Please select and order
€98.22
excl. VAT
Add to cart
Norm

ÖNORM EN 10025-2

Issue date: 2005 02 01

Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels

Part 2 of this document, in addition to Part 1, specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for fur...
Withdrawn: 2019 09 15
§ Legal References
Part 2 of this document, in addition to Part 1, specifies the technical delivery conditions for flat and long products and semi-finished products which are meant for further processing to flat and long products of hot rolled non-alloy quality steels in the grades and qualities given in Tables 2 to 6 (chemical composition) and Tables 7 to 9 (mechanical properties) in the delivery conditions as given in 6.3. Three engineering steels are also specified in this document (see Tables 3 and 5) (chemical composition) and Table 8 (mechanical properties). This document does not apply to structural hollow sections and tubes (see EN 10210-1 and EN 10219-1). The technical delivery conditions apply to thicknesses 3 mm and 150 mm for long products of steel grade S450J0. The technical delivery conditions apply to thicknesses 250 mm for flat and long products of all other grades and qualities. In addition for flat products of qualities J2 and K2 the technical conditions apply to thicknesses 400 mm. Products made of steel grades S185, E295, E335 and E360 cannot be CE marked. The steels specified in this Part 2 are not intended to be heat treated except products delivered in delivery condition +N. Stress relief annealing is permitted (see also the NOTE in 7.3.1.1 of EN 10025-1:2004). Products delivered in +N condition can be hot formed and/or normalized after delivery (see Clause 3). NOTE 1 Semi-finished products which are to be converted to rolled finished products conforming to this document should be the subject of special agreement at the time of the enquiry and order. The chemical composition can also be agreed at the time of the order, however the values should be within the limits of Tables 2 and 3. NOTE 2 For certain grades and product forms suitability for particular applications may be specified at the time of the enquiry and order (see 7.4.2, 7.4.3 and Table 10).
ÖNORM EN 10025-2
2019 09 15
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy struc...
Norm
ÖNORM EN 10025-2
2005 02 01
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy struc...
Norm
ÖNORM EN 10025
1994 03 01
Hot rolled products of non-alloy structural steels - Technical delivery conditions (includes amendme...
Norm
ÖNORM M 3116
1980 03 01
Steels for general structural purposes; quality specifications
Norm
ÖNORM M 3115
1975 02 01
Structural steel; special quality T
Norm
ÖNORM M 3115
1968 11 01
Structural steel; special quality T
Norm
ÖNORM M 3111
1967 02 01
Maschinenbaustahl; unlegiert, geschmiedet oder gewalzt
Norm
ÖNORM M 3111
1965 08 01
Maschinenbaustahl; unlegiert, geschmiedet oder gewalzt
Norm
ÖNORM M 3114
1955 04 12
Baustahl-Sondergüte S für den Hoch- und Brückenbau
Norm
ÖNORM M 3114
1951 04 19
Baustahl-Sondergüte S für den Hoch- und Brückenbau
Norm
ÖNORM M 3111
1951 04 18
Maschinenbaustahl; unlegiert, geschmiedet oder gewalzt
Norm
ÖNORM M 3112
1951 04 10
Baustahl-Güte H
Norm
ÖNORM M 3114
1950 12 07
Baustahl-Sondergüte S für den Hoch- und Brückenbau
Norm
ÖNORM M 3111
1950 11 28
Maschinenbaustahl; unlegiert, geschmiedet oder gewalzt
Norm
ÖNORM M 3115
1950 05 05
Hoch- und Brückenbaustahl; Sondergüte T
Norm
ÖNORM M 3112
1950 03 30
Baustahl; Normalgüte für den allgemeinen Stahlbau
Norm
ÖNORM M 3112
1934 08 15
Flußstahl, unlegiert, gewalzt
Norm
ÖNORM M 3111
1930 03 01
Maschinenbaustahl; unlegiert, geschmiedet oder gewalzt
Norm
ÖNORM M 3112
1930 03 01
Flußstahl, unlegiert, gewalzt
Norm
Expand
Norm
ÖNORM EN 10020
Issue date : 2000 06 01
Definition and classification of grades of steel
Norm
ÖNORM EN 10029
Issue date : 2011 01 01
Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
Norm
ÖNORM EN 10163-3
Issue date : 2005 03 01
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections
Norm
ÖNORM EN 10163-2
Issue date : 2005 03 01
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
Norm
ÖNORM EN 10051
Issue date : 2011 01 01
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
Norm
ÖNORM EN 10027-1
Issue date : 2006 02 01
Designation systems for steels - Part 1: Steel names
Norm
ÖNORM EN 10027-2
Issue date : 1992 12 01
Designation systems for steel - Numerical system
Norm
ÖNORM EN 10164
Issue date : 2005 03 01
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
Norm
ÖNORM EN 10034
Issue date : 1994 03 01
Structural steel I and H sections - Tolerances on shape and dimensions
Norm
ÖNORM EN 10056-2
Issue date : 1993 12 01
Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions
Norm
ÖNORM EN 10024
Issue date : 1995 06 01
Hot rolled taper flange I sections - Tolerances on shape and dimensions
Norm
ÖNORM EN 10221
Issue date : 1996 01 01
Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
Norm
ÖNORM EN 10055
Issue date : 1996 01 01
Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions
Norm
ÖNORM EN 10048
Issue date : 1996 11 01
Hot rolled narrow steel strip - Tolerances on dimensions and shape
Norm
ÖNORM EN 10067
Issue date : 1997 01 01
Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass
Norm
ÖNORM EN 10056-1
Issue date : 1998 11 01
Structural steel equal and unequal leg angles - Part 1: Dimensions
Norm
ÖNORM EN 10160
Issue date : 1999 10 01
Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
Norm
ÖNORM EN 10279
Issue date : 2000 05 01
Hot rolled steel channels - Tolerances on shape, dimensions and mass
Norm
ÖNORM EN 1011-2
Issue date : 2004 05 01
Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels (EN 1011-2:2001 + A1:2003)
Norm
ÖNORM EN 10308
Issue date : 2002 04 01
Non destructive testing - Ultrasonic testing of steel bars
Norm
ÖNORM EN 10306
Issue date : 2002 08 01
Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams
Norm
ÖNORM EN ISO 643
Issue date : 2003 09 01
Steels - Micrographic determination of the apparent grain size (ISO 643:2003)
Norm
ÖNORM EN 10162
Issue date : 2003 12 01
Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
Norm
ÖNORM EN 10058
Issue date : 2004 04 01
Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions
Norm
ÖNORM EN 10060
Issue date : 2004 04 01
Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
Norm
ÖNORM EN 10059
Issue date : 2004 04 01
Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
Norm
ÖNORM EN 10061
Issue date : 2004 04 01
Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
Norm
ÖNORM EN 10017
Issue date : 2005 01 01
Steel rod for drawing and/or cold rolling - Dimensions and tolerances
Norm
ÖNORM EN 10025-1
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 1: General technical delivery conditions
Norm
ÖNORM EN 10163-1
Issue date : 2008 02 01
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements (consolidated version)
Norm
ÖNORM EN 10025-2
Issue date : 2019 09 15
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels