Please select and order
€120.67
excl. VAT
Add to cart
Norm

ÖNORM EN 10290

Issue date: 2004 07 01

Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings

This European Standard specifies the requirements of liquid applied external coating, polyurethane (PUR) and polyurethane-modified (PUR-MOD), for the corrosion protectio...
Valid
This European Standard specifies the requirements of liquid applied external coating, polyurethane (PUR) and polyurethane-modified (PUR-MOD), for the corrosion protection of tubes and pipeline fittings. The coating in this standard can be applied to longitudinally or spirally welded and to seamless steel tubes and fittings used for the construction of pipelines for conveying liquids or gases. In accordance with the elongation properties, if the component has to be cold bent the coating shall be applied after bending unless otherwise approved by the purchaser. The coating shall consist normally of one layer of liquid product, applied by brush or by an airless spray technique. Other application methods can be recommended by the product manufacturer, in accordance with the kind of product (spatula, injection, spreading, etc.). This coating can be used for the protection of buried or submerged steel tubes for service at the following temperatures and with two thickness classes A (1 000 mm) and B (1 500 mm) based on the following combination. Lower thickness can be agreed between the coating manufacturer and the purchaser. type 1 : - 20 °C to 40 °C, thickness class A or B type 2 : - 20 °C to 60 °C, thickness class B type 3 : - 20 °C to 80 °C, thickness class B Other temperatures can be agreed; in this case, tests shall be carried out at the required temperature. In this standard the word components is used for tubes and fittings. Frequencies of tests on fittings shall be agreed by the parties at the ordering stage. Components coated with these types of coatings may be further protected by means of cathodic protection.
ÖNORM EN 10290
2004 07 01
Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane a...
Norm
Norm
ÖNORM EN 10021
Issue date : 2007 04 01
General technical delivery conditions for steel products
Norm
ÖNORM EN ISO 2808
Issue date : 2007 05 01
Paints and varnishes - Determination of film thickness (ISO 2808:2007)
Norm
ÖNORM EN ISO 4624
Issue date : 2003 07 01
Paints and varnishes - Pull-off test for adhesion (ISO 4624:2002)
Norm
ÖNORM EN ISO 8501-1
Issue date : 2007 10 01
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007) (multilingual version)
Norm
ÖNORM EN ISO 868
Issue date : 2003 09 01
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)