Please select and order
€185.23
excl. VAT
Add to cart
Norm
ÖNORM EN 13445-2
Issue date: 2011 09 01
Unfired pressure vessels - Part 2: Materials
This Part of this European Standard specifies the requirements for materials (including clad materials) for unfired
pressure vessels and supports which are covered by EN...
Withdrawn: 2012 10 01
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 84 Pages
Language:
German
| English
| Download GER/ENG
Currently valid:
Optionally co-design standards:
ICS
This Part of this European Standard specifies the requirements for materials (including clad materials) for unfired
pressure vessels and supports which are covered by EN 13445-1:2009 and manufactured from metallic materials;
it is currently limited to steels with sufficient ductility but it is, for components operating in the creep range, also
limited to sufficiently creep ductile materials .
It specifies the requirements for the selection, inspection, testing and marking of metallic materials for the
fabrication of unfired pressure vessels.
ÖNORM EN 13445-2
2017 01 01
Unfired pressure vessels - Part 2: Materials (EN 13445-2:2014-09, Issue 3: 2016-07)
Norm
ÖNORM EN 13445-2
2013 11 15
Unfired pressure vessels - Part 2: Materials (consolidated version)
Norm
ÖNORM EN 13445-2
2009 07 01
Unfired pressure vessels - Part 2: Materials (consolidated version)
Norm
ÖNORM EN 13445-2
2007 12 01
Unfired pressure vessels - Part 2: Materials (consolidated version)
Norm
ÖNORM EN 13445-2
2007 05 01
Unfired pressure vessels - Part 2: Materials (consolidated version)
Norm
ÖNORM EN 13445-2
2004 10 01
Unfired pressure vessels - Part 2: Materials (consolidated version)
Norm
ÖNORM M 7306
1992 07 01
Flat heads and covers of boilers or pressure vessels under internal or external pressure - Design an...
Norm
ÖNORM M 7308
1992 07 01
Flat stayed or stiffened ends or plates of boilers or pressure vessels under internal or external pr...
Norm
ÖNORM M 7304
1991 06 01
Cylindrical shells of boilers or pressure vessels under internal and external pressure - Design
Norm
ÖNORM M 7304
1990 07 01
Cylindrical shells of boilers or pressure vessels under internal and external pressure; design
Norm
ÖNORM M 7300
1990 06 01
Calculation of boilers and pressure vessels; design parameters, permissible stresses
Norm
ÖNORM M 7309
1988 09 01
Dished ends of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7311
1987 10 01
Round, square and elliptical tube sheets an tube bundle heat exchangers
Norm
ÖNORM M 7303
1984 04 01
Conical shells of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7308
1983 08 01
Flat stayed or stiffened ends or plates of boilers or pressure vessels under internal or external pr...
Norm
ÖNORM M 7306
1980 09 01
Flat heads and covers of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7303
1978 12 01
Conical shells of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7304
1978 10 01
Cylindrical shells of boilers or pressure vessels under external pressure; design
Norm
ÖNORM M 7301 Bbl 1
1977 11 01
Approximate calculation of reinforcement or openings in walls of boilers or pressure vessels
Norm
Norm
Issue date :
2010 12 01
Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2009)
Norm
Issue date :
2005 03 01
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
Norm
Issue date :
2012 06 15
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)
Norm
Issue date :
2010 04 01
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009)
Norm
Issue date :
2010 02 15
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009)
Norm
Issue date :
1999 10 01
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
Norm
Issue date :
1999 10 01
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
Norm
Issue date :
1999 10 01
Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
Norm
Issue date :
1999 11 01
Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984)
Norm
Issue date :
2008 02 01
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties (consolidated version)
Norm
Issue date :
2009 10 01
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2009)
Norm
Issue date :
2008 03 01
Flat products made of steels for pressure purposes - Part 7: Stainless steels
Norm
Issue date :
2008 03 01
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
Norm
Issue date :
2000 08 01
Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes
Norm
Issue date :
2009 11 01
Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009)
Norm
Issue date :
2002 01 01
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength (Amendment)
Norm
Issue date :
2007 11 01
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
Norm
Issue date :
2012 03 15
Pressure equipment - Part 2: Quantities, symbols and units
Norm
Issue date :
2004 07 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (EN 10216-3:2002 + A1:2004)
Norm
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (consolidated version)
Norm
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties (consolidated version)
Norm
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties (consolidated version)
Norm
Issue date :
2004 07 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties (EN 10216-4:2002 + A1:2004)
Norm
Issue date :
2002 09 01
Pressure equipment - Part 3: Definition of parties involved
Norm
Issue date :
2009 11 01
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
Norm
Issue date :
2009 11 01
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
Norm
Issue date :
2009 11 01
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
Norm
Issue date :
2004 08 01
Pressure equipment - Terminology - Part 1: Pressure, temperature, volume, nominal size
Norm
Issue date :
2005 03 01
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
Norm
Issue date :
2009 11 01
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
Norm
Issue date :
2009 11 01
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
Norm
Issue date :
2012 10 01
Unfired pressure vessels - Part 5: Inspection and testing
