Please select and order
€143.05
excl. VAT
Add to cart
Norm

ÖNORM EN 858-1

Issue date: 2005 04 01

Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control (consolidated version)

This standard specifies definitions, nominal sizes, principles of design, performance requirements, marking, testing and quality control for separator systems for light ...
Valid
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 61 Pages
Language:
German | English | Download GER/ENG
Optionally co-design standards:
This standard specifies definitions, nominal sizes, principles of design, performance requirements, marking, testing and quality control for separator systems for light liquids. This standard applies to separator systems for light liquids, where light liquids are separated from waste water by means of gravity and/or coalescence. This standard does not apply to the treatment of stable emulsions, solutions of light liquids and water, grease and oils of vegetable and animal origin.
ÖNORM EN 858-1
2005 04 01
Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, pe...
Norm
ÖNORM EN 858-1
2003 03 01
Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, pe...
Norm
ÖNORM EN 858-1
2002 07 01
Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, pe...
Norm
Norm
ISO 1083:2004
Issue date : 2004 07 16
Spheroidal graphite cast irons - Classification
Norm
ISO 1133:2005
Issue date : 2005 06 07
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
Norm
ISO 1518:1992
Issue date : 1992 03 19
Paints and varnishes — Scratch test
Norm
ISO 178:2001
Issue date : 2001 12 20
Plastics — Determination of flexural properties
Draft
ISO/DIS 178
Issue date : 2008 06 26
Plastics — Determination of flexural properties
Norm
ISO 180:2000
Issue date : 2000 12 14
Plastics — Determination of Izod impact strength
Norm
ISO 1817:2005
Issue date : 2005 10 25
Rubber, vulcanized — Determination of the effect of liquids (Corrected version 2006-02)
Norm
ISO 185:2005
Issue date : 2005 08 26
Grey cast irons — Classification
Norm
ISO 2409:2007
Issue date : 2007 05 11
Paints and varnishes — Cross-cut test
Norm
ISO 2808:2007
Issue date : 2007 01 15
Paints and varnishes — Determination of film thickness
Norm
ISO 2812-1:2007
Issue date : 2007 01 10
Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water
Norm
ISO 2812-2:2007
Issue date : 2007 01 10
Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method
Norm
ISO 2815:2003
Issue date : 2003 04 08
Paints and varnishes — Buchholz indentation test
Norm
ISO 3755:1991
Issue date : 1991 10 17
Cast carbon steels for general engineering purposes
Norm
ISO 4624:2002
Issue date : 2002 03 07
Paints and varnishes — Pull-off test for adhesion
Norm
ISO 4628-2:2003
Issue date : 2003 09 10
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering
Norm
ISO 4628-3:2003
Issue date : 2003 09 10
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
Norm
ISO 48:2007
Issue date : 2007 06 11
Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
Norm
ISO 527-2:1993
Issue date : 1993 06 10
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Norm
ISO 630:1995
Issue date : 1995 11 09
Structural steels — Plates, wide flats, bars, sections and profiles
Norm
ISO 8217:2005
Issue date : 2005 11 18
Petroleum products — Fuels (class F) — Specifications of marine fuels
Norm
ISO 877:1994
Issue date : 1994 08 04
Plastics — Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors
Norm
ÖNORM EN 10088-1
Issue date : 2005 09 01
Stainless steels - Part 1: List of stainless steels
Norm
ÖNORM EN 10088-2
Issue date : 2005 09 01
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Norm
ÖNORM EN 10088-3
Issue date : 2005 09 01
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Norm
ÖNORM EN 124
Issue date : 1995 01 01
Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control
Norm
ÖNORM EN 124
Issue date : 2007 09 01
Gully tops and manhole tops for vehicular and pedestrian areas
Norm
ÖNORM EN 13501-1
Issue date : 2007 05 01
Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
Norm
ÖNORM EN 228
Issue date : 2009 01 01
Automotive fuels - Unleaded petrol - Requirements and test methods
Norm
ÖNORM EN 476
Issue date : 1998 04 01
General requirements for components used in discharge pipes, drains and sewers for gravity systems
Norm
ÖNORM EN 476
Issue date : 2008 07 01
General requirements for components used in drains and sewers
Norm
ÖNORM EN 976-1
Issue date : 1998 04 01
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: ............(abbreviated)
Norm
ÖNORM EN 978
Issue date : 1998 04 01
Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta
Norm
ÖNORM EN ISO 1172
Issue date : 1999 01 01
Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996)
Norm
ÖNORM EN ISO 1514
Issue date : 2005 02 01
Paints and varnishes - Standard panels for testing (ISO 1514:2004)
Norm
ÖNORM EN ISO 15607
Issue date : 2004 03 01
Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
Norm
ÖNORM EN ISO 15609-1
Issue date : 2005 01 01
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
Norm
ÖNORM EN ISO 15614-1
Issue date : 2005 02 01
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004)
Norm
ÖNORM EN ISO 9377-2
Issue date : 2001 06 01
Water quality - Determination of hydrocarbon oil index - Part 2: Method using solvent extraction and gas chromatography (ISO 9377-2:2000)
Norm
ISO 48:2010
Issue date : 2010 09 03
Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
Norm
ISO 178:2019
Issue date : 2019 04 01
Plastics — Determination of flexural properties
Norm
ISO 180:2019
Issue date : 2019 11 29
Plastics — Determination of Izod impact strength
Norm
ISO 185:2020
Issue date : 2020 05 29
Grey cast irons — Classification
Norm
ISO 527-2:2012
Issue date : 2012 02 22
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Norm
ISO 630:1995
Issue date : 1995 11 09
Structural steels — Plates, wide flats, bars, sections and profiles
Norm
ISO 877:1994
Issue date : 1994 08 04
Plastics — Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors
Norm
ISO 1083:2018
Issue date : 2018 05 03
Spheroidal graphite cast irons — Classification
Norm
ISO 1133:2005
Issue date : 2005 06 07
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
Norm
ISO 1518:1992
Issue date : 1992 03 19
Paints and varnishes — Scratch test
Norm
ISO 1817:2015
Issue date : 2015 02 11
Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
Norm
ISO 1920:1976
Issue date : 1976 04 01
Concrete tests — Dimensions, tolerances and applicability of test specimens
Norm
ISO 2409:2020
Issue date : 2020 08 31
Paints and varnishes — Cross-cut test
Norm
ISO 2736-1:1986
Issue date : 1986 08 14
Concrete tests — Test specimens — Part 1: Sampling of fresh concrete
Norm
ISO 2736-2:1986
Issue date : 1986 09 18
Concrete tests — Test specimens — Part 2: Making and curing of test specimens for strength tests
Norm
ISO 2808:2019
Issue date : 2019 07 26
Paints and varnishes — Determination of film thickness
Norm
ISO 2812-1:2017
Issue date : 2017 11 10
Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water
Norm
ISO 2812-2:2018
Issue date : 2018 11 06
Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method
Norm
ISO 2815:2003
Issue date : 2003 04 08
Paints and varnishes — Buchholz indentation test
Norm
ISO 3755:1991
Issue date : 1991 10 17
Cast carbon steels for general engineering purposes
Norm
ISO 4012:1978
Issue date : 1978 11 01
Concrete — Determination of compressive strength of test specimens
Norm
ISO 4624:2016
Issue date : 2016 02 25
Paints and varnishes — Pull-off test for adhesion
Norm
ISO 4628-2:2016
Issue date : 2016 01 12
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering
Norm
ISO 4628-3:2016
Issue date : 2016 01 12
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
Norm
ISO 7253:1996
Issue date : 1996 12 12
Paints and varnishes — Determination of resistance to neutral salt spray (fog)
Norm
ISO 8217:2017
Issue date : 2017 03 17
Petroleum products — Fuels (class F) — Specifications of marine fuels