Please select and order
€98.22
excl. VAT
Add to cart
Norm

ÖNORM EN 303-1

Issue date: 1999 04 01

Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking

Diese ÖNORM gilt für Standardheizkessel und Niedertemperatur-Heizkessel mit Gebläsebrennern bis zu einer Normwärmeleistung von 1 000 kW, die nach den Festlegungen des Kes...
Withdrawn: 2004 03 01
§ Legal References
Diese ÖNORM gilt für Standardheizkessel und Niedertemperatur-Heizkessel mit Gebläsebrennern bis zu einer Normwärmeleistung von 1 000 kW, die nach den Festlegungen des Kesselherstellers entweder mit Unterdruck (Naturzugkessel) oder mit Überdruck (Überdruckkessel) im Brennraum betrieben werden. Festgelegt werden notwendige Begriffe, Bauanforderungen, Prüfungen sowie die Kennzeichnung für Heizkessel, die auf einem anerkannten Kesselprüfstand zu prüfen sind. Heizkessel nach dieser ÖNORM sind bestimmt für die Beheizung von zentralen Heizungsanlagen, deren Wärmeträger Wasser mit einer maximalen Betriebstemperatur bis 100 °C ist. Der maximale Betriebsüberdruck ist 8 bar. Diese Norm gilt für Heizkessel mit einem eingebauten oder einem angebauten Wassererwärmer (Speicher- oder Durchlaufwassererwärmer) nur für die Bauteile des Kessels, die den Betriebsbedingungen des Heizkessels zwangsläufig unterworfen sind (Heizungsteil).
ÖNORM EN 303-1
2017 10 15
Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general require...
Norm
ÖNORM EN 303-1
2004 03 01
Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general require...
Norm
ÖNORM EN 303-1
1999 04 01
Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general require...
Norm
ÖNORM EN 303-1
1993 02 01
Heating boilers - Heating boilers with burners using fans - Terminology, general requirements, testi...
Norm
ÖNORM M 7550
1985 06 01
Boilers for central heating up to 100 degrees C; concepts, requirements, testing, marking of conform...
Norm
ÖNORM DIN 4702-1
1971 10 01
Boilers for central heating; identification, nominal rating, thermal requirements
Norm
Expand
Norm
ISO 185:2005
Issue date : 2005 08 26
Grey cast irons — Classification
Norm
ISO 2553:1992
Issue date : 1992 10 15
Welded, brazed and soldered joints — Symbolic representation on drawings
Norm
ISO 7-1:1994
Issue date : 1994 05 12
Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ISO 7-2:2000
Issue date : 2000 09 21
Pipe threads where pressure-tight joints are made on the threads — Part 2: Verification by means of limit gauges
Norm
ISO 7005-1:1992
Issue date : 1992 04 09
Metallic flanges — Part 1: Steel flanges
Norm
ISO 7005-2:1988
Issue date : 1988 12 08
Metallic flanges — Part 2: Cast iron flanges
Norm
ISO 7005-3:1988
Issue date : 1988 02 18
Metallic flanges — Part 3: Copper alloy and composite flanges
Norm
ÖNORM EN 10021
Issue date : 2007 04 01
General technical delivery conditions for steel products
Norm
ÖNORM EN 10025-1
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 1: General technical delivery conditions
Norm
ÖNORM EN 10025-2
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Norm
ÖNORM EN 10025-3
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
Norm
ÖNORM EN 10025-4
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
Norm
ÖNORM EN 10025-5
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
Norm
ÖNORM EN 10025-6
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
Norm
ÖNORM EN 10027-2
Issue date : 1992 12 01
Designation systems for steel - Numerical system
Norm
ÖNORM EN 10028-1
Issue date : 2008 03 01
Flat products made of steels for pressure purposes - Part 1: General requirements
Norm
ÖNORM EN 10029
Issue date : 1991 11 01
Hot rolled steel plates 3 mm thick or above - Tolerances on dimensions, shape and mass
Norm
ÖNORM EN 10088-2
Issue date : 2005 09 01
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Norm
ÖNORM EN 10120
Issue date : 2009 02 01
Steel sheet and strip for welded gas cylinders
Norm
ÖNORM EN 226
Issue date : 1987 12 01
Atomizing oil burners; connecting dimensions between burners and heat generators
Norm
ÖNORM EN ISO 4063
Issue date : 2000 07 01
Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:1998)
Norm
ÖNORM EN ISO 9606-2
Issue date : 2005 04 01
Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
Norm
ISO 7-1:1994
Issue date : 1994 05 12
Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ISO 7-2:2000
Issue date : 2000 09 21
Pipe threads where pressure-tight joints are made on the threads — Part 2: Verification by means of limit gauges
Norm
ISO 185:2020
Issue date : 2020 05 29
Grey cast irons — Classification
Norm
ISO 2553:2019
Issue date : 2019 03 18
Welding and allied processes — Symbolic representation on drawings — Welded joints (Corrected version 2021-09)
Norm
ISO 7005-1:2011
Issue date : 2011 07 15
Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
Norm
ISO 7005-2:1988
Issue date : 1988 12 08
Metallic flanges — Part 2: Cast iron flanges
Norm
ISO 7005-3:1988
Issue date : 1988 02 18
Metallic flanges — Part 3: Copper alloy and composite flanges
Norm
ÖNORM EN 303-1
Issue date : 2004 03 01
Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking (EN 303-1:1999 + A1:2003)
Verordnung
Verordnung der Landesregierung vom 19.September 2000, mit der nähere Bestimmungen über den Einbau und den Betrieb von Heizungsanlagen für feste und flüssige Brennstoffe, von Anlagen zur Lage