Please select and order
€109.76
excl. VAT
Add to cart
Norm
ÖNORM EN 12201-3
Issue date: 2013 04 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings
This European Standard specifies the characteristics of fittings made from polyethylene (PE 100 and
PE 80) intended for the conveyance of water for human consumption, ra...
Withdrawn: 2023 07 15
Publisher:
Austrian Standards International
Format:
Digital | 41 Pages
Language:
German
| English
| Download GER/ENG
Currently valid:
Optionally co-design standards:
This European Standard specifies the characteristics of fittings made from polyethylene (PE 100 and
PE 80) intended for the conveyance of water for human consumption, raw water prior to treatment, drainage
and sewerage under pressure, vacuum sewer systems, and water for other purposes.
ÖNORM EN 12201-3
2024 08 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylen...
Norm
ÖNORM EN 12201-3
2023 07 15
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylen...
Norm
ÖNORM EN 12201-3
2013 04 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylen...
Norm
↖
ÖNORM EN 12201-3
2012 03 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylen...
Norm
ÖNORM EN 12201-3
2003 08 01
Plastics piping systems for water supply - Polyethylene (PE) - Part 3: Fittings
Norm
ÖNORM EN 13244-3
2003 08 01
Plastics piping systems for buried and above-ground pressure systems for water for general purposes,...
Norm
Norm
Issue date :
1997 12 25
Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
Norm
Issue date :
1997 12 25
Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies
Norm
Issue date :
2010 09 22
Plastics pipes and fittings — Decohesion test of polyethylene (PE) saddle fusion joints — Evaluation of ductility of fusion joint interface by tear test
Norm
Issue date :
2000 03 23
Plastics pipes and fittings — Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
Technische Regel
Issue date :
2007 01
Plastics piping systems - Guidance for coding of products and their intended uses
Norm
Issue date :
1997 02 13
Thermoplastics pipes for fluids under pressure — Mating dimensions of flange adapters and loose backing flanges
Norm
Issue date :
2008 06 10
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (Corrected version 2008-11)
Norm
Issue date :
2012 10 01
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
Norm
Issue date :
2007 03 16
Plastics pipes and fittings — Automatic recognition systems for electrofusion joints
Norm
Issue date :
2001 04 19
Plastics piping systems — Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading
Final Draft
Issue date :
2014 08 22
Plastics piping systems — Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
Norm
Issue date :
2001 10 25
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
Norm
Issue date :
1997 11 01
Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance of an assembled tapping tee
Norm
Issue date :
2012 03 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
Norm
Issue date :
2005 06 01
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
Norm
Issue date :
2012 03 15
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
Norm
Issue date :
2012 03 15
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
Norm
Issue date :
2006 07 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
Norm
Issue date :
2008 03 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components (ISO 1167-3:2007)
Norm
Issue date :
2008 03 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007)
Norm
Issue date :
2012 03 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
Norm
Issue date :
2013 11 15
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
Technische Regel
Issue date :
2007 01
Plastics piping systems - Guidance for coding of products and their intended uses
Norm
Issue date :
1978 09 01
Polyethylene (PE) pipes — Pressure drop in mechanical pipe-jointing systems — Method of test and requirements
Norm
Issue date :
1997 12 18
Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 1: Immersion test method
Norm
Issue date :
1997 12 18
Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 2: Polyolefin pipes
Norm
Issue date :
2019 07 12
Thermoplastics piping systems for fluids under pressure — Flange adapters and loose backing flanges — Mating dimensions
Norm
Issue date :
2018 03 09
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
Norm
Issue date :
2017 07 20
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 1: Butt fusion
Norm
Issue date :
2007 03 16
Plastics pipes and fittings — Automatic recognition systems for electrofusion joints
Norm
Issue date :
2015 03 02
Plastics piping systems — Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
Norm
Issue date :
2001 10 25
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
Norm
Issue date :
1997 12 25
Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
Norm
Issue date :
1997 12 25
Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies
Norm
Issue date :
2010 09 22
Plastics pipes and fittings — Decohesion test of polyethylene (PE) saddle fusion joints — Evaluation of ductility of fusion joint interface by tear test
Norm
Issue date :
2000 03 23
Plastics pipes and fittings — Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
Norm
Issue date :
2023 07 15
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings
