Please select and order
€109.76
excl. VAT
Add to cart
Norm

ÖNORM EN 845-2

Issue date: 2003 07 01

Specification for ancillary components for masonry - Part 2: Lintels

This European Standard specifies requirements for prefabricated lintels for spans over clear openings in a masonry wall up to a maximum of 4,5 m and made from steel, aut...
Withdrawn: 2013 07 01
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 37 Pages
Language:
German | English | Download GER/ENG
Currently valid:
This European Standard specifies requirements for prefabricated lintels for spans over clear openings in a masonry wall up to a maximum of 4,5 m and made from steel, autoclaved aerated concrete, manufactured stone, concrete, fired clay units, calcium silicate units, natural stone units, or using a combination of these materials. Prefabricated lintels can be either complete lintels or the prefabricated part of a composite lintel. This European Standard is not applicable to: a) Lintels completely made on site; b) Lintels, the tensile parts of which are made on site; c) Timber lintels; d) Natural stone lintels, not reinforced. Linear components spanning clear openings greater than 4,5 m in masonry walls and linear components intended for use independently in a structural role (e.g. beams) are not covered by this standard.
ÖNORM EN 845-2
2017 01 15
Specification for ancillary components for masonry - Part 2: Lintels
Norm
ÖNORM EN 845-2
2013 07 01
Specification for ancillary components for masonry - Part 2: Lintels
Norm
ÖNORM EN 845-2
2003 07 01
Specification for ancillary components for masonry - Part 2: Lintels
Norm
ÖNORM EN 845-2
2002 01 01
Specification for ancillary components for masonry - Part 2: Lintels
Norm
Expand
Norm
ISO 1463:2003
Issue date : 2003 03 12
Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
Norm
ÖNORM EN 10025-1
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 1: General technical delivery conditions
Norm
ÖNORM EN 10025-2
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Norm
ÖNORM EN 10025-3
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
Norm
ÖNORM EN 10025-4
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
Norm
ÖNORM EN 10025-5
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
Norm
ÖNORM EN 10088-1
Issue date : 2005 09 01
Stainless steels - Part 1: List of stainless steels
Norm
ÖNORM EN 10088-2
Issue date : 2005 09 01
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Norm
ÖNORM EN 10088-3
Issue date : 2005 09 01
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Norm
ÖNORM EN 990
Issue date : 2003 02 01
Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure
Norm
ÖNORM EN 10111
Issue date : 2008 09 01
Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions
Norm
ÖNORM EN ISO 1461
Issue date : 2009 08 01
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
Norm
ÖNORM EN 846-9
Issue date : 2000 05 01
Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels
Norm
ÖNORM EN 846-11
Issue date : 2000 05 01
Methods of test for ancillary components for masonry - Part 11: Determination of dimensions and bow of lintels
Norm
ÖNORM EN 772-1
Issue date : 2011 06 15
Methods of test for masonry units - Part 1: Determination of compressive strength
Norm
ÖNORM EN 846-13
Issue date : 2001 12 01
Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings
Norm
ÖNORM EN 1745
Issue date : 2012 06 15
Masonry and masonry products - Methods for determining thermal properties
Norm
ÖNORM EN 998-2
Issue date : 2010 11 01
Specification for mortar for masonry - Part 2: Masonry mortar
Norm
ÖNORM EN 10080
Issue date : 2005 09 01
Steel for the reinforcement of concrete - Weldable reinforcing steel - General
Norm
ÖNORM EN 771-6
Issue date : 2011 06 15
Specification for masonry units - Part 6: Natural stone masonry units
Norm
ÖNORM EN 10130
Issue date : 2007 03 01
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
Norm
ÖNORM EN 13501-2
Issue date : 2010 02 15
Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
Norm
ÖNORM EN 12602
Issue date : 2008 09 01
Prefabricated reinforced components of autoclaved aerated concrete
Norm
ÖNORM EN 771-1
Issue date : 2011 06 15
Specification for masonry units - Part 1: Clay masonry units
Norm
ÖNORM EN 771-4
Issue date : 2011 06 15
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units
Norm
ÖNORM EN 772-11
Issue date : 2011 06 15
Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units
Norm
ÖNORM EN 771-5
Issue date : 2011 06 15
Specification for masonry units - Part 5: Manufactured stone masonry units
Norm
ÖNORM EN 771-3
Issue date : 2011 06 15
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates)
Norm
ÖNORM EN 771-2
Issue date : 2011 06 15
Specification for masonry units - Part 2: Calcium silicate masonry units
Norm
ÖNORM EN 12620
Issue date : 2013 07 15
Aggregates for concrete
Norm
ISO 1463:2021
Issue date : 2021 05 11
Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
Norm
ÖNORM EN 845-2
Issue date : 2013 07 01
Specification for ancillary components for masonry - Part 2: Lintels