Please select and order
€229.44
excl. VAT
Add to cart
Norm
ÖNORM EN 15001-1
Issue date: 2011 02 15
Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
This European Standard specifies detailed functional requirements for the design, selection of materials,
construction, inspection and testing of
¿ industrial gas insta...
Withdrawn: 2023 08 15
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 127 Pages
Language:
German
| English
| Download GER/ENG
Currently valid:
Optionally co-design standards:
ICS
This European Standard specifies detailed functional requirements for the design, selection of materials,
construction, inspection and testing of
¿ industrial gas installation pipework and assemblies with an operating pressure greater than 0,5 bar, and
¿ non-industrial gas installation pipework (residential and commercial) with an operating pressure greater
than 5 bar in buildings,
starting from the outlet of the network operator’s point of delivery up to the inlet connection to the gas
appliance; normally the inlet isolation valve. This standard also covers the inlet connection to the gas
appliance comprising of the pipework that does not fall within the scope of the appliance standard.
NOTE The use of the term installation and pipework is interchangeable.
This standard applies to gas installations operating at ambient temperatures between - 20 °C and 40 °C and
operating pressures up to and including 60 bar. For operating conditions outside these limitations, reference
should additionally be made to EN 13480 for metallic pipework.
For industrial gas installations up to and including 0,5 bar and for non-industrial (residential and commercial)
gas installations up to and including 5 bar in buildings, EN 1775 applies.
For gas installations that do not fall within the scope of EN 1775 or other European Standards, this standard
applies.
In this standard, the term “gas“ refers to combustible gases, which are gaseous at 15 °C and 1 013 mbar
absolute atmospheric pressure (normal conditions). These gases are commonly referred to as manufactured
gas, natural gas or Liquefied Petroleum Gas (LPG). They are also referred to as first, second or third family
gases (see Table 1 of EN 437:2003). The given values are considered as normal conditions for all volumes
given in this standard.
LPG storage vessels (including all ancillaries fitted directly to storage vessels) are excluded. Also excluded
are LPG installations and sections of LPG installations operating at vapour pressure in the liquid state (e.g.
between the storage vessel and any pressure regulator).
In this standard, all pressures are gauge pressures unless otherwise stated.
This standard has been harmonised to address the essential safety requirements of the Pressure Equipment
Directive (PED, 97/23/EC) relevant for the joining of gas installation pipework (assemblies) falling within the
scope of the PED. These are listed in Annex ZA. However, “this Directive does not cover the assembly of
pressure equipment on the site and under the responsibility of the user, as in the case of industrial
installations” (PED, Preamble, 5th recital, last paragraph).
Although in this respect, the standard takes into account the essential safety requirements of the PED, no
inference can be drawn from this as to whether or not the installation or parts of the installation falls within the
scope of the PED. Reference should be made to the PED and national legislation.
This European Standard specifies common basic principles for gas supply systems. Users of this European
Standard should be aware that more detailed national standards and/or code of practice may exist in the CEN
member countries.
This European Standard is intended to be applied in association with these national standards and/or codes of
practice setting out the above-mentioned basic principles.
ÖNORM EN 15001-1
2023 08 15
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for i...
Norm
ÖNORM EN 15001-1
2011 02 15
Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for i...
Norm
↖
ÖNORM EN 15001-1
2010 08 15
Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for i...
Norm
Norm
Issue date :
1997 02 27
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and alloyed steels with specified elevated temperature properties
Norm
Issue date :
2010 12 01
Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2009)
Norm
Issue date :
1994 05 01
Mechanical properties of fasteners - Part 2 : Nuts with specified proof load values - Coarse thread (ISO 898-2:1992)
Norm
Issue date :
2005 09 01
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Norm
Issue date :
2010 06 01
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
Norm
Issue date :
1997 03 01
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds
Norm
Issue date :
1997 03 01
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
Norm
Issue date :
1997 03 01
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes
Norm
Issue date :
1997 04 01
Non destructive testing - Penetrant testing - Part 1: General principles
Norm
Issue date :
1997 05 01
Non-destructive examination of fusion welds - Visual examination
Norm
Issue date :
1997 06 01
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
Norm
Issue date :
2005 07 01
Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
Norm
Issue date :
2007 12 01
Founding - Spheroidal graphite cast irons (consolidated version)
Norm
Issue date :
2004 06 01
Non-destructive testing of welds - Radiographic testing of welded joints (EN 1435:1997 + A1:2002 + A2:2003)
Norm
Issue date :
2004 06 01
Non-destructive testing of welds - Ultrasonic testing of welded joints (EN 1714:1997 + A1:2002 + A2:2003)
Norm
Issue date :
2010 06 01
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A
Norm
Issue date :
1998 03 01
Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants
Norm
Issue date :
2010 02 15
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009)
Norm
Issue date :
2010 04 01
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009)
Norm
Issue date :
1998 04 01
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
Norm
Issue date :
2007 10 01
Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
Norm
Issue date :
1998 04 01
Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes
Norm
Issue date :
1998 04 01
Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
Norm
Issue date :
1998 04 01
Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
Norm
Issue date :
1998 11 01
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:1998)
Norm
Issue date :
2000 05 01
Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materials
Norm
Issue date :
1999 02 01
Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods
Norm
Issue date :
2004 06 01
Non-destructive testing - Ultrasonic examination - Part 1: General principles (EN 583-1:1998 + A1:2003)
Norm
Issue date :
2009 10 01
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2009)
Norm
Issue date :
2000 04 01
Flanges and their joints - Bolting - Part 1: Selection of bolting
Norm
Issue date :
2000 02 01
Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination
Norm
Issue date :
2000 08 01
Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional recommendations for polyethylene (MOP up to and including 10 bar)
Norm
Issue date :
2000 08 01
Gas supply systems - Pressure testing, commissioning and decommissioning procedures - Functional requirements
Norm
Issue date :
2000 08 01
Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional recommendations for steel
Norm
Issue date :
2006 01 01
Gas supply systems - Gas pressure regulating stations for transmission and distribution - Functional requirements (consolidated version)
Norm
Issue date :
2006 01 01
Gas supply systems - Gas pressure regulating installations on service lines - Functional requirements (consolidated version)
Norm
Issue date :
2000 08 01
Gas supply systems - Welding steel pipework - Functional requirements
Norm
Issue date :
2004 04 01
Brazing - Non-destructive examination of brazed joints (EN 12799:2000 + A1:2003)
Norm
Issue date :
2001 05 01
Flanges and their joints - Gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
Norm
Issue date :
2001 05 01
Flanges and their joints - Gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
Norm
Issue date :
2001 05 01
Cathodic protection of buried or immersed metallic structures - General principles and application for pipelines
Norm
Issue date :
2009 11 01
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2009)
Norm
Issue date :
2007 11 01
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
Norm
Issue date :
2002 05 01
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
Norm
Issue date :
2004 07 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties (EN 10216-1:2002 + A1:2004)
Norm
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties (consolidated version)
Norm
Issue date :
2006 06 01
Metallic industrial piping - Part 2: Materials (consolidated version)
Norm
Issue date :
2004 07 01
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings
Norm
Issue date :
2004 07 01
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings
Norm
Issue date :
2003 02 01
Pressure equipment - Part 5: Compliance and inspection documentation of materials
Norm
Issue date :
2007 11 01
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
Norm
Issue date :
2003 04 01
Seamless and welded steel tubes - Dimensions and masses per unit length
Norm
Issue date :
2003 08 01
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system
Norm
Issue date :
2003 08 01
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes
Norm
Issue date :
2003 08 01
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves
Norm
Issue date :
2005 10 01
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings (consolidated version)
Norm
Issue date :
2003 06 01
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
Norm
Issue date :
2003 09 01
Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2003)
Norm
Issue date :
2003 09 01
Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
Norm
Issue date :
2003 07 01
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
Norm
Issue date :
2004 01 01
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
Norm
Issue date :
2004 04 01
Pipework - Fittings for corrugated metal hoses (ISO 10806:2003)
Norm
Issue date :
2004 02 01
Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003)
Norm
Issue date :
2004 03 01
Valves for natural gas transportation in pipelines - Performance requirements and tests
Norm
Issue date :
2004 03 01
Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
Norm
Issue date :
2010 09 01
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004+Amd 1:2008)
Norm
Issue date :
2004 09 01
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
Norm
Issue date :
2006 03 01
Metallic industrial piping - Part 6: Additional requirements for buried piping (consolidated version)
Norm
Issue date :
2007 08 01
Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions
Norm
Issue date :
2004 10 01
Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004)
Norm
Issue date :
2005 01 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
Norm
Issue date :
2005 01 01
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
Norm
Issue date :
2005 02 01
Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
Norm
Issue date :
2005 02 01
Foam producing solutions for leak detection on gas installations
Norm
Issue date :
2005 06 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
Norm
Issue date :
2010 04 01
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
Norm
Issue date :
2007 10 01
Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2003, corrected version:2005, including Technical Corrigendum 1:2006)
Norm
Issue date :
2008 09 01
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
Norm
Issue date :
2009 06 01
Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements
Norm
Issue date :
2011 02 15
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
Norm
Issue date :
1997 02 27
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and alloyed steels with specified elevated temperature properties
Norm
Issue date :
2023 08 15
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing