Please select and order
€229.44
excl. VAT
Add to cart
Norm

ÖNORM EN 14394

Issue date: 2006 04 01

Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C

This European Standard specifies the requirements and test methods for the construction, the safety and the rational energy usage for heating boilers (standard-heating a...
Withdrawn: 2009 02 15
§ Legal References
This European Standard specifies the requirements and test methods for the construction, the safety and the rational energy usage for heating boilers (standard-heating and low temperature boilers) fired by liquid fuels from steel and cast iron with burners according to the relevant burner standards (for atomising oil burners, see. EN 267) up to a nominal heat output of 10 MW. They are operated, either with negative pressure (natural draught boiler) or with positive pressure (pressurised boiler) in the combustion chamber, in accordance with the boiler manufacturer s instructions Boilers in accordance with this European Standard are designed for the heating of central heating installations in which the heat carrier is water, and the maximum allowable operating temperature of which is up to 110 °C and the maximum safety temperature limiter of 120 °C. The maximum allowable operating pressure is 10 bar. This standard does not apply to gas boilers with atmospheric burners, boilers for solid fuels, oil or gas fired condensation boilers, boilers with oil vaporisation burners. For these boilers there are further requirements. For gas-fired central heating boilers equipped with a forced draught burner of nominal heat out put not exceeding 1000 kW, see prEN 303-7. For shell boilers with a nominal heat output exceeding 10 MW and a maximum safety temperature limiter exceeding 120 °C, see EN 12953 series. NOTE Definitions for heating boiler and low temperature boiler see Council Directive 92/42/EEC.
ÖNORM EN 14394
2009 02 15
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10...
Norm
ÖNORM EN 14394
2006 04 01
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10...
Norm
ÖNORM EN 14394
2006 02 01
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10...
Norm
Norm
ISO 185:2005
Issue date : 2005 08 26
Grey cast irons — Classification
Norm
ISO 7005-1:1992
Issue date : 1992 04 09
Metallic flanges — Part 1: Steel flanges
Norm
ISO 7005-2:1988
Issue date : 1988 12 08
Metallic flanges — Part 2: Cast iron flanges
Norm
ISO 7005-3:1988
Issue date : 1988 02 18
Metallic flanges — Part 3: Copper alloy and composite flanges
Norm
ISO 857-1:1998
Issue date : 1998 12 20
Welding and allied processes — Vocabulary — Part 1: Metal welding processes
Norm
ÖNORM EN 10025-1
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 1: General technical delivery conditions
Norm
ÖNORM EN 10025-2
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Norm
ÖNORM EN 10025-3
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
Norm
ÖNORM EN 10088-1
Issue date : 2005 09 01
Stainless steels - Part 1: List of stainless steels
Norm
ÖNORM EN 10088-2
Issue date : 2005 09 01
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Norm
ÖNORM EN 10204
Issue date : 2005 01 01
Metallic products - Types of inspection documents
Norm
ÖNORM EN 10216-1
Issue date : 2004 07 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties (EN 10216-1:2002 + A1:2004)
Norm
ÖNORM EN 10216-3
Issue date : 2004 07 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (EN 10216-3:2002 + A1:2004)
Norm
ÖNORM EN 10216-4
Issue date : 2004 07 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties (EN 10216-4:2002 + A1:2004)
Norm
ÖNORM EN 10216-5
Issue date : 2005 01 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
Norm
ÖNORM EN 10217-1
Issue date : 2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties (consolidated version)
Norm
ÖNORM EN 10217-2
Issue date : 2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties (consolidated version)
Norm
ÖNORM EN 10217-3
Issue date : 2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (consolidated version)
Norm
ÖNORM EN 10217-4
Issue date : 2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties (consolidated version)
Norm
ÖNORM EN 10217-5
Issue date : 2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties (consolidated version)
Norm
ÖNORM EN 10217-6
Issue date : 2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties (consolidated version)
Norm
ÖNORM EN 10217-7
Issue date : 2005 06 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
Norm
ÖNORM EN 10226-1
Issue date : 2004 09 01
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
Norm
ÖNORM EN 10226-3
Issue date : 2005 05 01
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
Norm
ÖNORM EN 12828
Issue date : 2003 09 01
Heating systems in buildings - Design for water-based heating systems
Norm
ÖNORM EN 12953-8
Issue date : 2002 05 01
Shell boilers - Part 8: Requirements for safeguards against excessive pressure
Norm
ÖNORM EN 1561
Issue date : 1997 09 01
Founding - Grey cast irons
Norm
ÖNORM EN 1563
Issue date : 2007 12 01
Founding - Spheroidal graphite cast irons (consolidated version)
Norm
ÖNORM EN 22553
Issue date : 1994 10 01
Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992)
Norm
ÖNORM EN 267
Issue date : 1999 12 01
Forced draught oil burners - Definitions, requirements, testing, marking
Norm
ÖNORM EN 267
Issue date : 2006 02 01
Automatic forced draught burners for liquid fuels
Norm
ÖNORM EN 288-9
Issue date : 1999 06 01
Specification and approval of welding procedures for metallic materials - Part 9: Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines
Norm
ÖNORM EN 303-1
Issue date : 2004 03 01
Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking (EN 303-1:1999 + A1:2003)
Norm
ÖNORM EN 303-2
Issue date : 1999 03 01
Heating boilers - Part 2: Heating boilers with forced drought burners - Special requirements for boilers with atomizing oil burners
Norm
ÖNORM EN ISO 15607
Issue date : 2004 03 01
Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
Norm
ÖNORM EN ISO 15609-1
Issue date : 2005 01 01
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
Norm
ÖNORM EN ISO 15610
Issue date : 2004 02 01
Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003)
Norm
ÖNORM EN ISO 15611
Issue date : 2004 03 01
Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003)
Norm
ÖNORM EN ISO 15612
Issue date : 2004 10 01
Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004)
Norm
ÖNORM EN ISO 15613
Issue date : 2004 09 01
Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
Norm
ÖNORM EN ISO 15614-1
Issue date : 2005 02 01
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004)
Norm
ÖNORM EN ISO 15614-2
Issue date : 2005 07 01
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005)
Norm
ÖNORM EN ISO 228-1
Issue date : 2003 06 01
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
Norm
ÖNORM EN ISO 228-2
Issue date : 2003 06 01
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
Norm
ÖNORM EN ISO 4063
Issue date : 2000 07 01
Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:1998)
Norm
ÖNORM EN ISO 4063
Issue date : 2008 04 01
Welding and allied processes - Nomenclature of processes and reference numbers (ISO/DIS 4063:2008)
Norm
ÖNORM EN ISO 6506-1
Issue date : 2006 04 01
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2005)
Norm
ÖNORM EN ISO 9606-2
Issue date : 2005 04 01
Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
Norm
ISO 185:2020
Issue date : 2020 05 29
Grey cast irons — Classification
Norm
ISO 857-1:1998
Issue date : 1998 12 20
Welding and allied processes — Vocabulary — Part 1: Metal welding processes
Norm
ISO 7005-1:2011
Issue date : 2011 07 15
Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
Norm
ISO 7005-2:1988
Issue date : 1988 12 08
Metallic flanges — Part 2: Cast iron flanges
Norm
ISO 7005-3:1988
Issue date : 1988 02 18
Metallic flanges — Part 3: Copper alloy and composite flanges
Norm
ÖNORM EN 14394
Issue date : 2009 02 15
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C