Please select and order
€143.05
excl. VAT
Add to cart
Norm

ÖNORM EN 12201-1

Issue date: 2008 04 01

Plastics piping systems for water supply - Polyethylene (PE) - Part 1: General

This Part of this European Standard specifies the general aspects of polyethylene (PE) piping systems (mains and service pipes) intended for the conveyance of water for ...
Withdrawn: 2012 03 01
This Part of this European Standard specifies the general aspects of polyethylene (PE) piping systems (mains and service pipes) intended for the conveyance of water for human consumption, including raw water prior to treatment. It also specifies the test parameters for the test methods referred to in this standard. In conjunction with other Parts of this European Standard it is applicable to PE pipes, fittings, valves, their joints and to joints with components of other materials intended to be used under the following conditions: a) a maximum operating pressure, MOP, up to 25 bar 2); b) an operating temperature of 20 °C as a reference temperature.
ÖNORM EN 12201-1
2024 08 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylen...
Norm
ÖNORM EN 12201-1
2023 07 15
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylen...
Norm
ÖNORM EN 12201-1
2015 12 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylen...
Norm
ÖNORM EN 12201-1
2012 03 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylen...
Norm
ÖNORM EN 12201-1
2008 04 01
Plastics piping systems for water supply - Polyethylene (PE) - Part 1: General
Norm
ÖNORM EN 12201-1
2003 08 01
Plastics piping systems for water supply - Polyethylene (PE) - Part 1: General
Norm
ÖNORM B 5170
2001 05 01
Low density polyethylene pipes (PE 40) for water pipelines - Dimensions, requirements, tests, markin...
Norm
ÖNORM B 5172
2000 04 01
High density polyethylene pipes (PE 80, PE 100) for water pipelines - Dimensions, requirements, test...
Norm
ÖNORM B 5172
1999 11 01
High density polyethylene pipes (PE 80, PE 100) for water pipelines - Dimensions, requirements, test...
Norm
ÖNORM B 5172
1995 10 01
Pipes of polyethylene high density (PE-HD) for water supply systems - Dimensions, requirements, test...
Norm
ÖNORM B 5172
1990 08 01
Pipes of polyethylene high density (PE-HD) for water supply systems; dimensions, requirements, tests...
Norm
ÖNORM B 5172
1980 06 01
Pipes of high density polyethylene for water supply systems; dimensions and technical delivery requi...
Norm
ÖNORM B 5170
1977 01 01
Pipes of low density polyethylene for water supply systems; dimensions and technical specification
Norm
ÖNORM B 5172
1976 04 01
Pipes of high density polyethylene for water supply systems; dimensions and technical delivery requi...
Norm
ÖNORM B 5173
1964 02 01
Rohre aus PE-hart (Hartpolyäthylen) für Wasserversorungsanlagen; Technische Lieferbedingungen
Norm
ÖNORM B 5171
1964 02 01
Rohre aus PE-weich (Weichpolyäthylen) für Wasserversorgungsanlagen; technische Lieferbedingungen
Norm
ÖNORM B 5172
1962 02 01
Rohre aus PE-hart (Hartpolyäthylen) für Wasserversorungsanlagen; Abmessungen und Gewichte
Norm
ÖNORM B 5170
1962 02 01
Rohre aus PE-weich (Weichpolyäthylen) für Wasserversorgungsanlagen; Abmessungen und Gewichte
Norm
Expand
Norm
ÖNORM B 5012
Issue date : 2008 10 01
Structural design of buried water and sewerage pipelines
Norm
ÖNORM B 5014-1
Issue date : 2007 08 01
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 1: Organic materials (consolidated version)
Norm
ÖNORM B 5014-1
Issue date : 2011 12 15
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 1: Organic materials
Norm
ÖNORM B 5018-1
Issue date : 2002 08 01
Testing of biofilm formation potential of pipes in contact with drinking water - Part 1: Test procedure
Vornorm
ÖNORM B 5018-2
Issue date : 2002 08 01
Testing of biofilm formation potential of pipes in contact with drinking water - Part 2: Evaluation
Norm
ÖNORM EN 805
Issue date : 2000 08 01
Water supply - Requirements for systems and components outside buildings
Norm
ÖNORM EN 10204
Issue date : 2005 01 01
Metallic products - Types of inspection documents
Norm
ÖNORM EN 12201-2
Issue date : 2012 03 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
Norm
ÖNORM EN 12201-3
Issue date : 2012 03 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings
Norm
ÖNORM EN 12201-4
Issue date : 2012 03 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves
Norm
ÖNORM EN 12201-5
Issue date : 2012 03 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
Norm
ÖNORM EN ISO 1167-1
Issue date : 2006 07 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
Norm
ÖNORM EN ISO 1167-2
Issue date : 2006 07 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
Norm
ÖNORM EN ISO 6259-1
Issue date : 2002 02 01
Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:1997)
Norm
ÖNORM EN ISO 9080
Issue date : 2003 10 01
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003)
Norm
ÖNORM EN ISO 9080
Issue date : 2010 04 01
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO/DIS 9080:2010)
Norm
ÖNORM EN ISO 16871
Issue date : 2003 12 01
Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003)
Norm
ISO 2859-1:1999
Issue date : 1999 11 18
Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
Norm
ISO 6259-3:1997
Issue date : 1997 12 18
Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes
Norm
ISO 9001:2008
Issue date : 2008 11 13
Quality management systems — Requirements (Corrected version 2009-07)
Norm
ISO 13761:1996
Issue date : 1996 12 26
Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
Norm
ISO 13953:2001
Issue date : 2001 10 25
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
Norm
ISO 13954:1997
Issue date : 1997 12 25
Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
Norm
ISO 13955:1997
Issue date : 1997 12 25
Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies
Norm
ISO 13956:2010
Issue date : 2010 09 22
Plastics pipes and fittings — Decohesion test of polyethylene (PE) saddle fusion joints — Evaluation of ductility of fusion joint interface by tear test
Norm
ISO 14236:2000
Issue date : 2000 03 23
Plastics pipes and fittings — Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
Norm
ISO 9080:2003
Issue date : 2003 03 13
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
Draft
ISO/DIS 9080
Issue date : 2010 02 18
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
Norm
DIN 8075
Issue date : 2011 12
Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English
Norm
ISO 4065:1996
Issue date : 1996 12 26
Thermoplastics pipes — Universal wall thickness table
Norm
ÖNORM EN ISO 12162
Issue date : 2010 03 01
Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009)
Norm
ÖNORM EN 728
Issue date : 1997 11 01
Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time
Norm
ÖNORM EN 12099
Issue date : 1997 10 01
Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content
Norm
ÖNORM EN ISO 13478
Issue date : 2007 11 01
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:2007)
Norm
ÖNORM EN ISO 13479
Issue date : 2010 05 01
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2009)
Norm
ÖNORM EN 12107
Issue date : 1998 05 01
Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of ..........(abbreviated)
Norm
ÖNORM EN 12118
Issue date : 1998 05 01
Plastics piping systems - Determination of moisture content in thermoplastics by coulometry
Norm
ÖNORM EN ISO 472
Issue date : 2002 02 01
Plastics - Vocabulary (ISO 472:1999)
Norm
ÖNORM EN ISO 1043-1
Issue date : 2012 02 15
Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011)
Norm
ÖNORM EN ISO 1133-2
Issue date : 2012 03 15
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
Norm
ÖNORM EN ISO 1133-1
Issue date : 2012 03 15
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
Norm
ÖNORM B 5012
Issue date : 2015 11 01
Structural design of buried water and sewerage pipelines
Norm
ÖNORM B 5014-1
Issue date : 2016 08 15
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 1: Organic materials
Norm
ÖNORM B 5018-1
Issue date : 2002 08 01
Testing of biofilm formation potential of pipes in contact with drinking water - Part 1: Test procedure
Norm
ÖNORM EN 805
Issue date : 2000 08 01
Water supply - Requirements for systems and components outside buildings
Norm
ÖNORM EN 10204
Issue date : 2005 01 01
Metallic products - Types of inspection documents
Norm
ÖNORM EN 12201-2
Issue date : 2024 08 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
Norm
ÖNORM EN 12201-3
Issue date : 2024 08 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings
Norm
ÖNORM EN 12201-4
Issue date : 2024 08 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves
Norm
ÖNORM EN 12201-5
Issue date : 2024 08 01
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
Norm
ÖNORM EN 13244-1
Issue date : 2008 04 01
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General
Norm
ÖNORM EN 13244-2
Issue date : 2003 08 01
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2: Pipes
Norm
ÖNORM EN 13244-3
Issue date : 2003 08 01
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3: Fittings
Norm
ÖNORM EN 13244-4
Issue date : 2003 08 01
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves
Norm
ÖNORM EN 13244-5
Issue date : 2003 08 01
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5: Fitness for purpose of the system
Norm
ÖNORM EN ISO 1167-1
Issue date : 2006 07 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
Norm
ÖNORM EN ISO 1167-2
Issue date : 2006 07 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
Norm
ÖNORM EN ISO 6259-1
Issue date : 2015 07 01
Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)
Norm
ÖNORM EN ISO 9080
Issue date : 2013 04 01
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012)
Norm
ÖNORM EN ISO 16871
Issue date : 2003 12 01
Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003)
Norm
ISO 2859-1:1999
Issue date : 1999 11 18
Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
Norm
ISO 6259-3:2015
Issue date : 2015 06 07
Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes
Norm
ISO 9001:2015
Issue date : 2015 09 22
Quality management systems — Requirements
Norm
ISO 13761:2017
Issue date : 2017 07 18
Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
Norm
ISO 13953:2001
Issue date : 2001 10 25
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
Norm
ISO 13954:1997
Issue date : 1997 12 25
Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
Norm
ISO 13955:1997
Issue date : 1997 12 25
Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies
Norm
ISO 13956:2010
Issue date : 2010 09 22
Plastics pipes and fittings — Decohesion test of polyethylene (PE) saddle fusion joints — Evaluation of ductility of fusion joint interface by tear test
Norm
ISO 14236:2000
Issue date : 2000 03 23
Plastics pipes and fittings — Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
Norm
ISO 9080:2012
Issue date : 2012 10 11
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
Norm
DIN 8075
Issue date : 2018 08
Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English
Norm
ISO 3:1973
Issue date : 1973 04 01
Preferred numbers — Series of preferred numbers
Norm
ISO 1183:1987
Issue date : 1987 07 09
Plastics — Methods for determining the density and relative density of non-cellular plastics
Norm
ISO 4065:2018
Issue date : 2018 01 15
Thermoplastics pipes — Universal wall thickness table (Corrected version 2019-12)
Norm
ISO 6259-3:1997
Issue date : 1997 12 18
Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes
Norm
ISO 6964:1986
Issue date : 1986 12 11
Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method and basic specification
Technische Regel
ISO/TR 9080:1992
Issue date : 1992 07 16
Thermoplastics pipes for the transport of fluids — Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials
Norm
ISO 11414:1996
Issue date : 1996 05 23
Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
Norm
ISO 13477:1997
Issue date : 1997 10 02
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)
Norm
ISO 13953:2001
Issue date : 2001 10 25
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
Norm
ISO 18553:2002
Issue date : 2002 03 28
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
Norm
ÖNORM EN 12201-1
Issue date : 2012 03 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General