Please select and order
€98.22
excl. VAT
Add to cart
Norm

ÖNORM EN 818-7

Issue date: 2002 05 01

Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)

This European Standard specifies the requirements related to safety for hoist chain, Grade T (type T quenched and tempered and types DAT and DT case hardened), for use in...
Withdrawn: 2008 07 01
§ Legal References
This European Standard specifies the requirements related to safety for hoist chain, Grade T (type T quenched and tempered and types DAT and DT case hardened), for use in serial chain hoists manual and power driven. Type DAT and type DT hoist chains possess surface hardnesses greater than core hardness and are used for power driven chain hoists to offer greater resistance to wear. Type DT hoist chain differs from DAT hoist chain in having higher surface hardness and/or greater case depth to optimise wear resistance. The standard is applicable to electrically welded round steel short link hoist chains conforming to EN 818-1. The range of nominal size of hoist chains covered by this European Standard is from 4 mm to 22 mm. The hazards covered by this European Standard are identified in clause 4.
ÖNORM EN 818-7
2008 08 01
Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types ...
Norm
ÖNORM EN 818-7
2008 07 01
Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types ...
Norm
ÖNORM EN 818-7
2002 05 01
Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types ...
Norm
Norm
ISO 4301-1:1986
Issue date : 1986 06 26
Cranes and lifting appliances — Classification — Part 1: General
Norm
ISO 4965:1979
Issue date : 1979 04 01
Axial load fatigue testing machines — Dynamic force calibration — Strain gauge technique
Norm
ISO 643:2003
Issue date : 2003 02 06
Steels — Micrographic determination of the apparent grain size
Norm
ISO 6507-1:2005
Issue date : 2005 12 08
Metallic materials — Vickers hardness test — Part 1: Test method
Norm
ÖNORM EN 10025-1
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 1: General technical delivery conditions
Norm
ÖNORM EN 10025-2
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Norm
ÖNORM EN 10025-3
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
Norm
ÖNORM EN 10025-4
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
Norm
ÖNORM EN 10025-5
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
Norm
ÖNORM EN 10025-6
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
Norm
ÖNORM EN 818-1
Issue date : 2008 11 01
Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance
Norm
ÖNORM EN ISO 12100-1
Issue date : 2004 03 01
Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO 12100-1:2003)
Norm
ÖNORM EN ISO 14121-1
Issue date : 2008 01 01
Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007)
Norm
ÖNORM EN ISO 7500-1
Issue date : 2005 02 01
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004)
Norm
ISO 4301-1:2016
Issue date : 2016 06 27
Cranes — Classification — Part 1: General
Norm
ISO 4965:1979
Issue date : 1979 04 01
Axial load fatigue testing machines — Dynamic force calibration — Strain gauge technique
Norm
ISO 6507-1:2018
Issue date : 2018 01 10
Metallic materials — Vickers hardness test — Part 1: Test method
Norm
ÖNORM EN 818-7
Issue date : 2008 07 01
Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)