Please select and order
€134.80
excl. VAT
Add to cart
Norm
ÖNORM EN 13445-6
Issue date: 2013 11 15
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron (consolidated version)
This European Standard specifies requirements for the design, materials, manufacturing and testing of pressure vessels and pressure vessel parts intended for use with a m...
Withdrawn: 2014 11 01
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 54 Pages
Language:
German
| English
Currently valid:
Optionally co-design standards:
ICS
This European Standard specifies requirements for the design, materials, manufacturing and testing of pressure vessels and pressure vessel parts intended for use with a maximum allowable pressure, PS, equal or less than 100 bar and shell wall thicknesses not exceeding 60 mm, which are constructed of ferritic or austenitic spheroidal graphite cast iron. The thickness limitation of the shell does not apply to thickness of flanges, reinforcements, bosses etc. The allowable grades do not include lamellar graphite cast iron grades for ferritic and austenitic grades, which are
explicitly excluded from this European Standard because of low elongation and brittle material behaviour, which requires the use of different safety factors and a different approach.
ÖNORM EN 13445-6
2021 12 15
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels a...
Norm
ÖNORM EN 13445-6
2017 01 01
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels a...
Norm
ÖNORM EN 13445-6
2014 11 01
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels a...
Norm
ÖNORM EN 13445-6
2013 11 15
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels a...
Norm
↖
ÖNORM EN 13445-6
2012 10 01
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels a...
Norm
ÖNORM EN 13445-6
2011 09 01
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels a...
Norm
ÖNORM EN 13445-6
2011 02 15
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels a...
Norm
ÖNORM EN 13445-6
2009 07 01
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels a...
Norm
ÖNORM EN 13445-6
2007 05 01
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels a...
Norm
ÖNORM EN 13445-6
2004 10 01
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels a...
Norm
ÖNORM EN 13445-6
2004 02 01
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels a...
Norm
ÖNORM EN 13445-6
2002 08 01
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels a...
Norm
ÖNORM M 7308
1992 07 01
Flat stayed or stiffened ends or plates of boilers or pressure vessels under internal or external pr...
Norm
ÖNORM M 7306
1992 07 01
Flat heads and covers of boilers or pressure vessels under internal or external pressure - Design an...
Norm
ÖNORM M 7304
1991 06 01
Cylindrical shells of boilers or pressure vessels under internal and external pressure - Design
Norm
ÖNORM M 7304
1990 07 01
Cylindrical shells of boilers or pressure vessels under internal and external pressure; design
Norm
ÖNORM M 7300
1990 06 01
Calculation of boilers and pressure vessels; design parameters, permissible stresses
Norm
ÖNORM M 7309
1988 09 01
Dished ends of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7311
1987 10 01
Round, square and elliptical tube sheets an tube bundle heat exchangers
Norm
ÖNORM M 7303
1984 04 01
Conical shells of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7308
1983 08 01
Flat stayed or stiffened ends or plates of boilers or pressure vessels under internal or external pr...
Norm
ÖNORM M 7306
1980 09 01
Flat heads and covers of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7303
1978 12 01
Conical shells of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7304
1978 10 01
Cylindrical shells of boilers or pressure vessels under external pressure; design
Norm
ÖNORM M 7301 Bbl 1
1977 11 01
Approximate calculation of reinforcement or openings in walls of boilers or pressure vessels
Norm
Norm
Issue date :
2001 11 01
Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing (Corrigendum)
Norm
Issue date :
1997 07 01
Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
Norm
Issue date :
1997 07 01
Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
Norm
Issue date :
2011 05 01
Founding - Technical conditions of delivery - Part 1: General
Norm
Issue date :
2012 02 01
Founding - Liquid penetrant inspection - Part 1: Sand, gravity die and low pressure die castings
Norm
Issue date :
2011 12 01
Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings
Norm
Issue date :
2012 03 15
Pressure equipment - Part 2: Quantities, symbols and units
Norm
Issue date :
2003 02 01
Pressure equipment - Part 5: Compliance and inspection documentation of materials
Norm
Issue date :
2012 02 01
Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings
Norm
Issue date :
2008 08 01
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007) (multilingual version: de/en/fr)
Norm
Issue date :
2009 09 01
Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007 + Cor 1:2009) (consolidated version)
Norm
Issue date :
2013 11 15
Unfired pressure vessels - Part 5: Inspection and testing (consolidated version)
Norm
Issue date :
2014 11 01
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
