Please select and order
€143.05
excl. VAT
Add to cart
Norm

ÖNORM EN 13852-2

Issue date: 2005 03 01

Cranes - Offshore cranes - Part 2: Floating cranes

This document specifies the safety requirements for floating cranes including their supporting pedestals or structures. This document applies to cranes manufactured aft...
Valid
§ Legal References
This document specifies the safety requirements for floating cranes including their supporting pedestals or structures. This document applies to cranes manufactured after the date of issue of this document. This document does not cover: a) fabrication, assembly, dismantling or changing the configuration of the crane; b) lifting accessories, i.e. any item between the hook and the load; c) design temperature below ¿20 °C; d) operations at an ambient temperature above 50 °C; e) cranes covered by the Machinery Directive. The significant hazards covered by this document are identified in clause 4. This document includes requirements for lifting of persons. The use of cranes for lifting of persons may be subject to specific national regulations. Where National Authorities permit the use of a floating crane for the lifting of persons, the crane would at least need to fulfil the requirements of this standard and be adopted in accordance with the relevant National regulations for the lifting of persons.
ÖNORM EN 13852-2
2005 03 01
Cranes - Offshore cranes - Part 2: Floating cranes
Norm
Norm
ISO 12478-1:1997
Issue date : 1997 07 24
Cranes — Maintenance manual — Part 1: General
Norm
ISO 12482-1:1995
Issue date : 1995 11 16
Cranes — Condition monitoring — Part 1: General
Norm
ISO 4308-1:2003
Issue date : 2003 05 09
Cranes and lifting appliances — Selection of wire ropes — Part 1: General (Corrected version 2003-05)
Norm
ISO 8566-1:1992
Issue date : 1992 06 18
Cranes — Cabins — Part 1: General
Draft
ISO/DIS 8566-1
Issue date : 2008 11 06
Cranes — Cabins and control stations — Part 1: General
Norm
ISO 9927-1:2009
Issue date : 2009 01 06
Cranes — Inspections — Part 1: General
Norm
ÖNORM EN 10025-1
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 1: General technical delivery conditions
Norm
ÖNORM EN 10025-2
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Norm
ÖNORM EN 10025-3
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
Norm
ÖNORM EN 10025-4
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
Norm
ÖNORM EN 10025-5
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
Norm
ÖNORM EN 10025-6
Issue date : 2005 02 01
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
Norm
ÖNORM EN 1005-3
Issue date : 2009 01 01
Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
Norm
ÖNORM EN 10083-1
Issue date : 2006 12 01
Steels for quenching and tempering - Part 1: General technical delivery conditions
Norm
ÖNORM EN 10083-2
Issue date : 2006 12 01
Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
Norm
ÖNORM EN 10083-3
Issue date : 2006 12 01
Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels
Norm
ÖNORM EN 10204
Issue date : 2005 01 01
Metallic products - Types of inspection documents
Norm
ÖNORM EN 1127-1
Issue date : 2008 03 01
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
Norm
ÖNORM EN 12077-2
Issue date : 2008 10 01
Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices
Norm
ÖNORM EN 12385-1
Issue date : 2009 03 01
Steel wire ropes - Safety - Part 1: General requirements
Norm
ÖNORM EN 12385-2
Issue date : 2008 09 01
Steel wire ropes - Safety - Part 2: Definitions, designation and classification
Norm
ÖNORM EN 12385-3
Issue date : 2008 09 01
Steel wire ropes - Safety - Part 3: Information for use and maintenance
Norm
ÖNORM EN 12644-1
Issue date : 2001 04 01
Cranes - Information for use and testing - Part 1: Instructions
Norm
ÖNORM EN 12644-2
Issue date : 2000 05 01
Cranes - Information for use and testing - Part 2: Marking
Norm
ÖNORM EN 13135-1
Issue date : 2006 09 01
Cranes - Safety - Design - Requirements for equipment - Part 1: Electrotechnical equipment (consolidated version)
Norm
ÖNORM EN 13135-2
Issue date : 2006 01 01
Cranes - Equipment - Part 2: Non-electrotechnical equipment (consolidated version)
Norm
ÖNORM EN 13411-4
Issue date : 2009 03 01
Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing
Norm
ÖNORM EN 13411-6
Issue date : 2009 03 01
Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
Norm
ÖNORM EN 13411-7
Issue date : 2009 03 01
Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket
Norm
ÖNORM EN 13463-1
Issue date : 2009 04 15
Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
Norm
ÖNORM EN 13586
Issue date : 2007 04 01
Cranes - Access (consolidated version)
Norm
ÖNORM EN 14502-1
Issue date : 2006 01 01
Cranes - Equipment for lifting persons - Part 1: Suspended baskets
Norm
ÖNORM EN 14502-1
Issue date : 2008 06 01
Cranes - Equipment for the lifting of persons - Part 1: Suspended baskets
Norm
ÖNORM EN 614-1
Issue date : 2006 07 01
Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
Norm
ÖNORM EN 842
Issue date : 2009 02 01
Safety of machinery - Visual danger signals - General requirements, design and testing
Norm
ÖNORM EN 894-3
Issue date : 2009 02 01
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
Norm
ÖNORM EN 982
Issue date : 1996 07 01
Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
Norm
ÖNORM EN 983
Issue date : 1996 07 01
Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
Norm
ÖNORM EN ISO 11688-1
Issue date : 1998 12 01
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
Norm
ÖNORM EN ISO 11688-1/AC1
Issue date : 1999 07 01
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) (Corrigendum)
Norm
ÖNORM EN ISO 11688-2
Issue date : 2001 03 01
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998)
Norm
ÖNORM EN ISO 12100-1
Issue date : 2004 03 01
Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO 12100-1:2003)
Norm
ÖNORM EN ISO 12100-2
Issue date : 2004 03 01
Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-2:2003)
Norm
ÖNORM EN ISO 14121-1
Issue date : 2008 01 01
Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007)
Norm
ÖNORM EN ISO 4871
Issue date : 1997 07 01
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
Norm
ÖNORM EN ISO 898-1
Issue date : 1999 12 01
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999)
Norm
ÖNORM EN ISO 898-1
Issue date : 2007 02 01
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO/DIS 898-1:2006)
Norm
ISO 4308-1:2003
Issue date : 2003 05 09
Cranes and lifting appliances — Selection of wire ropes — Part 1: General (Corrected version 2003-05)
Norm
ISO 8566-1:2010
Issue date : 2010 01 19
Cranes — Cabins and control stations — Part 1: General
Norm
ISO 9927-1:2013
Issue date : 2013 06 13
Cranes — Inspections — Part 1: General
Norm
ISO 12478-1:1997
Issue date : 1997 07 24
Cranes — Maintenance manual — Part 1: General
Norm
ISO 12480-1:1997
Issue date : 1997 03 06
Cranes — Safe use — Part 1: General
Norm
ISO 12482-1:1995
Issue date : 1995 11 16
Cranes — Condition monitoring — Part 1: General