Please select and order
€134.80
excl. VAT
Add to cart
Norm

ÖNORM B 2531-1

Issue date: 2004 03 01

Drinking water supply systems on premises - Part 1: Rules for design, construction and operation

Diese ÖNORM enthält Richtlinien für Planung, Bau und Betrieb aller Einrichtungen, die der Zuteilung und Verteilung von Trinkwasser auf Grundstücken und in Gebäuden bis zu...
Withdrawn: 2012 09 01
§ Legal References
Diese ÖNORM enthält Richtlinien für Planung, Bau und Betrieb aller Einrichtungen, die der Zuteilung und Verteilung von Trinkwasser auf Grundstücken und in Gebäuden bis zur Entnahmearmatur dienen (ausschließlich aller dauernd oder vorübergehend angeschlossenen Geräte selbst), und zwar: - bei Anschluss an das Versorgungsnetz eines Wasserversorgungsunternehmens ab Übergabestelle am Ende der Anschlussleitung; - bei Anschluss an eine Eigenwasser-Versorgungsanlage (Quellfassung oder Brunnen) ab der Wasserent-nahmevorrichtung (Seiher, Saugkorb u.dgl.) in der vorerwähnten Gewinnungsanlage. Als Trinkwasser gilt im Gegensatz zum Nutz-wasser ein für menschlichen Genuss nachgewiesenermaßen geeignetes Wasser, ungeachtet des Verwendungszwecks.
ÖNORM B 2531
2019 04 15
Specifications for installations inside buildings conveying water for human consumption - National s...
Norm
ÖNORM B 2531
2012 09 01
Specifications for installations inside buildings conveying water for human consumption - National s...
Norm
ÖNORM B 2531-1
2004 03 01
Drinking water supply systems on premises - Part 1: Rules for design, construction and operation
Norm
ÖNORM B 2531-1
2000 12 01
Drinking water supply systems on premises - Rules for design, construction and operation
Norm
ÖNORM B 2531-1
1975 07 01
Drinking water supply systems on premises; rules for design, construction and operation
Norm
ÖNORM B 2531
1960 03 31
Inneninstallationen für Wasserleitungsanlagen; Richtlinien für Bau und Betrieb
Norm
ÖNORM B 2531
1954 11 27
Inneninstallationen für Wasserleitungsanlagen; Richtlinien für Bau und Betrieb
Norm
Expand
Norm
ÖNORM EN 10216-1
Issue date : 2004 07 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties (EN 10216-1:2002 + A1:2004)
Norm
ÖNORM EN 10216-1
Issue date : 2010 01 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
Norm
ÖNORM EN 10216-2
Issue date : 2007 12 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
Norm
ÖNORM EN 10216-2
Issue date : 2010 03 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
Norm
ÖNORM EN 10216-3
Issue date : 2004 07 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (EN 10216-3:2002 + A1:2004)
Norm
ÖNORM EN 10216-3
Issue date : 2010 01 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
Norm
ÖNORM EN 10216-4
Issue date : 2004 07 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties (EN 10216-4:2002 + A1:2004)
Norm
ÖNORM EN 10216-4
Issue date : 2010 01 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
Norm
ÖNORM EN 10216-5
Issue date : 2005 01 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
Norm
ÖNORM EN 10216-5
Issue date : 2010 01 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
Norm
ÖNORM EN 10217-1
Issue date : 2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties (consolidated version)
Norm
ÖNORM EN 10217-1
Issue date : 2010 01 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
Norm
ÖNORM EN 10217-2
Issue date : 2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties (consolidated version)
Norm
ÖNORM EN 10217-2
Issue date : 2010 01 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
Norm
ÖNORM EN 10217-3
Issue date : 2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (consolidated version)
Norm
ÖNORM EN 10217-3
Issue date : 2010 01 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
Norm
ÖNORM EN 10217-4
Issue date : 2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties (consolidated version)
Norm
ÖNORM EN 10217-4
Issue date : 2010 01 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
Norm
ÖNORM EN 10217-5
Issue date : 2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties (consolidated version)
Norm
ÖNORM EN 10217-5
Issue date : 2010 01 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
Norm
ÖNORM EN 10217-6
Issue date : 2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties (consolidated version)
Norm
ÖNORM EN 10217-6
Issue date : 2010 01 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
Norm
ÖNORM EN 10217-7
Issue date : 2005 06 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
Norm
ÖNORM EN 10217-7
Issue date : 2010 01 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
Norm
ÖNORM EN 10224
Issue date : 2007 12 01
Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions (consolidated version)
Norm
ÖNORM EN 10312
Issue date : 2007 12 01
Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions (consolidated version)
Norm
ÖNORM EN 12056-3
Issue date : 2000 12 01
Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation
Norm
ÖNORM EN 12201-1
Issue date : 2012 03 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
Norm
ÖNORM EN 12201-2
Issue date : 2012 03 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
Norm
ÖNORM EN 12201-3
Issue date : 2012 03 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings
Norm
ÖNORM EN 12201-4
Issue date : 2012 03 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves
Norm
ÖNORM EN 12201-5
Issue date : 2012 03 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
Norm
ÖNORM EN 12828
Issue date : 2003 09 01
Heating systems in buildings - Design for water-based heating systems
Norm
ÖNORM EN 12828
Issue date : 2011 04 15
Heating systems in buildings - Design for water-based heating systems
Norm
ÖNORM EN ISO 15874-1
Issue date : 2008 03 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2003 + Amd 1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15874-1
Issue date : 2010 10 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO/DIS 15874-1:2010)
Norm
ÖNORM EN ISO 15874-2
Issue date : 2008 03 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2003 + Amd 1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15874-2
Issue date : 2010 10 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO/DIS 15874-2:2010)
Norm
ÖNORM EN ISO 15874-3
Issue date : 2004 06 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2003)
Norm
ÖNORM EN ISO 15874-3
Issue date : 2010 10 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO/DIS 15874-3:2010)
Norm
ÖNORM EN ISO 15874-5
Issue date : 2004 06 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2003)
Norm
ÖNORM EN ISO 15874-5
Issue date : 2010 10 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO/DIS 15874-5:2010)
Norm
ÖNORM EN ISO 15875-1
Issue date : 2008 03 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2003 + Amd 1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15875-2
Issue date : 2008 03 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2003 + Amd 1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15875-3
Issue date : 2004 06 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)
Norm
ÖNORM EN ISO 15875-5
Issue date : 2004 06 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003)
Norm
ÖNORM EN ISO 15876-1
Issue date : 2008 03 01
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General (ISO 15876-1:2003 + Amd 1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15876-2
Issue date : 2008 03 01
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes (ISO 15876-2:2003 + Amd 1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15876-3
Issue date : 2004 06 01
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings (ISO 15876-3:2003)
Norm
ÖNORM EN ISO 15876-5
Issue date : 2004 06 01
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2003)
Norm
ÖNORM EN ISO 15877-1
Issue date : 2011 07 15
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2009 + Amd 1:2010) (consolidated version)
Norm
ÖNORM EN ISO 15877-2
Issue date : 2011 07 15
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO 15877-2:2009 + Amd 1:2010) (consolidated version)
Norm
ÖNORM EN ISO 15877-3
Issue date : 2011 07 15
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO 15877-3:2009 + Amd 1:2010) (consolidated version)
Norm
ÖNORM EN ISO 15877-5
Issue date : 2011 07 15
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2009 + Amd 1:2010) (consolidated version)
Norm
ÖNORM M 5611
Issue date : 1981 10 01
Steel tubes; medium-weight suitable for screwing
Norm
ÖNORM M 5612
Issue date : 1981 10 01
Steel tubes; heavy-weight suitable for screwing
Norm
ÖNORM M 7580
Issue date : 1985 06 01
Insulation of heating installations; requirements, certificates, calculations
Norm
ÖNORM M 7826-1
Issue date : 2012 08 01
Soldering and brazing of copper pipes used for installation purposes - Part 1: Filler metals and fluxes
Norm
ÖNORM M 7826-2
Issue date : 2012 08 01
Soldering and brazing of copper pipes used for installation purposes - Part 2: Performance and testing of soldered and brazed joints
Norm
ÖVE/ÖNORM E 8001-1
Issue date : 2000 03 01
Erection of electrical installations with rated voltages up to AC 1000 V and DC 1500 V - Part 1: Definitions and measures against electric shock
Norm
ÖVE/ÖNORM E 8001-1
Issue date : 2010 03 01
Erection of electrical installations with rated voltages up to AC 1000 V and DC 1500 V - Part 1: Definitions and measures against electric shock (consolidated version)
Norm
ÖNORM B 2501
Issue date : 2009 09 01
Sewer systems for buildings - Design, construction and testing - Supplementary guidelines to ÖNORM EN 12050 and ÖNORM EN 12056
Norm
ÖNORM B 2538
Issue date : 2002 11 01
Long-distance, district and supply pipelines of water supply systems - Additional specifications concerning ÖNORM EN 805
Norm
ÖNORM B 5013-1
Issue date : 1990 09 01
Corrosion protection by organic coatings for water and wastewater engineering in resid. areas; assesment of corr. probability and prot. of unalloyed and low-alloyed ferrous mat.
Norm
ÖNORM B 5013-2
Issue date : 1990 09 01
Corrosion protection by organic coatings for water and waste water engineering in residential areas; assesment of corrosion probability and protection of cement-bound materials
Norm
ÖNORM B 5014-1
Issue date : 2012 06 15
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 1: Organic materials
Norm
ÖNORM B 5161
Issue date : 2007 04 01
Plastics piping systems for water supply and for drainage and sewerage with or without pressure - Pipes, joints and fittings made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Supplementary requirements to ÖNORM EN 1796 and ÖNORM EN 14364 as well as procedure for the proof of conformity
Norm
ÖNORM B 8115-2
Issue date : 2006 12 01
Sound insulation and room acoustics in building construction - Part 2: Requirements for sound insulation
Norm
ÖNORM EN 200
Issue date : 2008 12 01
Sanitary tapware - Single taps and combination taps (PN 10) - General technical specification
Norm
ÖNORM EN 512
Issue date : 1995 01 01
Fibre-cement products - Pressure pipes and joints
Norm
ÖNORM EN 545
Issue date : 2011 03 15
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
Norm
ÖNORM EN 806-1
Issue date : 2001 03 01
Specifications for installations inside buildings conveying water for human consumption - Part 1: General
Norm
ÖNORM EN 806-3
Issue date : 2006 08 01
Specifications for installations inside buildings conveying water for human consumption - Part 3: Pipe sizing - Simplified method
Norm
ÖNORM EN 1057
Issue date : 2010 04 01
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
Norm
ÖNORM B 2501
Issue date : 2016 08 01
Drainage systems for buildings and sites - Design, construction and testing - Supplementary guidelines to ÖNORM EN 12056 and ÖNORM EN 752
Norm
ÖNORM B 2530-2
Issue date : 2005 04 01
Water supply - Water distribution - Part 2: Graphic symbols
Norm
ÖNORM B 2531-2
Issue date : 1978 12 01
Drinking water supply systems on premises; dimensioning of conduits
Norm
ÖNORM B 2538
Issue date : 2018 02 01
Water supply - Requirements for systems and components outside buildings - Additional specifications concerning ÖNORM EN 805
Norm
ÖNORM B 5013-1
Issue date : 2013 12 15
Corrosion protection by organic coatings for water and wastewater engineering in residential areas - Part 1: Assesment of corrosion probability and protection of unalloyed and low-alloyed ferrous materials
Norm
ÖNORM B 5013-2
Issue date : 2013 12 15
Corrosion protection by organic coatings for water and waste water engineering in residential areas - Part 2: Assesment of corrosion probability and protection of cement-bound materials
Norm
ÖNORM B 5014-1
Issue date : 2016 08 15
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 1: Organic materials
Norm
ÖNORM B 5157
Issue date : 1999 04 01
Systems of composite plastics pipes for hot and cold water - Dimensions, requirements, tests, marking of conformity
Norm
ÖNORM B 5161
Issue date : 2022 01 15
Plastics piping systems for water supply and for drainage and sewerage with or without pressure - Pipes, joints and fittings made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Supplementary requirements to ÖNORM EN ISO 23856
Norm
ÖNORM B 5162
Issue date : 2002 11 01
Glass fibre reinforced plastic pipes - Wound pipes, joints and fittings made of GF-UP - Dimensions, requirements, tests and marking of conformity
Norm
ÖNORM B 5170
Issue date : 2001 05 01
Low density polyethylene pipes (PE 40) for water pipelines - Dimensions, requirements, tests, marking of conformity
Norm
ÖNORM B 5172
Issue date : 2000 04 01
High density polyethylene pipes (PE 80, PE 100) for water pipelines - Dimensions, requirements, tests, marking of conformity
Norm
ÖNORM B 5174
Issue date : 2007 03 01
Pipes of polypropylene for special applications - Dimensions, requirements, tests, proof of conformity
Norm
ÖNORM B 8115-2
Issue date : 2021 04 15
Sound insulation and room acoustics in building construction - Part 2: Methodology for the determination of sound insulation levels
Norm
ÖNORM EN 200
Issue date : 2024 05 01
Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification
Norm
ÖNORM EN 512
Issue date : 2018 07 15
Fibre-cement products - Pressure pipes and joints
Norm
ÖNORM EN 545
Issue date : 2011 03 15
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
Norm
ÖNORM EN 805
Issue date : 2000 08 01
Water supply - Requirements for systems and components outside buildings
Norm
ÖNORM EN 806-1
Issue date : 2001 03 01
Specifications for installations inside buildings conveying water for human consumption - Part 1: General
Norm
ÖNORM EN 806-3
Issue date : 2013 08 01
Specifications for installations inside buildings conveying water for human consumption - Part 3: Pipe sizing - Simplified method
Norm
ÖNORM EN 1057
Issue date : 2010 04 01
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
Norm
ÖNORM EN 1452-1
Issue date : 2000 02 01
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General
Norm
ÖNORM EN 1452-2
Issue date : 2000 02 01
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes
Norm
ÖNORM EN 1452-3
Issue date : 2000 02 01
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings
Norm
ÖNORM EN 1452-4
Issue date : 2000 02 01
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves and ancillary equipment
Norm
ÖNORM EN 1452-5
Issue date : 2000 02 01
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system
Norm
ÖNORM EN 10216-1
Issue date : 2014 02 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
Norm
ÖNORM EN 10216-2
Issue date : 2020 03 15
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
Norm
ÖNORM EN 10216-3
Issue date : 2014 02 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
Norm
ÖNORM EN 10216-4
Issue date : 2014 02 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
Norm
ÖNORM EN 10216-5
Issue date : 2021 06 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
Norm
ÖNORM EN 10217-1
Issue date : 2019 07 15
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
Norm
ÖNORM EN 10217-2
Issue date : 2019 07 15
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
Norm
ÖNORM EN 10217-3
Issue date : 2019 07 15
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
Norm
ÖNORM EN 10217-4
Issue date : 2019 07 15
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
Norm
ÖNORM EN 10217-5
Issue date : 2019 07 15
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
Norm
ÖNORM EN 10217-6
Issue date : 2019 07 15
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
Norm
ÖNORM EN 10217-7
Issue date : 2021 06 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
Norm
ÖNORM EN 10224
Issue date : 2007 12 01
Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions (consolidated version)
Norm
ÖNORM EN 10312
Issue date : 2007 12 01
Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions (consolidated version)
Norm
ÖNORM EN 12056-3
Issue date : 2000 12 01
Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation
Norm
ÖNORM EN 12201-1
Issue date : 2024 08 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
Norm
ÖNORM EN 12201-2
Issue date : 2024 08 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
Norm
ÖNORM EN 12201-3
Issue date : 2024 08 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings
Norm
ÖNORM EN 12201-4
Issue date : 2024 08 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves
Norm
ÖNORM EN 12201-5
Issue date : 2024 08 01
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
Norm
ÖNORM EN 12828
Issue date : 2014 05 15
Heating systems in buildings - Design for water-based heating systems
Norm
ÖNORM EN 12842
Issue date : 2012 10 01
Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
Norm
ÖNORM EN ISO 15874-1
Issue date : 2023 02 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013 + Amd.1:2022) (consolidated version)
Norm
ÖNORM EN ISO 15874-2
Issue date : 2023 02 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013 + Amd.1:2018 + Amd.2:2022) (consolidated version)
Norm
ÖNORM EN ISO 15874-3
Issue date : 2022 11 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013 + Amd.1:2018 + Amd.2:2021) (consolidated version)
Norm
ÖNORM EN ISO 15874-5
Issue date : 2021 11 01
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system (ISO 15874-5:2013 + Amd.1:2018) (consolidated version)
Norm
ÖNORM EN ISO 15875-1
Issue date : 2021 07 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2003 + Amd.1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15875-2
Issue date : 2021 07 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2003 + Amd 1:2007 + Amd 2:2020) (consolidated version)
Norm
ÖNORM EN ISO 15875-3
Issue date : 2022 04 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003 + Amd.1:2020 + Amd.2:2021) (consolidated version)
Norm
ÖNORM EN ISO 15875-5
Issue date : 2021 07 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003 + Amd.1:2020) (consolidated version)
Norm
ÖNORM EN ISO 15876-1
Issue date : 2021 11 01
Plastics piping systems for hot and cold water installations – Polybutene (PB) – Part 1: General (ISO 15876-1:2017)
Norm
ÖNORM EN ISO 15876-2
Issue date : 2021 11 01
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017 + Amd.1:2020) (consolidated version)
Norm
ÖNORM EN ISO 15876-3
Issue date : 2022 11 01
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017 + Amd.1:2020 + Amd.2:2021) (consolidated version)
Norm
ÖNORM EN ISO 15876-5
Issue date : 2021 11 01
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017 + Amd.1:2020) (consolidated version)
Norm
ÖNORM EN ISO 15877-1
Issue date : 2021 07 01
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2009 + Amd.1:2010) (consolidated version)
Norm
ÖNORM EN ISO 15877-2
Issue date : 2021 07 01
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO 15877-2:2009 + Amd.1:2010 + Amd.2:2020) (consolidated version)
Norm
ÖNORM EN ISO 15877-3
Issue date : 2022 04 01
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO 15877-3:2009 + Amd.1:2010 + Amd.2:2021) (consolidated version)
Norm
ÖNORM EN ISO 15877-5
Issue date : 2021 07 01
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2009 + Amd.1:2010 + Amd.2:2020) (consolidated version)
Norm
ÖNORM H 2202
Issue date : 2002 07 01
Gas-, water- and sewage systems installations - Works contract
Norm
ÖNORM M 5611
Issue date : 1981 10 01
Steel tubes; medium-weight suitable for screwing
Norm
ÖNORM M 5612
Issue date : 1981 10 01
Steel tubes; heavy-weight suitable for screwing
Norm
ÖNORM M 7580
Issue date : 1985 06 01
Insulation of heating installations; requirements, certificates, calculations
Norm
ÖNORM M 7826-1
Issue date : 2012 08 01
Soldering and brazing of copper pipes used for installation purposes - Part 1: Filler metals and fluxes
Norm
ÖNORM M 7826-2
Issue date : 2012 08 01
Soldering and brazing of copper pipes used for installation purposes - Part 2: Performance and testing of soldered and brazed joints
Norm
ÖVE/ÖNORM E 8001-1
Issue date : 2010 03 01
Erection of electrical installations with rated voltages up to AC 1000 V and DC 1500 V - Part 1: Definitions and measures against electric shock (consolidated version)
Norm
ÖNORM B 2531
Issue date : 2012 09 01
Specifications for installations inside buildings conveying water for human consumption - National supplements to ÖNORMEN EN 806-1 to -5
Gesetz
Gesetz, mit dem das Wasserversorgungsgesetz geändert wird