Please select and order
€143.05
excl. VAT
Add to cart
Norm

ÖNORM EN 806-2

Issue date: 2005 07 01

Specification for installations inside buildings conveying water for human consumption - Part 2: Design

This document gives recommendations, and specifies requirements, on the design of potable water installations within buildings and for pipework outside buildings but wit...
Valid
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 56 Pages
Language:
German | English | Download GER/ENG
Optionally co-design standards:
This document gives recommendations, and specifies requirements, on the design of potable water installations within buildings and for pipework outside buildings but within the premises (see EN 806-1) and applies to new installations, alterations and repairs.
ÖNORM EN 806-2
2005 07 01
Specification for installations inside buildings conveying water for human consumption - Part 2: Des...
Norm
Norm
ÖNORM EN 10226-1
Issue date : 2004 09 01
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
Norm
ÖNORM EN 10240
Issue date : 1998 03 01
Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants
Norm
ÖNORM EN 10242
Issue date : 1995 02 01
Threaded pipe fitting in malleable cast iron
Norm
ÖNORM EN 10255
Issue date : 2007 08 01
Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions
Norm
ÖNORM EN 10284
Issue date : 2000 07 01
Melleable cast iron fittings with compression ends for polyethylene (PE) piping systems
Norm
ÖNORM EN 1057
Issue date : 2006 09 01
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
Norm
ÖNORM EN 12201-1
Issue date : 2008 04 01
Plastics piping systems for water supply - Polyethylene (PE) - Part 1: General
Norm
ÖNORM EN 12201-2
Issue date : 2003 08 01
Plastics piping systems for water supply - Polyethylene (PE) - Part 2: Pipes
Norm
ÖNORM EN 12201-3
Issue date : 2003 08 01
Plastics piping systems for water supply - Polyethylene (PE) - Part 3: Fittings
Norm
ÖNORM EN 12201-5
Issue date : 2003 08 01
Plastics piping systems for water supply - Polyethylene (PE) - Part 5: Fitness for purpose of the system
Norm
ÖNORM EN 12502-1
Issue date : 2005 05 01
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General
Norm
ÖNORM EN 12502-2
Issue date : 2005 05 01
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 2: Influencing factors for copper and copper alloys
Norm
ÖNORM EN 12502-3
Issue date : 2005 05 01
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot dip galvanised ferrous materials
Norm
ÖNORM EN 12502-4
Issue date : 2005 05 01
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels
Norm
ÖNORM EN 12502-5
Issue date : 2005 05 01
Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unalloyed and low alloyed steels
Norm
ÖNORM EN 1254-1
Issue date : 1998 04 01
Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
Norm
ÖNORM EN 1254-1
Issue date : 2007 08 01
Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
Norm
ÖNORM EN 1254-2
Issue date : 1998 04 01
Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
Norm
ÖNORM EN 1254-2
Issue date : 2007 08 01
Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
Norm
ÖNORM EN 1254-3
Issue date : 1998 04 01
Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes
Norm
ÖNORM EN 1254-4
Issue date : 1998 04 01
Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends
Norm
ÖNORM EN 1254-4/AC1
Issue date : 1999 10 01
Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends (Corrigendum)
Norm
ÖNORM EN 1254-5
Issue date : 1998 04 01
Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes
Norm
ÖNORM EN 1254-5
Issue date : 2007 08 01
Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes
Norm
ÖNORM EN 1254-7
Issue date : 2004 07 01
Copper and copper alloys - Plumbing fittings - Part 7: Fittings with press ends for metallic tubes
Norm
ÖNORM EN 12842
Issue date : 2000 09 01
Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
Norm
ÖNORM EN 13443-1
Issue date : 2008 03 01
Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing
Norm
ÖNORM EN 14095
Issue date : 2004 03 01
Water conditioning equipment inside buildings - Electrolytic treatment systems with aluminium anodes - Requirements for performance, safety and testing
Norm
ÖNORM EN 1452-1
Issue date : 2000 02 01
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General
Norm
ÖNORM EN 1452-2
Issue date : 2000 02 01
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes
Norm
ÖNORM EN 1452-3
Issue date : 2000 02 01
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings
Norm
ÖNORM EN 1452-5
Issue date : 2000 02 01
Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system
Norm
ÖNORM EN 14525
Issue date : 2005 02 01
Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U, PE, Fibre-cement
Norm
ÖNORM EN 14743
Issue date : 2007 09 01
Water conditioning equipment inside buildings - Softeners - Requirements for performance, safety and testing
Norm
ÖNORM EN 1487
Issue date : 2000 07 01
Building valves - Hydraulic safety groups - Tests and requirements
Norm
ÖNORM EN 1488
Issue date : 2000 07 01
Building valves - Expansion groups - Tests and requirements
Norm
ÖNORM EN 1489
Issue date : 2000 07 01
Building valves - Pressure safety valves - Tests and requirements
Norm
ÖNORM EN 1490
Issue date : 2000 07 01
Building valves - Combined temperature and pressure relief valves - Tests and requirements
Norm
ÖNORM EN 1491
Issue date : 2000 07 01
Building valves - Expansion valves - Tests and requirements
Norm
ÖNORM EN 1717
Issue date : 2008 04 01
Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow
Norm
ÖNORM EN 545
Issue date : 2007 03 01
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
Norm
ÖNORM EN 545
Issue date : 2008 10 01
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
Norm
ÖNORM EN 625
Issue date : 1996 02 01
Gas-fired central heating boilers - Specific requirements for the domestic hot water operation of combination boilers of nominal heat input not exceeding 70 kW
Norm
ÖNORM EN 805
Issue date : 2000 08 01
Water supply - Requirements for systems and components outside buildings
Norm
ÖNORM EN 806-1
Issue date : 2001 03 01
Specifications for installations inside buildings conveying water for human consumption - Part 1: General
Norm
ÖNORM EN 806-3
Issue date : 2006 08 01
Specifications for installations inside buildings conveying water for human consumption - Part 3: Pipe sizing - Simplified method
Norm
ÖNORM EN 89
Issue date : 2007 06 01
Gas-fired storage water heaters for the production of domestic hot water (consolidated version)
Norm
ÖNORM EN 973
Issue date : 2003 11 01
Chemicals used for treatment of water intended for human consumption - Sodium chloride for regeneration of ion exchangers (EN 973:2002 + A1:2003)
Norm
ÖNORM EN 973
Issue date : 2009 03 01
Chemicals used for treatment of water intended for human consumption - Sodium chloride for regeneration of ion exchangers
Norm
ÖNORM EN ISO 15874-1
Issue date : 2008 03 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2003 + Amd 1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15874-2
Issue date : 2008 03 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2003 + Amd 1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15874-3
Issue date : 2004 06 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2003)
Norm
ÖNORM EN ISO 15874-5
Issue date : 2004 06 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2003)
Norm
ÖNORM EN ISO 15875-1
Issue date : 2008 03 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2003 + Amd 1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15875-2
Issue date : 2008 03 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2003 + Amd 1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15875-3
Issue date : 2004 06 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)
Norm
ÖNORM EN ISO 15875-5
Issue date : 2004 06 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003)
Norm
ÖNORM EN ISO 15876-1
Issue date : 2008 03 01
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General (ISO 15876-1:2003 + Amd 1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15876-2
Issue date : 2008 03 01
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes (ISO 15876-2:2003 + Amd 1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15876-3
Issue date : 2004 06 01
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings (ISO 15876-3:2003)
Norm
ÖNORM EN ISO 15876-5
Issue date : 2004 06 01
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2003)
Norm
ÖNORM EN ISO 15877-1
Issue date : 2004 06 01
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2003)
Norm
ÖNORM EN ISO 15877-1
Issue date : 2006 08 01
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO/DIS 15877-1:2006)
Norm
ÖNORM EN ISO 15877-2
Issue date : 2004 06 01
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO 15877-2:2003)
Norm
ÖNORM EN ISO 15877-2
Issue date : 2006 08 01
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO/DIS 15877-2:2006)
Norm
ÖNORM EN ISO 15877-3
Issue date : 2004 06 01
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO 15877-3:2003)
Norm
ÖNORM EN ISO 15877-3
Issue date : 2006 08 01
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO/DIS 15877-3:2006)
Norm
ÖNORM EN ISO 15877-5
Issue date : 2004 06 01
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2003)
Norm
ÖNORM EN ISO 15877-5
Issue date : 2006 08 01
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO/DIS 15877-5:2006)
Norm
ÖNORM EN ISO 3822-1
Issue date : 1999 07 01
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999)
Norm
ÖNORM EN ISO 3822-2
Issue date : 1995 10 01
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for .......(abbreviated)
Norm
ÖNORM EN ISO 3822-3
Issue date : 1997 07 01
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for .......(abbreviated)
Norm
ÖNORM EN ISO 3822-4
Issue date : 1997 07 01
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances
Norm
ÖNORM EN ISO 6509
Issue date : 1995 07 01
Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981)
Norm
ÖNORM EN ISO 9453
Issue date : 2007 01 01
Soft solder alloys - Chemical compositions and forms (ISO 9453:2006)
Gesetz
Gesetz, mit dem das Wasserversorgungsgesetz geändert wird