Please select and order
€143.05
excl. VAT
Add to cart
Norm
ÖNORM EN 1796
Issue date: 2013 04 15
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
This European Standard specifies the required properties of the piping system and its components made from glass-reinforced thermosetting plastics (GRP) based on unsatura...
Withdrawn: 2022 01 15
Publisher:
Austrian Standards International
Format:
Digital | 65 Pages
Language:
German
| English
Currently valid:
Optionally co-design standards:
This European Standard specifies the required properties of the piping system and its components made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) intended to be used for water supply (drinking or raw) with or without pressure. In a pipework system, pipes and fittings of different nominal pressure and stiffness ratings may be used together.
ÖNORM EN ISO 23856
2022 01 15
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-rei...
Norm
ÖNORM EN 1796
2013 04 15
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting p...
Norm
↖
ÖNORM EN 1796
2009 09 15
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting p...
Norm
ÖNORM EN 1796
2009 04 01
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting p...
Norm
ÖNORM EN 1796
2006 08 01
Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting p...
Norm
ÖNORM B 5162
2002 11 01
Glass fibre reinforced plastic pipes - Wound pipes, joints and fittings made of GF-UP - Dimensions, ...
Norm
ÖNORM B 5161/AC1
2002 02 01
Glass fibre reinforced plastic pipes - Centrifugally cast pipes, joints and fittings made of GF-UP -...
Norm
ÖNORM B 5161
2001 11 01
Glass fibre reinforced plastic pipes - Centrifugally cast pipes, joints and fittings made of GF-UP -...
Norm
ÖNORM B 5161
1983 10 01
Glass fibre reinforced plastic pipes; GF-UP-centrifugally cast pipes, joints and fittings; dimension...
Norm
Norm
Issue date :
2003 11 21
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
Norm
Issue date :
2009 09 09
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use
Norm
Issue date :
1997 04 03
Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
Norm
Issue date :
2009 12 08
Ductile iron pipes, fittings, accessories and their joints for water applications
Norm
Issue date :
1991 02 21
Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length
Norm
Issue date :
2002 07 11
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
Norm
Issue date :
1998 07 16
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial specific ring stiffness
Norm
Issue date :
2003 11 21
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of bolted flange joints
Norm
Issue date :
2014 04 29
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the apparent initial longitudinal tensile strength
Norm
Issue date :
2009 08 06
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the apparent initial circumferential tensile strength
Norm
Issue date :
2003 11 21
Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Test methods to prove the design of cemented or wrapped joints
Technische Regel
Issue date :
2007 08 29
Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) — Part 3: Installation parameters and application limits
Norm
Issue date :
1997 11 06
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test method to prove the resistance to initial ring deflection
Norm
Issue date :
2003 11 21
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor
Norm
Issue date :
2009 06 01
Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements
Norm
Issue date :
2009 12 15
Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009)
Norm
Issue date :
1997 09 01
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997)
Norm
Issue date :
2005 06 01
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
Norm
Issue date :
2011 06 01
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
Norm
Issue date :
2010 10 15
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings (ISO 1452-3:2009)
Norm
Issue date :
2013 07 15
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
Norm
Issue date :
2009 12 08
Ductile iron pipes, fittings, accessories and their joints for water applications
Norm
Issue date :
1991 02 21
Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length
Norm
Issue date :
2021 04 30
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
Norm
Issue date :
2019 07 11
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial ring stiffness
Norm
Issue date :
2019 08 02
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of bolted flange joints
Norm
Issue date :
2016 01 26
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the initial longitudinal tensile strength
Norm
Issue date :
2020 07 09
Glass-reinforced thermosetting plastic (GRP) pipes — Test methods for the determination of the initial circumferential tensile wall strength
Norm
Issue date :
2019 08 02
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of cemented or wrapped joints
Technische Regel
Issue date :
2007 08 29
Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) — Part 3: Installation parameters and application limits
Norm
Issue date :
2021 04 12
Glass-reinforced thermosetting plastics (GRP) pipes — Test method to prove the resistance to initial ring deflection
Norm
Issue date :
2018 05 03
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions
Norm
Issue date :
2018 05 17
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
Norm
Issue date :
2016 12 14
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Methods for regression analysis and their use
Norm
Issue date :
2018 01 08
Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
Norm
Issue date :
2022 01 15
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021)
