Please select and order
€324.16
excl. VAT
Add to cart
Norm
ÖNORM EN 1090-2
Issue date: 2012 01 01
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
This European Standard specifies requirements for execution of structural steelwork as structures or as
manufactured components, produced from: hot rolled, structural st...
Withdrawn: 2018 09 15
Publisher:
Austrian Standards International
Format:
Digital | 210 Pages
Language:
German
| English
| Download GER/ENG
Currently valid:
Optionally co-design standards:
ICS
This European Standard specifies requirements for execution of structural steelwork as structures or as
manufactured components, produced from: hot rolled, structural steel products up to and including grade S690; cold formed components and sheeting up to and including grades S700; hot finished and cold formed austenitic, austenitic-ferritic and ferritic stainless steel products; hot finished and cold formed structural hollow sections, including standard range and custom-made rolled
products and hollow sections manufactured by welding.
This European Standard may also be used for structural steel grades up to and including S960, provided that
conditions for execution are verified against reliability criteria and any necessary additional requirements are
specified.
This European Standard specifies requirements independent of the type and shape of the steel structure (e.g.
buildings, bridges, plated or latticed components) including structures subjected to fatigue or seismic actions.
The requirements are expressed in terms of execution classes
This European Standard applies to structures designed according to the relevant part of EN 1993.
This European Standard applies to structural components and sheeting as defined in EN 1993-1-3.
This European Standard applies to steel components in composite steel and concrete structures designed
according to the relevant part of EN 1994.
This European Standard may be used for structures designed according to other design rules provided that
conditions for execution comply with them and any necessary additional requirements are specified.
This European Standard does not cover requirements for watertightness or air permeability resistance of
sheeting.
ÖNORM EN 1090-2
2020 07 15
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel st...
Norm
ÖNORM EN 1090-2
2018 09 15
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel st...
Norm
ÖNORM EN 1090-2
2012 01 01
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel st...
Norm
↖
ÖNORM EN 1090-2
2009 07 01
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel st...
Norm
ÖNORM ENV 1090-5
2004 09 01
Execution of steel structures - Part 5: Supplementary rules for bridges (ENV 1090-5:1998 + AC1:2004)...
Vornorm
ÖNORM ENV 1090-1
2004 09 01
Execution of steel structures - Part 1: General rules and rules for buildings (ENV 1090-1:1996 + AC1...
Vornorm
ÖNORM ENV 1090-4
2004 09 01
Execution of steel structures - Part 4: Supplementary rules for hollow section structures (ENV 1090-...
Vornorm
ÖNORM ENV 1090-2
2004 09 01
Execution of steel structures - Part 2: Supplementary rules for cold formed thin gauge components an...
Vornorm
ÖNORM ENV 1090-6
2004 09 01
Execution of steel structures - Part 6: Supplementary rules for stainless steel (ENV 1090-6:2000 + A...
Vornorm
ÖNORM ENV 1090-3
2004 09 01
Execution of steel structures - Part 3: Supplementary rules for high yield strength steels (ENV 1090...
Vornorm
ÖNORM ENV 1090-6
2001 02 01
Execution of steel structures - Part 6: Supplementary rules for stainless steel
Vornorm
ÖNORM ENV 1090-5
1999 09 01
Execution of steel structures - Part 5: Supplementary rules for bridges
Vornorm
ÖNORM ENV 1090-2
1999 03 01
Execution of steel structures - Part 2: Supplementary rules for cold formed thin gauge components an...
Vornorm
ÖNORM ENV 1090-3
1998 07 01
Execution of steel structures - Part 3: Supplementary rules for high yield strength steels
Vornorm
ÖNORM ENV 1090-4
1998 07 01
Execution of steel structures - Part 4: Supplementary rules for hollow section structures
Vornorm
ÖNORM ENV 1090-1
1998 07 01
Execution of steel structures - Part 1: General rules and rules for buildings
Vornorm
ÖNORM B 4600-7
1965 06 01
Berechnung und Ausführung der Tragwerke; Stahlbau; Ausführung der Stahltragwerke
Norm
ÖNORM B 4300-2
1954 12 30
Berechnung und Ausführung der Tragwerke; Stahlbau; genietete und geschraubte Stahltragwerke
Norm
ÖNORM B 4300-3
1952 01 21
Berechnung und Ausführung der Tragwerke; Stahlbau; geschweißte Stahltragwerke
Norm
ÖNORM B 4300-2
1950 09 11
Berechnung und Ausführung der Tragwerke; Stahlbau; genietete und geschraubte Stahltragwerke
Norm
ÖNORM B 4300-2
1949 01 04
Berechnung und Ausführung der Tragwerke; Stahlbau; genietete und geschraubte Stahltragwerke
Norm
Norm
Issue date :
1989 11 02
Measurement methods for building — Setting-out and measurement — Part 1: Planning and organization, measuring procedures, acceptance criteria
Norm
Issue date :
1989 03 02
Tolerances for building — Methods of measurement of buildings and building products — Part 1: Methods and instruments
Norm
Issue date :
1989 02 16
Tolerances for building — Methods of measurement of buildings and building products — Part 2: Position of measuring points
Technische Regel
Issue date :
2006 04
Guidance for forming of structural steels in processing
Norm
Issue date :
2012 08 22
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
Norm
Issue date :
2005 06 27
Sampling procedures for inspection by attributes — Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
Norm
Issue date :
2011 01 01
Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
Norm
Issue date :
2005 03 01
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
Norm
Issue date :
2005 03 01
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections
Norm
Issue date :
2006 12 01
Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
Norm
Issue date :
2011 01 01
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
Norm
Issue date :
2006 10 01
Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
Norm
Issue date :
2005 03 01
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
Norm
Issue date :
2007 04 01
General technical delivery conditions for steel products
Norm
Issue date :
1993 12 01
Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions
Norm
Issue date :
1994 03 01
Structural steel I and H sections - Tolerances on shape and dimensions
Norm
Issue date :
2012 06 15
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012)
Norm
Issue date :
2006 09 01
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
Norm
Issue date :
2011 11 01
Cross-recessed pan head tapping screws (ISO 7049:2011)
Norm
Issue date :
1995 06 01
Hot rolled taper flange I sections - Tolerances on shape and dimensions
Norm
Issue date :
2005 09 01
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Norm
Issue date :
2005 09 01
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Norm
Issue date :
2012 05 15
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:2012)
Norm
Issue date :
2012 05 15
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012)
Norm
Issue date :
1996 02 01
Hot-rolled flat products made of high yield strength steels for cold forming - Part 1: General delivery conditions
Norm
Issue date :
1996 02 01
Hot-rolled flat products made of high yield strength steels for cold forming - Part 2: Delivery conditions for thermomechanically rolled steels
Norm
Issue date :
1996 02 01
Hot-rolled flat products made of high yield strength steels for cold forming - Part 3: Delivery conditions for normalized or normalized rolled steels
Norm
Issue date :
1996 01 01
Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions
Norm
Issue date :
2012 04 01
Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2012)
Norm
Issue date :
1996 08 01
Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
Norm
Issue date :
1996 10 01
Welding - Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:1996)
Norm
Issue date :
1996 10 01
Welding - General tolerances for welded constructions - Dimeensions for lengths and angles - Shape and position (ISO 13920:1996)
Norm
Issue date :
2006 12 01
Cold rolled narrow steel strip - Tolerances on dimensions and shape
Norm
Issue date :
1996 11 01
Hot rolled narrow steel strip - Tolerances on dimensions and shape
Norm
Issue date :
1997 04 01
Non destructive testing - Penetrant testing - Part 1: General principles
Norm
Issue date :
2011 04 15
Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2003)
Norm
Issue date :
2012 06 15
Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification (ISO 18275:2011)
Norm
Issue date :
2011 05 01
Founding - Technical conditions of delivery - Part 1: General
Norm
Issue date :
2012 03 15
Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2003 + Cor 1:2008 + Amd 1:2011)
Norm
Issue date :
2006 09 01
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
Norm
Issue date :
2006 09 01
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
Norm
Issue date :
2006 09 01
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
Norm
Issue date :
1998 01 01
Structural bearings - Part 11: Transport, storage and installation
Norm
Issue date :
1998 01 01
Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions
Norm
Issue date :
1998 03 01
Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
Norm
Issue date :
2010 02 15
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009)
Norm
Issue date :
2010 04 01
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009)
Norm
Issue date :
1999 11 01
Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998) (Corrigendum)
Norm
Issue date :
1998 12 01
Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998)
Norm
Issue date :
1998 11 01
Structural steel equal and unequal leg angles - Part 1: Dimensions
Norm
Issue date :
2007 02 01
Welding - Arc stud welding of metallic materials (ISO 14555:2006)
Norm
Issue date :
2008 11 01
Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2008)
Norm
Issue date :
2006 12 01
Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions
Norm
Issue date :
2009 08 01
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
Norm
Issue date :
1999 10 01
Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
Norm
Issue date :
2007 05 01
Paints and varnishes - Determination of film thickness (ISO 2808:2007)
Norm
Issue date :
2000 02 01
Hexagon washer head drilling screws with tapping screw thread (ISO 15480:1999)
Norm
Issue date :
2000 05 01
Hot rolled steel channels - Tolerances on shape, dimensions and mass
Norm
Issue date :
2000 05 01
Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
Norm
Issue date :
2000 12 01
Plain washers - Normal series - Product grade A (ISO 7089:2000)
Norm
Issue date :
2000 12 01
Plain washers - Extra large series - Product grade C (ISO 7094:2000)
Norm
Issue date :
2000 12 01
Plain washers, chamfered - Normal series - Product grade A (ISO 7090:2000)
Norm
Issue date :
2000 12 01
Plain washers - Small series - Product grade A (ISO 7092:2000)
Norm
Issue date :
2000 12 01
Plain washers - Large series - Part 1: Product grade A (ISO 7093-1:2000)
Norm
Issue date :
2000 12 01
Plain washers - Large series - Part 2: Product grade C (ISO 7093-2:2000)
Norm
Issue date :
2000 12 01
Plain washers - Normal series - Product grade C (ISO 7091:2000)
Norm
Issue date :
2000 09 01
Welding - Friction welding of metallic materials (ISO 15620:2000)
Norm
Issue date :
2004 05 01
Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels (EN 1011-3:2000 + A1:2003)
Norm
Issue date :
2004 08 01
Structural bearings - Part 7: Spherical and cylindrical PTFE bearings
Norm
Issue date :
2004 05 01
Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels (EN 1011-2:2001 + A1:2003)
Norm
Issue date :
2009 07 01
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings
Norm
Issue date :
2002 10 01
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)
Norm
Issue date :
2012 03 01
Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire
Norm
Issue date :
2004 04 01
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2002 + EN ISO 9013:2002/A1:2003)
Norm
Issue date :
2009 03 01
Steel wire ropes - Safety - Part 1: General requirements
Norm
Issue date :
2003 03 01
Closed end blind rivets with break pull mandrel and protruding head - St/St (ISO 15976:2002)
Norm
Issue date :
2003 04 01
Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002)
Norm
Issue date :
2003 03 01
Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002)
Norm
Issue date :
2012 03 01
Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wire for high duty applications
Norm
Issue date :
2003 04 01
Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002)
Norm
Issue date :
2003 04 01
Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002)
Norm
Issue date :
2003 12 01
Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
Norm
Issue date :
2003 10 01
Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003)
Norm
Issue date :
2004 04 01
Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
Norm
Issue date :
2004 04 01
Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
Norm
Issue date :
2004 04 01
Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
Norm
Issue date :
2004 04 01
Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions
Norm
Issue date :
2004 02 01
Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2003)
Norm
Issue date :
2004 05 01
Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2003)
Norm
Issue date :
2004 07 01
Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO 9018:2003)
Norm
Issue date :
2008 09 01
Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications
Norm
Issue date :
2004 03 01
Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003)
Norm
Issue date :
2011 01 15
Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO 14171:2010)
Norm
Issue date :
2007 08 01
Structural bearings - Part 4: Roller bearings (consolidated version)
Norm
Issue date :
2004 09 01
Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test (ISO 15613:2004)
Norm
Issue date :
2009 05 15
Fasteners - Hot dip galvanized coatings (ISO 10684:2004 + Cor 1:2008) (consolidated version)
Norm
Issue date :
2009 09 01
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2009)
Norm
Issue date :
2012 03 01
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2011, corrected version 2011-12-01)
Norm
Issue date :
2004 10 01
Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004)
Norm
Issue date :
2005 01 01
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
Norm
Issue date :
2005 01 01
Steel rod for drawing and/or cold rolling - Dimensions and tolerances
Norm
Issue date :
2005 02 01
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Norm
Issue date :
2005 02 01
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
Norm
Issue date :
2005 02 01
Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
Norm
Issue date :
2010 06 01
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
Norm
Issue date :
2005 02 01
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
Norm
Issue date :
2005 02 01
Hot rolled products of structural steels - Part 1: General technical delivery conditions
Norm
Issue date :
2005 03 01
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
Norm
Issue date :
2012 10 01
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012)
Norm
Issue date :
2005 07 01
High-strength structural bolting assemblies for preloading - Part 1: General requirements
Norm
Issue date :
2005 07 01
High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloading
Norm
Issue date :
2005 07 01
High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies
Norm
Issue date :
2005 07 01
High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers
Norm
Issue date :
2005 07 01
High-strength structural bolting assemblies for preloading - Part 5: Plain washers
Norm
Issue date :
2005 07 01
High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies
Norm
Issue date :
2005 05 01
Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005)
Norm
Issue date :
2005 09 01
Steel for the reinforcement of concrete - Weldable reinforcing steel - General
Norm
Issue date :
2012 03 01
Eurocode 3: Design of steel structures - Part 1-8: Design of joints (consolidated version)
Norm
Issue date :
2008 02 01
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel tubes (consolidated version)
Norm
Issue date :
2010 01 15
Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009)
Norm
Issue date :
2008 02 01
Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel tubes (consolidated version)
Norm
Issue date :
2011 02 15
Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2010)
Norm
Issue date :
2006 09 01
Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification (ISO 18276:2005)
Norm
Issue date :
2007 03 01
Welding coordination - Tasks and responsibilities (ISO 14731:2006)
Norm
Issue date :
2010 02 15
Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO 14343:2009)
Norm
Issue date :
2012 06 15
Eurocode 3 - Design of steel structures - Part 1-6: Strength and Stability of Shell Structures (consolidated version)
Norm
Issue date :
2012 08 01
Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012)
Norm
Issue date :
2007 06 01
Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions
Norm
Issue date :
2007 08 01
Non-preloaded structural bolting assemblies - Part 1: General requirements
Norm
Issue date :
2007 09 01
Resistance welding - Procedure for spot welding of uncoated and coated low carbon steels (ISO 14373:2006)
Norm
Issue date :
2007 09 01
Resistance welding - Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) (ISO 16432:2006)
Norm
Issue date :
2007 09 01
Resistance welding - Procedure for seam welding of uncoated and coated low carbon steels (ISO 16433:2006)
Norm
Issue date :
2007 09 01
Resistance welding - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2006)
Norm
Issue date :
2007 10 01
Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2003, corrected version:2005, including Technical Corrigendum 1:2006)
Norm
Issue date :
2007 12 01
Structural bearings - Part 8: Guide Bearings and Restraint Bearings
Norm
Issue date :
2008 03 01
High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
Norm
Issue date :
2008 03 01
High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
Norm
Issue date :
2008 06 01
Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008)
Norm
Issue date :
2008 07 01
Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2004)
Norm
Issue date :
2008 07 01
Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2004)
Norm
Issue date :
2011 03 01
Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2010)
Norm
Issue date :
2013 01 01
Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
Norm
Issue date :
2009 10 01
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel
Norm
Issue date :
2009 10 01
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
Norm
Issue date :
2009 04 01
Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
Norm
Issue date :
2009 06 01
High-strength structural bolting assemblies for preloading - Part 10: System HRC - Bolt and nut assemblies with calibrated preload
Norm
Issue date :
2009 05 01
Continuously hot-dip coated steel flat products - Technical delivery conditions
Norm
Issue date :
2009 05 15
High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies
Norm
Issue date :
2013 04 15
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
Norm
Issue date :
2011 06 01
Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) (multilingual version: de/en/fr)
Norm
Issue date :
2010 05 01
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2009)
Norm
Issue date :
2010 05 01
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2009)
Norm
Issue date :
2010 04 01
Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths (ISO 9445-1:2009)
Norm
Issue date :
2010 04 01
Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet (ISO 9445-2:2009)
Norm
Issue date :
2010 09 15
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
Norm
Issue date :
2012 05 01
Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
Norm
Issue date :
2011 07 01
Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing
Norm
Issue date :
2011 09 01
Qualification test of welders - Fusion welding - Part 1: Steels
Norm
Issue date :
2012 08 22
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
Norm
Issue date :
2005 06 27
Sampling procedures for inspection by attributes — Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
Technische Regel
Issue date :
2006 04
Guidance for forming of structural steels in processing
Norm
Issue date :
1989 11 02
Measurement methods for building — Setting-out and measurement — Part 1: Planning and organization, measuring procedures, acceptance criteria
Norm
Issue date :
1989 03 02
Tolerances for building — Methods of measurement of buildings and building products — Part 1: Methods and instruments
Norm
Issue date :
1989 02 16
Tolerances for building — Methods of measurement of buildings and building products — Part 2: Position of measuring points
Norm
Issue date :
2018 09 15
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
