Please select and order
€120.67
excl. VAT
Add to cart
Norm
ÖNORM B 5161
Issue date: 2014 09 01
Plastics piping systems for water supply and for drainage and sewerage with or without pressure - Pipes, joints and fittings made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Supplementary requirements to ÖNORM EN 1796 and ÖNORM EN 14364
This ÖNORM is applicable to industrially produced GRP piping systems that meet the basic requirements of ÖNORM EN 1796 and EN 14364. This ÖNORM cannot be used on GRP pipi...
Withdrawn: 2017 05 01
Publisher:
Austrian Standards International
Format:
Digital | 22 Pages
Language:
German
Currently valid:
Optionally co-design standards:
Topics
This ÖNORM is applicable to industrially produced GRP piping systems that meet the basic requirements of ÖNORM EN 1796 and EN 14364. This ÖNORM cannot be used on GRP piping systems that do not comply with ÖNORM EN 14364 and EN 1796. Piping systems according to this ÖNORM are preferably used for the transport of liquids and can, depending on the class of pipe, with an internal pressure greater than 1 PN be used as pressure pipes or with PN 1 as a sewage pipes. These pipes can be either buried in the ground with or without concrete coating or used as gravity pipelines. This ÖNORM also is the basis for attestation of conformity of products which meet both the requirements of ÖNORM EN 1796 or ÖNORM EN 14364 as well as those of the present ÖNORM.
ÖNORM B 5161
2022 01 15
Plastics piping systems for water supply and for drainage and sewerage with or without pressure - Pi...
Norm
ÖNORM B 5161
2017 05 01
Plastics piping systems for water supply and for drainage and sewerage with or without pressure - Pi...
Norm
ÖNORM B 5161
2014 09 01
Plastics piping systems for water supply and for drainage and sewerage with or without pressure - Pi...
Norm
↖
ÖNORM B 5161
2007 04 01
Plastics piping systems for water supply and for drainage and sewerage with or without pressure - Pi...
Norm
Norm
Issue date :
2012 08 01
Drain and sewer systems - Design, construction, testing, operation - Complementary provisions concering ÖNORM EN 476, EN 752 and EN 1610
Norm
Issue date :
2002 11 01
Long-distance, district and supply pipelines of water supply systems - Additional specifications concerning ÖNORM EN 805
Norm
Issue date :
2012 06 15
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 1: Organic materials
Norm
Issue date :
2012 06 15
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 2: Cementitous materials
Norm
Issue date :
2012 06 15
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 3: Metalic materials
Norm
Issue date :
1978 05 01
Glass reinforced plastics; measurement of hardness by means of a barcol-impressor
Norm
Issue date :
2015 03 15
Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
Norm
Issue date :
2007 07 01
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
Norm
Issue date :
2000 08 01
Water supply - Requirements for systems and components outside buildings
Norm
Issue date :
1998 03 01
Structural design of buried pipelines under various conditions of loading - Part 1: General requirements
Norm
Issue date :
2013 04 15
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
Norm
Issue date :
2012 10 01
GRP tanks and vessels for use above ground - Part 3: Design and workmanship
Norm
Issue date :
2014 08 01
GRP tanks and vessels for use above ground - Part 3: Design and workmanship
Norm
Issue date :
2009 12 01
Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
Norm
Issue date :
2015 01 15
Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
Norm
Issue date :
2013 04 15
Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints
Norm
Issue date :
2013 07 15
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013)
Norm
Issue date :
2013 07 15
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
Norm
Issue date :
2013 09 15
Plastics - Determination of flexural properties (ISO 178:2010+Amd 1:2013) (consolidated version)
Norm
Issue date :
2012 05 15
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
Norm
Issue date :
2012 05 15
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
Norm
Issue date :
1995 07 01
General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 °C (ISO 787-2:1981)
Norm
Issue date :
1999 12 01
Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield Test method (ISO 2555:1989)
Norm
Issue date :
1997 09 01
Reinforcement products - Determination of moisture content (ISO 3344:1997)
Norm
Issue date :
2014 09 01
Textile glass - Determination of combustible-matter content (ISO 1887:1995)
Norm
Issue date :
2015 06 15
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test method to prove the structural design of fittings (ISO 18851:2015)
Technische Regel
Issue date :
2005 08
Structural design of buried pipelines under various conditions of loading - Part 2: Summary of nationally established methods of design
Technische Regel
Issue date :
2007 07
Structural design of buried pipelines under various conditions of loading - Part 3: Common method
Technische Regel
Issue date :
2014 03 15
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines (CEN/TS 14807:2013)
Norm
Issue date :
2014 09 01
Reinforcement products - Mats and fabrics - Determination of mass per unit area (ISO 3374:2000)
Norm
Issue date :
2014 09 01
Textile glass - Determination of stiffness of rovings (ISO 3375:2009)
Norm
Issue date :
2014 09 01
Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness
Norm
Issue date :
2014 09 01
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test methods for the determination of the apparent initial circumferential tensile strength (ISO 8521:2009)
Norm
Issue date :
2014 06 01
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness and resistance to initial ring deflection using segment test pieces cut from a pipe
Technische Regel
Issue date :
2012 08 01
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity (CEN/TS 14632:2012)
Norm
Issue date :
2017 11 01
Drain and sewer systems - Design, construction, testing, operation - Complementary provisions concering ÖNORM EN 476, ÖNORM EN 752 and ÖNORM EN 1610
Norm
Issue date :
2018 02 01
Water supply - Requirements for systems and components outside buildings - Additional specifications concerning ÖNORM EN 805
Norm
Issue date :
2016 08 15
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 1: Organic materials
Norm
Issue date :
2017 01 01
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 2: Cementitous materials
Norm
Issue date :
2017 05 01
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 3: Metalic materials
Norm
Issue date :
2016 05 15
Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
Norm
Issue date :
2007 07 01
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
Norm
Issue date :
2000 08 01
Water supply - Requirements for systems and components outside buildings
Norm
Issue date :
2019 08 01
Structural design of buried pipelines under various conditions of loading - Part 1: General requirements
Norm
Issue date :
2013 04 15
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
Norm
Issue date :
2016 08 15
GRP tanks and vessels for use above ground - Part 3: Design and workmanship
Norm
Issue date :
2020 01 15
Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
Norm
Issue date :
2023 04 01
Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
Norm
Issue date :
2013 04 15
Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints
Norm
Issue date :
2020 05 15
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2020)
Norm
Issue date :
2013 07 15
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
Norm
Issue date :
2019 08 01
Plastics - Determination of flexural properties (ISO 178:2019)
Norm
Issue date :
2019 12 01
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2019)
Norm
Issue date :
2012 05 15
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
Norm
Issue date :
2021 11 01
General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 °C (ISO 787-2:2021)
Norm
Issue date :
2018 10 15
Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method (ISO 2555:2018)
Norm
Issue date :
1997 09 01
Reinforcement products - Determination of moisture content (ISO 3344:1997)
Norm
Issue date :
2016 10 01
Textile glass - Determination of combustible-matter content (ISO 1887:2014)
Norm
Issue date :
2014 09 01
Reinforcement products - Mats and fabrics - Determination of mass per unit area (ISO 3374:2000)
Norm
Issue date :
2014 09 01
Textile glass - Determination of stiffness of rovings (ISO 3375:2009)
Norm
Issue date :
2019 09 01
Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial ring stiffness (ISO 7685:2019)
Norm
Issue date :
2020 08 15
Glass-reinforced thermosetting plastic (GRP) pipes - Test methods for the determination of the initial circumferential tensile wall strength
Norm
Issue date :
2015 06 15
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test method to prove the structural design of fittings (ISO 18851:2015)
Technische Regel
Issue date :
2012 08 01
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity (CEN/TS 14632:2012)
Technische Regel
Issue date :
2014 03 15
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines (CEN/TS 14807:2013)
Technische Regel
Issue date :
2005 08
Structural design of buried pipelines under various conditions of loading - Part 2: Summary of nationally established methods of design
Technische Regel
Issue date :
2007 07
Structural design of buried pipelines under various conditions of loading - Part 3: Common method
Technische Regel
Issue date :
2011 05
Qualification testing of plastics laminators and adhesive bonders - Laminates as well as laminate and adhesivebonded joints between GFRPs (UP-GF and EP-GF)
Norm
Issue date :
2017 05 01
Plastics piping systems for water supply and for drainage and sewerage with or without pressure - Pipes, joints and fittings made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Supplementary requirements to ÖNORM EN 1796 and ÖNORM EN 14364
