Please select and order
€64.38
excl. VAT
Add to cart
Norm

ÖNORM EN 13445-1

Issue date: 2007 05 01

Unfired pressure vessels - Part 1: General (consolidated version)

This Part of this European Standard defines the terms, definitions, symbols and units that are used throughout the EN 13445. This Part of EN 13445 also gives guidelines...
Withdrawn: 2007 12 01
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 15 Pages
Language:
German | English
This Part of this European Standard defines the terms, definitions, symbols and units that are used throughout the EN 13445. This Part of EN 13445 also gives guidelines on the principles on which each part of the standard has been based. This information is aimed to aid the user of the EN 13445. This European Standard applies to unfired pressure vessels subject to a maximum allowable pressure greater than 0,5 bar gauge but may be used for vessels operating at lower pressures, including vacuum. This European Standard applies to maximum allowable temperatures for which creep effects need not be considered. The corresponding limits to calculation temperatures are given in Part 3 (see subclause 5.1). In EN13445-3:2002 two methods of Design by Analysis (DBA) are given in Annex B and Annex C respectively. Both of these are normative. NOTE The selection, application and installation of safety related accessories intended to protect pressure vessels during operation are covered in prEN 764-7. 1.2 Exclusions This European Standard is not applicable to pressure equipment of the following types: a) transportable pressure equipment; b) items specifically designed for nuclear use, the failure of which may cause a release of radioactivity; c) pressure equipment intended for the generation of steam or superheated water at temperatures higher than 110 °C; d) vessels of riveted construction; e) vessels of lamellar cast iron or any other materials not included in EN 13445-2 or EN 13445-6; f) multilayered, autofrettaged or pre-stressed vessels; g) pipelines and industrial piping.
ÖNORM EN 13445-1
2021 12 15
Unfired pressure vessels - Part 1: General
Norm
ÖNORM EN 13445-1
2017 01 01
Unfired pressure vessels - Part 1: General (EN 13445-1:2014-09, Issue 3:2016-07)
Norm
ÖNORM EN 13445-1
2015 05 15
Unfired pressure vessels - Part 1: General (consolidated version)
Norm
ÖNORM EN 13445-1
2014 11 01
Unfired pressure vessels - Part 1: General
Norm
ÖNORM EN 13445-1
2013 11 15
Unfired pressure vessels - Part 1: General (consolidated version)
Norm
ÖNORM EN 13445-1
2012 10 01
Unfired pressure vessels - Part 1: General
Norm
ÖNORM EN 13445-1
2011 09 01
Unfired pressure vessels - Part 1: General
Norm
ÖNORM EN 13445-1
2011 02 15
Unfired pressure vessels - Part 1: General
Norm
ÖNORM EN 13445-1
2009 07 01
Unfired pressure vessels - Part 1: General (consolidated version)
Norm
ÖNORM EN 13445-1
2007 12 01
Unfired pressure vessels - Part 1: General (consolidated version)
Norm
ÖNORM EN 13445-1
2007 05 01
Unfired pressure vessels - Part 1: General (consolidated version)
Norm
ÖNORM EN 13445-1
2004 10 01
Unfired pressure vessels - Part 1: General (consolidated version)
Norm
ÖNORM EN 13445-1
2004 02 01
Unfired pressure vessels - Part 1: General
Norm
ÖNORM EN 13445-1
2002 08 01
Unfired pressure vessels - Part 1: General
Norm
ÖNORM M 7306
1992 07 01
Flat heads and covers of boilers or pressure vessels under internal or external pressure - Design an...
Norm
ÖNORM M 7308
1992 07 01
Flat stayed or stiffened ends or plates of boilers or pressure vessels under internal or external pr...
Norm
ÖNORM M 7301
1992 02 01
Reinforcement of openings in walls of boilers or pressure vessels
Norm
ÖNORM M 7320
1992 01 01
Inspection openings in shells of boilers or pressure vessels
Norm
ÖNORM M 7304
1991 06 01
Cylindrical shells of boilers or pressure vessels under internal and external pressure - Design
Norm
ÖNORM M 7304
1990 07 01
Cylindrical shells of boilers or pressure vessels under internal and external pressure; design
Norm
ÖNORM M 7300
1990 06 01
Calculation of boilers and pressure vessels; design parameters, permissible stresses
Norm
ÖNORM M 7315
1989 07 01
Supports for horizontal pressure vessels; design
Norm
ÖNORM M 7309
1988 09 01
Dished ends of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7311
1987 10 01
Round, square and elliptical tube sheets an tube bundle heat exchangers
Norm
ÖNORM M 7305
1986 09 01
Cylindrical furnaces under external pressure; design, testing
Norm
ÖNORM M 7315
1984 05 01
Supports for horizontal pressure vessels; design
Norm
ÖNORM M 7303
1984 04 01
Conical shells of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7308
1983 08 01
Flat stayed or stiffened ends or plates of boilers or pressure vessels under internal or external pr...
Norm
ÖNORM M 7306
1980 09 01
Flat heads and covers of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7320
1979 06 01
Inspection openings in shells of boilers or pressure vessels
Norm
ÖNORM M 7305
1979 01 01
Cylindrical fireboxes under external pressure; design
Norm
ÖNORM M 7303
1978 12 01
Conical shells of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7304
1978 10 01
Cylindrical shells of boilers or pressure vessels under external pressure; design
Norm
ÖNORM M 7301 Bbl 1
1977 11 01
Approximate calculation of reinforcement or openings in walls of boilers or pressure vessels
Norm
ÖNORM M 7301
1977 10 01
Reinforcement of openings in walls of boilers or pressure vessels
Norm
ÖNORM M 7302
1976 03 01
Anchoring parts for boilers and pressure vessels
Norm
ÖNORM M 7301
1972 06 01
Reinforcement of openings in walls of boilers and pressure vessels
Norm
Expand
Norm
ÖNORM EN 764-1
Issue date : 2004 08 01
Pressure equipment - Terminology - Part 1: Pressure, temperature, volume, nominal size
Norm
ÖNORM EN 764-2
Issue date : 2002 09 01
Pressure equipment - Part 2: Quantities, symbols and units
Norm
ÖNORM EN 764-3
Issue date : 2002 09 01
Pressure equipment - Part 3: Definition of parties involved
Norm
ÖNORM EN 13445-1
Issue date : 2007 12 01
Unfired pressure vessels - Part 1: General (consolidated version)