Please select and order
€84.27
excl. VAT
Add to cart
Norm

ÖNORM EN 12799

Issue date: 2004 04 01

Brazing - Non-destructive examination of brazed joints (EN 12799:2000 + A1:2003)

This European Standard describes non-destructive examination procedures and test piece types necessary to perform the tests on brazed joints. The non-destructive examin...
Valid
Publisher:
Austrian Standards International
Format:
Digital | 30 Pages
Language:
German | English | Download GER/ENG
Optionally co-design standards:
This European Standard describes non-destructive examination procedures and test piece types necessary to perform the tests on brazed joints. The non-destructive examination methods described are as follows: a) visual examination (see clause 4); b) ultrasonic examination (see clause 5); c) radiographic examination (see clause 6); d) penetrant examination (see clause 7); e) leak testing (see clause 8); f) proof testing (see clause 9); g) thermography (see clause 10). The brazed joints to which these tests are applied can either be test samples manufactured to obtain brazed joint design data, or manufactured as part of the approval testing of a brazing procedure, or parts of a brazed assembly. The type of test piece described for each test can be quoted or incorporated in engineering application standards that deal with brazed assemblies. This European Standard does not recommend the number of samples to be tested or the repeat tests allowed. Neither does it specify methods of sampling brazed joints, except to give guidance regarding the precautions necessary, nor does it comment on the acceptance criteria applicable to any of the tests. No attempt is made to define which test or tests, if any , should be applied in any situation. This is a matter to be established before any particular method of test is selected. The methods of non-destructive examination are not associated with any particular type of brazed assembly but lay down the general principles of the types of testing described. It is emphasised that a satisfactory examination method can only be developed and used after taking into account all the relevant factors regarding the equipment to be used and the characteristics of the test piece being examined.
ÖNORM EN 12799
2004 04 01
Brazing - Non-destructive examination of brazed joints (EN 12799:2000 + A1:2003)
Norm
ÖNORM EN 12799
2000 10 01
Brazing - Non-destructive examination of brazed joints
Norm
Norm
ÖNORM EN 12668-1
Issue date : 2007 12 01
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments (consolidated version)
Norm
ÖNORM EN 12668-1
Issue date : 2008 10 01
Non-destructive testing - Characterization and verification of ultrasonic testing equipment - Part 1: Instruments
Norm
ÖNORM EN 12668-2
Issue date : 2007 12 01
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes (consolidated version)
Norm
ÖNORM EN 12668-2
Issue date : 2008 10 01
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
Norm
ÖNORM EN 12668-3
Issue date : 2007 12 01
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment (consolidated version)
Norm
ÖNORM EN 13184
Issue date : 2004 06 01
Non-destructive testing - Leak testing - Pressure change method (EN 13184:2001 + A1:2003)
Norm
ÖNORM EN 13185
Issue date : 2004 06 01
Non-destructive testing - Leak testing - Tracer gas method (EN 13185:2001 + A1:2003)
Norm
ÖNORM EN 1593
Issue date : 2004 06 01
Non-destructive testing - Leak testing - Bubble emission techniques (EN 1593:1999 + A1:2003)
Norm
ÖNORM EN 1779
Issue date : 2004 06 01
Non-destructive testing - Leak testing - Criteria for method and technique selection (EN 1779:1999 + A1:2003)
Norm
ÖNORM EN 444
Issue date : 1994 06 01
Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays
Norm
ÖNORM EN 473
Issue date : 2009 01 01
Non-destructive testing - Qualification and certification of NDT personnel - General principles
Norm
ÖNORM EN 571-1
Issue date : 1997 04 01
Non destructive testing - Penetrant testing - Part 1: General principles
Norm
ÖNORM EN 583-1
Issue date : 2004 06 01
Non-destructive testing - Ultrasonic examination - Part 1: General principles (EN 583-1:1998 + A1:2003)
Norm
ÖNORM EN 583-2
Issue date : 2001 07 01
Non-destructive testing - Ultrasonic examination - Part 2: Sensitivity and range setting
Norm
ÖNORM EN 583-3
Issue date : 1997 08 01
Non destructive testing - Ultrasonic examination - Part 3: Transmission technique