Please select and order
€98.22
excl. VAT
Add to cart
Norm

ÖNORM EN 10025-1

Issue date: 2005 02 01

Hot rolled products of structural steels - Part 1: General technical delivery conditions

1.1 This document specifies requirements for flat and long products (see Clause 3) of hot rolled structural steels excluding structural hollow sections and tubes. Part 1...
Valid
§ Legal References
1.1 This document specifies requirements for flat and long products (see Clause 3) of hot rolled structural steels excluding structural hollow sections and tubes. Part 1 of this document specifies the general delivery conditions. The specific requirements for structural steels are given in the following Parts: Part 2: Technical delivery conditions for non-alloy structural steels Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition The steels specified in this document are intended for use in welded, bolted and riveted structures. 1.2 This document does not apply to coated products or to steel products for general structural applications in accordance with the standards and draft standards listed in the Bibliography.
ÖNORM EN 10025-1
2005 02 01
Hot rolled products of structural steels - Part 1: General technical delivery conditions
Norm
ÖNORM EN 10137-1
1996 02 01
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or ...
Norm
ÖNORM EN 10137-2
1996 02 01
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or ...
Norm
ÖNORM EN 10025
1994 03 01
Hot rolled products of non-alloy structural steels - Technical delivery conditions (includes amendme...
Norm
ÖNORM EN 10155
1993 10 01
Structural steels with improved atmospheric corrosion resistance - Technical delivery conditions
Norm
ÖNORM EN 10113-2
1993 07 01
Hot-rolled products in weldable fine grain structural steels - Part 2: Delivery conditions for norma...
Norm
ÖNORM EN 10113-3
1993 07 01
Hot-rolled products in weldable fine grain structural steels - Part 3: Delivery conditions for therm...
Norm
ÖNORM EN 10113-1
1993 07 01
Hot-rolled products in weldable fine grain structural steels - Part 1: General delivery conditions
Norm
ÖNORM M 3116
1980 03 01
Steels for general structural purposes; quality specifications
Norm
ÖNORM M 3115
1975 02 01
Structural steel; special quality T
Norm
ÖNORM M 3115
1968 11 01
Structural steel; special quality T
Norm
ÖNORM M 3111
1967 02 01
Maschinenbaustahl; unlegiert, geschmiedet oder gewalzt
Norm
ÖNORM M 3111
1965 08 01
Maschinenbaustahl; unlegiert, geschmiedet oder gewalzt
Norm
ÖNORM M 3114
1955 04 12
Baustahl-Sondergüte S für den Hoch- und Brückenbau
Norm
ÖNORM M 3114
1951 04 19
Baustahl-Sondergüte S für den Hoch- und Brückenbau
Norm
ÖNORM M 3111
1951 04 18
Maschinenbaustahl; unlegiert, geschmiedet oder gewalzt
Norm
ÖNORM M 3112
1951 04 10
Baustahl-Güte H
Norm
ÖNORM M 3114
1950 12 07
Baustahl-Sondergüte S für den Hoch- und Brückenbau
Norm
ÖNORM M 3111
1950 11 28
Maschinenbaustahl; unlegiert, geschmiedet oder gewalzt
Norm
ÖNORM M 3115
1950 05 05
Hoch- und Brückenbaustahl; Sondergüte T
Norm
ÖNORM M 3112
1950 03 30
Baustahl; Normalgüte für den allgemeinen Stahlbau
Norm
ÖNORM M 3112
1934 08 15
Flußstahl, unlegiert, gewalzt
Norm
ÖNORM M 3112
1930 03 01
Flußstahl, unlegiert, gewalzt
Norm
ÖNORM M 3111
1930 03 01
Maschinenbaustahl; unlegiert, geschmiedet oder gewalzt
Norm
Expand
Norm
ÖNORM EN 10002-1
Issue date : 2002 01 01
Metallic materials - Tensile testing - Part 1: Method of test at ambient temperature
Norm
ÖNORM EN 10017
Issue date : 2005 01 01
Steel rod for drawing and/or cold rolling - Dimensions and tolerances
Norm
ÖNORM EN 10020
Issue date : 2000 06 01
Definition and classification of grades of steel
Norm
ÖNORM EN 10021
Issue date : 2007 04 01
General technical delivery conditions for steel products
Norm
ÖNORM EN 10024
Issue date : 1995 06 01
Hot rolled taper flange I sections - Tolerances on shape and dimensions
Norm
ÖNORM EN 10025-2
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Norm
ÖNORM EN 10025-3
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
Norm
ÖNORM EN 10025-4
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
Norm
ÖNORM EN 10025-5
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
Norm
ÖNORM EN 10025-6
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
Norm
ÖNORM EN 10027-1
Issue date : 2006 02 01
Designation systems for steels - Part 1: Steel names
Norm
ÖNORM EN 10027-2
Issue date : 1992 12 01
Designation systems for steel - Numerical system
Norm
ÖNORM EN 10029
Issue date : 1991 11 01
Hot rolled steel plates 3 mm thick or above - Tolerances on dimensions, shape and mass
Norm
ÖNORM EN 10034
Issue date : 1994 03 01
Structural steel I and H sections - Tolerances on shape and dimensions
Norm
ÖNORM EN 10045-1
Issue date : 1991 05 01
Metallic materials - Charpy impact test - Part 1: Test method
Norm
ÖNORM EN 10048
Issue date : 1996 11 01
Hot rolled narrow steel strip - Tolerances on dimensions and shape
Norm
ÖNORM EN 10051
Issue date : 1997 12 01
Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - Tolerances on dimensions and shape (includes amendment A1:1997)
Norm
ÖNORM EN 10052
Issue date : 1994 03 01
Vocabulary of heat treatment terms for ferrous products
Norm
ÖNORM EN 10055
Issue date : 1996 01 01
Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions
Norm
ÖNORM EN 10056-1
Issue date : 1998 11 01
Structural steel equal and unequal leg angles - Part 1: Dimensions
Norm
ÖNORM EN 10056-2
Issue date : 1993 12 01
Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions
Norm
ÖNORM EN 10058
Issue date : 2004 04 01
Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions
Norm
ÖNORM EN 10059
Issue date : 2004 04 01
Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
Norm
ÖNORM EN 10060
Issue date : 2004 04 01
Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
Norm
ÖNORM EN 10061
Issue date : 2004 04 01
Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
Norm
ÖNORM EN 10067
Issue date : 1997 01 01
Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass
Norm
ÖNORM EN 10079
Issue date : 2007 08 01
Definition of steel products
Norm
ÖNORM EN 10160
Issue date : 1999 10 01
Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
Norm
ÖNORM EN 10162
Issue date : 2003 12 01
Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
Norm
ÖNORM EN 10164
Issue date : 2005 03 01
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
Norm
ÖNORM EN 10168
Issue date : 2004 10 01
Steel products - Inspection documents - List of information and description
Norm
ÖNORM EN 10204
Issue date : 2005 01 01
Metallic products - Types of inspection documents
Norm
ÖNORM EN 10279
Issue date : 2000 05 01
Hot rolled steel channels - Tolerances on shape, dimensions and mass
Norm
ÖNORM EN 10306
Issue date : 2002 08 01
Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams
Norm
ÖNORM EN 10308
Issue date : 2002 04 01
Non destructive testing - Ultrasonic testing of steel bars
Norm
ÖNORM EN ISO 14284
Issue date : 2003 03 01
Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
Norm
ÖNORM EN ISO 17642-1
Issue date : 2004 10 01
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17642-1:2004)
Norm
ÖNORM EN ISO 17642-2
Issue date : 2005 06 01
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17642-2:2005)
Norm
ÖNORM EN ISO 17642-3
Issue date : 2005 06 01
Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005)
Norm
ÖNORM EN ISO 2566-1
Issue date : 1999 10 01
Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
Norm
ÖNORM EN ISO 377
Issue date : 1997 10 01
Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997)
Norm
ÖNORM EN ISO 643
Issue date : 2003 09 01
Steels - Micrographic determination of the apparent grain size (ISO 643:2003)
Norm
ÖNORM EN ISO 9001
Issue date : 2008 12 01
Quality management systems - Requirements (ISO 9001:2008)