Please select and order
€109.76
excl. VAT
Add to cart
Norm

ÖNORM EN 74-2

Issue date: 2009 01 01

Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures

EN 74-2 specifies: - materials; - design requirements; - specified values for resistances and stiffnesses which a coupler has to achieve under test; - test procedures...
Withdrawn: 2022 09 15
Publisher:
Austrian Standards International
Format:
Digital | 39 Pages
Language:
German | English | Download GER/ENG
Currently valid:
Optionally co-design standards:
EN 74-2 specifies: - materials; - design requirements; - specified values for resistances and stiffnesses which a coupler has to achieve under test; - test procedures and assessment; for the following special couplers: - screw or wedge half couplers, sleeve couplers with shear studs, right angle reduction couplers and swivel reduction couplers. It gives recommendations for on-going production control. These couplers are for use principally in temporary works. Each coupler is able to be fixed to at least one side to one 48,3 mm diameter steel or aluminium tube. For the other side of reduction couplers, this standard specifies requirements for the diameter and wall thickness of tubes. For testing, screw couplers are tightened with a torque of 50 Nm and wedge couplers are tightened with a 500 g hammer until the jarring blow. Other special half couplers such as half couplers attached by riveting, used mainly for members of prefabricated scaffolds, are outside the scope of this European Standard.
ÖNORM EN 74-2
2022 09 15
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers -...
Norm
ÖNORM EN 74-2
2009 01 01
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers -...
Norm
Norm
ÖNORM EN 1090-2
Issue date : 2005 07 01
Execution of steel structures and aluminium structures - Part 2: Technical requirements for the execution of steel structures
Norm
ÖNORM EN 12811-1
Issue date : 2004 06 01
Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design
Norm
ÖNORM EN 12811-2
Issue date : 2004 06 01
Temporary works equipment - Part 2: Information on materials
Norm
ÖNORM EN 12811-3
Issue date : 2005 03 01
Temporary works equipment - Part 3: Load testing (consolidated version)
Norm
ÖNORM EN 74-1
Issue date : 2006 01 01
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
Norm
ÖNORM EN ISO 898-1
Issue date : 1999 12 01
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999)
Norm
ÖNORM EN ISO 898-1
Issue date : 2007 02 01
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO/DIS 898-1:2006)
Norm
ÖNORM EN 74-2
Issue date : 2022 09 15
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures