ÖNORM EN ISO 182-4

1.1 This part of ISO 182 specifies a method for the determination of the thermal stability at elevated temperature of compounds and products based on Vinyl chloride homopolymers and copolymers (in the following text abbreviated as PVC) which undergo dehydrochlorination (the evolution of hydrogen chloride). 1.2 The method may be used as a quality control test during manufacture and conversion of PVC compounds. lt may also be used for the characterization of PVC compounds and products, especially with regard to the effectiveness of their heat-stabilizing systems. lt is suitable for coloured PVC compounds and products for which a discolouration test under the action of heat may be unsatisfactory. 1.3 The method is recommended for compounded PVC materials and products only, although it tan be used for polymers in powder form under appropriate conditions to be agreed upon between the interested Parties. The method is not recommended for PVC compounds in the form of dry blends, since such materials may not be sufficiently homogeneous. 1.4 PVC compounds and products may evolve other decomposition products in addition to hydrogen chloride at elevated temperatures. A limited number of these products, originating from the decomposition of certain comonomers (such as Vinyl esters of organic acids) or of plasticizers, stabilizers and other additives, may effect the pH or the conductivity of an aqueous Solution when they are absorbed. Consequently, the results obtained for different products by the methods described in Parts 2 and 3 of ISO 182 may not be comparable with those obtained using the method described in the present part of ISO 182. 1.5 This part of ISO 182 specifies a potentiometric method for the determination of chloride ion (Cl-) concentration (expressed as pCI) in an absorbing solution, independent of the presence of other ions. The value pCl is defined as - Ig ccI, where ccI is (...abbreviated)