Please select and order
€64.38
excl. VAT
Add to cart
Norm
ÖNORM EN ISO 10350-1
Issue date: 2010 03 01
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2007)
ISO 10350 identifies specific test procedures for the acquisition and presentation of comparable data for certain basic properties of plastics. In general, each property ...
Withdrawn: 2014 11 01
Publisher:
Austrian Standards International
Format:
Digital | 16 Pages
Language:
German
| English
| Download GER/ENG
Currently valid:
Optionally co-design standards:
ICS
ISO 10350 identifies specific test procedures for the acquisition and presentation of comparable data for certain basic properties of plastics. In general, each property is specified by a single experimental value, although in certain cases properties are represented by two values obtained under different test conditions. The properties included are those presented conventionally in manufacturers´data sheets. This part of ISO 10350 applies predominantly to unreinforced and reinforced thermoplastic and thermosetting materials that may be injection- or compression-moulded or prepared as sheets of specified thickness. Part 2 of ISO 10350 deals specifically with long- or continuous-fibre-reinforced plastics. For the purposes of ISO 10350, long-fibre-reinforced plastics are considered to have fibre lengths greater than 7,5 mm prior to moulding.
ÖNORM EN ISO 10350-1
2018 03 15
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials...
Norm
ÖNORM EN ISO 10350-1
2014 11 01
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials...
Norm
ÖNORM EN ISO 10350-1
2010 03 01
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials...
Norm
↖
ÖNORM EN ISO 10350-1
2009 11 01
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials...
Norm
ÖNORM EN ISO 10350-1
2001 02 01
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials...
Norm
Norm
Issue date :
2013 04 09
Plastics — Determination of temperature of deflection under load — Part 1: General test method
Norm
Issue date :
2013 04 09
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
Norm
Issue date :
2010 06 04
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
Norm
Issue date :
1997 12 18
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
Norm
Issue date :
2008 04 22
Plastics — Standard atmospheres for conditioning and testing
Norm
Issue date :
2004 05 11
Plastics — Compression moulding of test specimens of thermoplastic materials
Norm
Issue date :
1996 12 26
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
Norm
Issue date :
2002 06 13
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates
Norm
Issue date :
2001 12 20
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 4: Determination of moulding shrinkage
Norm
Issue date :
2004 01 14
Plastics — Compression moulding of test specimens of thermosetting materials
Norm
Issue date :
2013 11 08
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
Norm
Issue date :
2007 12 03
Plastics — Thermosetting moulding materials — Determination of shrinkage
Norm
Issue date :
1999 03 31
Fire hazard testing Test flames -- 50 W horizontal and vertical flame test methods
Norm
Issue date :
1999 03 31
Fire hazard testing Test flames -- 500 W flame test methods
Norm
Issue date :
2012 02 22
Plastics — Determination of tensile properties — Part 1: General principles
Norm
Issue date :
2012 02 22
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Norm
Issue date :
2003 06 03
Plastics — Determination of creep behaviour — Part 1: Tensile creep
Norm
Issue date :
2012 05 11
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
Norm
Issue date :
2004 07 14
Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
Norm
Issue date :
1999 09 30
Plastics — Methods for determining the density of non-cellular plastics — Part 3: Gas pyknometer method
Norm
Issue date :
1996 07 18
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
Norm
Issue date :
2000 09 21
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing
Norm
Issue date :
1998 11 19
Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 1: General principles and moulding of multipurpose test specimens
Norm
Issue date :
1998 11 19
Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 2: Small plates
Norm
Issue date :
2013 04 15
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and glass transition step height
Norm
Issue date :
2011 04 28
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
Norm
Issue date :
1999 10 07
Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
Norm
Issue date :
2020 02 28
Plastics — Determination of temperature of deflection under load — Part 1: General test method
Norm
Issue date :
2013 04 09
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
Norm
Issue date :
2010 06 04
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
Norm
Issue date :
2020 05 14
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
Norm
Issue date :
2008 04 22
Plastics — Standard atmospheres for conditioning and testing
Norm
Issue date :
2004 05 11
Plastics — Compression moulding of test specimens of thermoplastic materials
Norm
Issue date :
2017 05 10
Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
Norm
Issue date :
2004 01 14
Plastics — Compression moulding of test specimens of thermosetting materials
Norm
Issue date :
2013 11 08
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
Norm
Issue date :
2019 07 26
Plastics — Determination of tensile properties — Part 1: General principles
Norm
Issue date :
2012 02 22
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Norm
Issue date :
2019 02 28
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method (Corrected version 2019-05)
Norm
Issue date :
2019 02 28
Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
Norm
Issue date :
1999 09 30
Plastics — Methods for determining the density of non-cellular plastics — Part 3: Gas pyknometer method
Norm
Issue date :
2007 12 03
Plastics — Thermosetting moulding materials — Determination of shrinkage
Norm
Issue date :
2017 04 12
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
Norm
Issue date :
1998 11 19
Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 1: General principles and moulding of multipurpose test specimens
Norm
Issue date :
1998 11 19
Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 2: Small plates
Norm
Issue date :
2020 03 02
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and step height
Norm
Issue date :
2018 03 16
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
Norm
Issue date :
1999 10 07
Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
Norm
Issue date :
1999 03 31
Fire hazard testing Test flames -- 50 W horizontal and vertical flame test methods
Norm
Issue date :
1999 03 31
Fire hazard testing Test flames -- 500 W flame test methods
Norm
Issue date :
2014 11 01
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2007 + Amd 1:2014) (consolidated version)
Norm
Issue date :
2007 07 09
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
