials for the
fabrication of unfired pressure vessels.
ÖNORM EN 13445-2
2017 01 01
Unfired pressure vessels - Part 2: Materials (EN 13445-2:2014-09, Issue 3: 2016-07)
Norm
ÖNORM EN 13445-2
2013 11 15
Unfired pressure vessels - Part 2: Materials (consolidated version)
Norm
ÖNORM EN 13445-2
2009 07 01
Unfired pressure vessels - Part 2: Materials (consolidated version)
Norm
ÖNORM EN 13445-2
2007 12 01
Unfired pressure vessels - Part 2: Materials (consolidated version)
Norm
ÖNORM EN 13445-2
2007 05 01
Unfired pressure vessels - Part 2: Materials (consolidated version)
Norm
↖
ÖNORM EN 13445-2
2004 10 01
Unfired pressure vessels - Part 2: Materials (consolidated version)
Norm
ÖNORM M 7306
1992 07 01
Flat heads and covers of boilers or pressure vessels under internal or external pressure - Design an...
Norm
ÖNORM M 7308
1992 07 01
Flat stayed or stiffened ends or plates of boilers or pressure vessels under internal or external pr...
Norm
ÖNORM M 7304
1991 06 01
Cylindrical shells of boilers or pressure vessels under internal and external pressure - Design
Norm
ÖNORM M 7304
1990 07 01
Cylindrical shells of boilers or pressure vessels under internal and external pressure; design
Norm
ÖNORM M 7300
1990 06 01
Calculation of boilers and pressure vessels; design parameters, permissible stresses
Norm
ÖNORM M 7309
1988 09 01
Dished ends of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7311
1987 10 01
Round, square and elliptical tube sheets an tube bundle heat exchangers
Norm
ÖNORM M 7303
1984 04 01
Conical shells of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7308
1983 08 01
Flat stayed or stiffened ends or plates of boilers or pressure vessels under internal or external pr...
Norm
ÖNORM M 7306
1980 09 01
Flat heads and covers of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7303
1978 12 01
Conical shells of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7304
1978 10 01
Cylindrical shells of boilers or pressure vessels under external pressure; design
Norm
ÖNORM M 7301 Bbl 1
1977 11 01
Approximate calculation of reinforcement or openings in walls of boilers or pressure vessels
Norm
Norm
Issue date :
2008 03 01
Flat products made of steels for pressure purposes - Part 1: General requirements
Norm
Issue date :
2008 02 01
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties (consolidated version)
Norm
Issue date :
2009 02 01
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
Norm
Issue date :
2003 11 01
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
Norm
Issue date :
2009 02 01
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
Norm
Issue date :
2008 02 01
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties (consolidated version)
Norm
Issue date :
2009 02 01
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
Norm
Issue date :
2003 11 01
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
Norm
Issue date :
2009 02 01
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
Norm
Issue date :
2003 11 01
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
Norm
Issue date :
2009 02 01
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
Norm
Issue date :
2008 03 01
Flat products made of steels for pressure purposes - Part 7: Stainless steels
Norm
Issue date :
1991 05 01
Metallic materials - Charpy impact test - Part 1: Test method
Norm
Issue date :
2005 03 01
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
Norm
Issue date :
2004 07 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties (EN 10216-1:2002 + A1:2004)
Norm
Issue date :
2004 07 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (EN 10216-3:2002 + A1:2004)
Norm
Issue date :
2004 07 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties (EN 10216-4:2002 + A1:2004)
Norm
Issue date :
2005 01 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
Norm
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties (consolidated version)
Norm
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties (consolidated version)
Norm
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (consolidated version)
Norm
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties (consolidated version)
Norm
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties (consolidated version)
Norm
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties (consolidated version)
Norm
Issue date :
2005 06 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
Norm
Issue date :
2003 09 01
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings (EN 10222-1:1998 + A1:2002)
Norm
Issue date :
2000 04 01
Steel forgings for pressure purposes - Part 2: Ferritic and martesitic steels with specified elevated temperature properties
Norm
Issue date :
1999 10 01
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
Norm
Issue date :
1999 10 01
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
Norm
Issue date :
2000 03 01
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
Norm
Issue date :
2008 09 01
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
Norm
Issue date :
2008 02 01
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties (consolidated version)
Norm
Issue date :
2008 03 01
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
Norm
Issue date :
2004 08 01
Pressure equipment - Terminology - Part 1: Pressure, temperature, volume, nominal size
Norm
Issue date :
2002 09 01
Pressure equipment - Part 2: Quantities, symbols and units
Norm
Issue date :
2002 09 01
Pressure equipment - Part 3: Definition of parties involved
Norm
Issue date :
2005 02 01
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004)
Norm
Issue date :
1999 10 01
Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
Norm
Issue date :
1999 11 01
Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984)
Norm
Issue date :
2007 12 01
Unfired pressure vessels - Part 2: Materials (consolidated version)
