Please select and order
€98.22
excl. VAT
Add to cart
Norm

ÖNORM EN 14506

Issue date: 2005 09 01

Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C

This document specifies: a) field of application; b) requirements for automatic diverters; c) dimensional and the physico-chemical properties and the properties of gen...
Valid
Publisher:
Austrian Standards International
Format:
Digital | 23 Pages
Language:
German | English | Download GER/ENG
Optionally co-design standards:
This document specifies: a) field of application; b) requirements for automatic diverters; c) dimensional and the physico-chemical properties and the properties of general hydraulic, mechanical and acoustic design of automatic diverters; d) test method and requirements for verifying these properties. For sanitary tapware (see Clause 2) with integrated devices, the automatic diverter is only considered to be a backflow protection device if it has passed the requirements of this document and additionally those of the applicable product standard for the draw off tap or mixing valve; e) marking and presentation; f) acoustics. This document specifies the characteristics of automatic diverters suitable for use in drinking water systems at pressures up to 1 MPa (10 bar) and temperatures up to 65 °C and for 1 h at 90 °C. They are intended only for installation with no downstream closing device. This document is applicable to the product type indicated as follows: i) integrated in spout (outlet); ii) integrated in the mixing body; iii) non-integrated (part of a set) above the maximum water level. This document is not applicable to the product type non-integrated below the maximum water level.
ÖNORM EN 14506
2005 09 01
Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C
Norm
Norm
ISO 7-1:1994
Issue date : 1994 05 12
Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ISO 9227:2006
Issue date : 2006 07 06
Corrosion tests in artificial atmospheres — Salt spray tests
Norm
ÖNORM EN 1111
Issue date : 1998 08 01
Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
Norm
ÖNORM EN 1112
Issue date : 2008 05 01
Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification
Norm
ÖNORM EN 1113
Issue date : 2008 05 01
Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification
Norm
ÖNORM EN 1286
Issue date : 1999 07 01
Sanitary tapware - Low pressure mechanical mixing valves - General technical specification
Norm
ÖNORM EN 1287
Issue date : 1999 07 01
Sanitary tapware - Low Pressure thermostatic mixing valves - General technical specifications
Norm
ÖNORM EN 1717
Issue date : 2008 04 01
Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow
Norm
ÖNORM EN 200
Issue date : 2008 12 01
Sanitary tapware - Single taps and combination taps (PN 10) - General technical specification
Norm
ÖNORM EN 248
Issue date : 2003 02 01
Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr
Norm
ÖNORM EN 806-1
Issue date : 2001 03 01
Specifications for installations inside buildings conveying water for human consumption - Part 1: General
Norm
ÖNORM EN 817
Issue date : 2008 12 01
Sanitary tapware - Mechanical mixers (PN 10) - General technical specifications
Norm
ÖNORM EN ISO 228-1
Issue date : 2003 06 01
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
Norm
ÖNORM EN ISO 3822-1
Issue date : 1999 07 01
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999)
Norm
ÖNORM EN ISO 3822-2
Issue date : 1995 10 01
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for .......(abbreviated)
Norm
ÖNORM EN ISO 6509
Issue date : 1995 07 01
Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981)
Norm
ISO 7-1:1994
Issue date : 1994 05 12
Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ISO 9227:2017
Issue date : 2017 03 17
Corrosion tests in artificial atmospheres — Salt spray tests