Please select and order
€98.22
excl. VAT
Add to cart
Norm

ÖNORM B 5161

Issue date: 2017 05 01

Plastics piping systems for water supply and for drainage and sewerage with or without pressure - Pipes, joints and fittings made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Supplementary requirements to ÖNORM EN 1796 and ÖNORM EN 14364

This ÖNORM is applicable to industrially produced GRP piping systems that meet the basic requirements of ÖNORM EN 1796 and EN 14364. This ÖNORM cannot be used on GRP pipi...
Withdrawn: 2022 01 15
This ÖNORM is applicable to industrially produced GRP piping systems that meet the basic requirements of ÖNORM EN 1796 and EN 14364. This ÖNORM cannot be used on GRP piping systems that do not comply with ÖNORM EN 14364 and EN 1796. Piping systems according to this ÖNORM are preferably used for the transport of liquids and can, depending on the class of pipe, with an internal pressure greater than 1 PN be used as pressure pipes or with PN 1 as a sewage pipes. These pipes can be either buried in the ground with or without concrete coating or used as gravity pipelines.
ÖNORM B 5161
2022 01 15
Plastics piping systems for water supply and for drainage and sewerage with or without pressure - Pi...
Norm
ÖNORM B 5161
2017 05 01
Plastics piping systems for water supply and for drainage and sewerage with or without pressure - Pi...
Norm
ÖNORM B 5161
2014 09 01
Plastics piping systems for water supply and for drainage and sewerage with or without pressure - Pi...
Norm
ÖNORM B 5161
2007 04 01
Plastics piping systems for water supply and for drainage and sewerage with or without pressure - Pi...
Norm
Expand
Norm
ÖNORM B 5012
Issue date : 2015 11 01
Structural design of buried water and sewerage pipelines
Norm
ÖNORM B 5014-1
Issue date : 2016 08 15
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 1: Organic materials
Norm
ÖNORM B 5014-2
Issue date : 2017 01 01
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 2: Cementitous materials
Norm
ÖNORM B 5014-3
Issue date : 2017 05 01
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 3: Metalic materials
Norm
ÖNORM EN 59
Issue date : 2016 05 15
Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
Norm
ÖNORM EN 681-1
Issue date : 2007 07 01
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
Norm
ÖNORM EN 1295-1
Issue date : 2019 08 01
Structural design of buried pipelines under various conditions of loading - Part 1: General requirements
Norm
ÖNORM EN 1796
Issue date : 2013 04 15
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
Norm
ÖNORM EN 10204
Issue date : 2005 01 01
Metallic products - Types of inspection documents
Norm
ÖNORM EN 13121-3
Issue date : 2016 08 15
GRP tanks and vessels for use above ground - Part 3: Design and workmanship
Norm
ÖNORM EN 13501-1
Issue date : 2020 01 15
Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
Norm
ÖNORM EN 13823
Issue date : 2023 04 01
Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
Norm
ÖNORM EN 14364
Issue date : 2013 04 15
Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints
Norm
ÖNORM EN ISO 75-1
Issue date : 2020 05 15
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2020)
Norm
ÖNORM EN ISO 75-2
Issue date : 2013 07 15
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
Norm
ÖNORM EN ISO 178
Issue date : 2019 08 01
Plastics - Determination of flexural properties (ISO 178:2019)
Norm
ÖNORM EN ISO 527-1
Issue date : 2019 12 01
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2019)
Norm
ÖNORM EN ISO 527-2
Issue date : 2012 05 15
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
Norm
ÖNORM EN ISO 787-2
Issue date : 2021 11 01
General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 °C (ISO 787-2:2021)
Norm
ÖNORM EN ISO 2555
Issue date : 2018 10 15
Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method (ISO 2555:2018)
Norm
ÖNORM EN ISO 3344
Issue date : 1997 09 01
Reinforcement products - Determination of moisture content (ISO 3344:1997)
Norm
ÖNORM ISO 1887
Issue date : 2016 10 01
Textile glass - Determination of combustible-matter content (ISO 1887:2014)
Norm
ÖNORM ISO 3374
Issue date : 2014 09 01
Reinforcement products - Mats and fabrics - Determination of mass per unit area (ISO 3374:2000)
Norm
ÖNORM ISO 3375
Issue date : 2014 09 01
Textile glass - Determination of stiffness of rovings (ISO 3375:2009)
Norm
ÖNORM ISO 7685
Issue date : 2019 09 01
Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial ring stiffness (ISO 7685:2019)
Norm
ÖNORM ISO 8521
Issue date : 2020 08 15
Glass-reinforced thermosetting plastic (GRP) pipes - Test methods for the determination of the initial circumferential tensile wall strength
Norm
ÖNORM ISO 18851
Issue date : 2015 06 15
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test method to prove the structural design of fittings (ISO 18851:2015)
Technische Regel
ONR CEN/TS 14632
Issue date : 2012 08 01
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity (CEN/TS 14632:2012)
Technische Regel
ONR CEN/TS 14807
Issue date : 2014 03 15
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines (CEN/TS 14807:2013)
Technische Regel
CEN/TR 1295-2
Issue date : 2005 08
Structural design of buried pipelines under various conditions of loading - Part 2: Summary of nationally established methods of design
Technische Regel
CEN/TR 1295-3
Issue date : 2007 07
Structural design of buried pipelines under various conditions of loading - Part 3: Common method
Technische Regel
DVS 2220
Issue date : 2011 05
Qualification testing of plastics laminators and adhesive bonders - Laminates as well as laminate and adhesivebonded joints between GFRPs (UP-GF and EP-GF)
Norm
ÖNORM B 5161
Issue date : 2022 01 15
Plastics piping systems for water supply and for drainage and sewerage with or without pressure - Pipes, joints and fittings made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Supplementary requirements to ÖNORM EN ISO 23856