Please select and order
€98.22
excl. VAT
Add to cart
Norm

ÖNORM EN ISO 8256

Issue date: 2005 06 01

Plastics - Determination of tensile-impact strength (ISO 8256:2004)

1.1 This International Standard specifies two methods (method A and method B) for the determination of the tensile-impact strength of plastics under defined conditions. ...
Withdrawn: 2024 03 01
Publisher:
Austrian Standards International
Format:
Digital | 21 Pages
Language:
German | English | Download GER/ENG
Optionally co-design standards:
1.1 This International Standard specifies two methods (method A and method B) for the determination of the tensile-impact strength of plastics under defined conditions. The tests can be described as tensile tests at relatively high strain rates. These methods can be used for rigid materials (as defined in ISO 472), but are especially useful for materials too flexible or too thin to be tested with impact tests conforming to ISO 179 or ISO 180. 1.2 These methods are used for investigating the behaviour of specified specimens under specified impact velocities, and for estimating the brittleness or the toughness of specimens within the limitations inherent in the test conditions. 1.3 These methods are applicable both to specimens prepared from moulding materials and to specimens taken from finished or semi-finished products (for example mouldings, laminates, or extruded or cast sheets). 1.4 Results obtained by testing moulded specimens of different dimensions may not necessarily be the same. Equally, specimens cut from moulded products may not give the same results as specimens of the same dimensions moulded directly from the material. Test results obtained from specimens prepared from moulding compounds cannot be applied directly to mouldings of any given shape, because values may depend on the design of the moulding and the moulding conditions. Results obtained by method A and method B may or may not be comparable. 1.5 These methods are not suitable for use as a source of data for design calculations on components. Information on the typical behaviour of a material can be obtained, however, by testing different types of test specimen prepared under different conditions, and by testing at different temperatures. The two different methods are suitable for production control as well as for quality control.
ÖNORM EN ISO 8256
2024 03 01
Plastics - Determination of tensile-impact strength (ISO 8256:2023)
Norm
ÖNORM EN ISO 8256
2005 06 01
Plastics - Determination of tensile-impact strength (ISO 8256:2004)
Norm
ÖNORM EN ISO 8256
1997 03 01
Plastics - Determination of tensile-impact strength (ISO 8256:1990, including Technical Corrigendum ...
Norm
Norm
ISO 10350-1:2007
Issue date : 2007 07 09
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
Norm
ISO 11403-3:1999
Issue date : 1999 04 01
Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties
Norm
ISO 13802:1999
Issue date : 1999 10 21
Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
Norm
ISO 179-1:2000
Issue date : 2000 12 07
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
Draft
ISO/DIS 179-1
Issue date : 2008 10 23
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
Norm
ISO 179-2:1997
Issue date : 1997 12 18
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
Norm
ISO 180:2000
Issue date : 2000 12 14
Plastics — Determination of Izod impact strength
Norm
ISO 2602:1980
Issue date : 1980 02 01
Statistical interpretation of test results — Estimation of the mean — Confidence interval
Norm
ISO 2818:1994
Issue date : 1994 08 18
Plastics — Preparation of test specimens by machining
Norm
ISO 291:2008
Issue date : 2008 04 22
Plastics — Standard atmospheres for conditioning and testing
Norm
ISO 293:2004
Issue date : 2004 05 11
Plastics — Compression moulding of test specimens of thermoplastic materials
Norm
ISO 294-1:1996
Issue date : 1996 12 26
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
Norm
ISO 294-2:1996
Issue date : 1996 12 26
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars
Norm
ISO 294-3:2002
Issue date : 2002 06 13
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates
Norm
ISO 295:2004
Issue date : 2004 01 14
Plastics — Compression moulding of test specimens of thermosetting materials
Norm
ISO 3167:2002
Issue date : 2002 03 07
Plastics — Multipurpose test specimens
Norm
ISO 472:1999
Issue date : 1999 11 25
Plastics — Vocabulary
Draft
ISO/DIS 472
Issue date : 2006 03 28
Plastics — Vocabulary
Norm
ISO 179-1:2010
Issue date : 2010 06 04
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
Norm
ISO 179-2:2020
Issue date : 2020 05 14
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
Norm
ISO 180:2019
Issue date : 2019 11 29
Plastics — Determination of Izod impact strength
Norm
ISO 291:2008
Issue date : 2008 04 22
Plastics — Standard atmospheres for conditioning and testing
Norm
ISO 293:2004
Issue date : 2004 05 11
Plastics — Compression moulding of test specimens of thermoplastic materials
Norm
ISO 294-1:2017
Issue date : 2017 05 10
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
Norm
ISO 294-2:2018
Issue date : 2018 12 07
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 2: Small tensile bars
Norm
ISO 294-3:2020
Issue date : 2020 06 26
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates
Norm
ISO 295:2004
Issue date : 2004 01 14
Plastics — Compression moulding of test specimens of thermosetting materials
Norm
ISO 472:2013
Issue date : 2013 01 30
Plastics — Vocabulary
Norm
ISO 2602:1980
Issue date : 1980 02 01
Statistical interpretation of test results — Estimation of the mean — Confidence interval
Norm
ISO 2818:2018
Issue date : 2018 12 13
Plastics — Preparation of test specimens by machining
Norm
ISO 3167:2014
Issue date : 2014 07 30
Plastics — Multipurpose test specimens
Norm
ISO 10350-1:2017
Issue date : 2017 10 11
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
Norm
ISO 11403-3:2021
Issue date : 2021 06 18
Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties
Norm
ISO 13802:2015
Issue date : 2015 06 02
Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing (Corrected version 2016-03)
Norm
ÖNORM EN ISO 8256
Issue date : 2024 03 01
Plastics - Determination of tensile-impact strength (ISO 8256:2023)
Norm
ISO 8256:2004
Issue date : 2004 07 02
Plastics — Determination of tensile-impact strength