Please select and order
€120.67
excl. VAT
Add to cart
Norm
ÖNORM EN 200
Issue date: 2005 06 01
Sanitary tapware - Single taps and combination taps (PN 10) - General technical specification
This document specifies:
the field of application for pillar taps, bib taps, single and multi-hole combination taps:
for a supply system Type 1, (see Figure 1);
for...
Withdrawn: 2008 12 01
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 45 Pages
Language:
German
| English
Currently valid:
Optionally co-design standards:
ICS
This document specifies:
the field of application for pillar taps, bib taps, single and multi-hole combination taps:
for a supply system Type 1, (see Figure 1);
for a supply system (Type 2, (see Figure 2);
the dimensional, tightness, pressure resistance, hydraulic, mechanical strength, endurance and acoustic
characteristics of nominal size ½ and ¾ single taps and combination taps;
test methods to verify the characteristics.
NOTE Tests described in this document are type tests and not quality control tests carried out during manufacture.
This document applies to draw-off taps (single taps and combination taps) for use with sanitary appliances installed
in rooms used for bodily hygiene (cloakrooms, bathrooms etc.) and in kitchens i.e. for use with baths, wash basins,
bidets, showers and sinks.
Figure 1 shows the supply system of Type 1 with a pressure range of (0,05 to 1,0) MPa (0,5 to 10) bar.
Figure 2 shows the supply system of Type 2 with a pressure range of (0,01 to 1,0) MPa (0,1 to 10) bar.
This document applies to sanitary draw-off taps of nominal size ½ and ¾ (PN 10).
The conditions of use and classifications are given in Table 1.
It does not cover mechanical mixing valves, thermostatic mixing valves, shower accessories or taps adapted for
special use (e.g. hose union taps)
ÖNORM EN 200
2008 12 01
Sanitary tapware - Single taps and combination taps (PN 10) - General technical specification
Norm
ÖNORM EN 200
2005 06 01
Sanitary tapware - Single taps and combination taps (PN 10) - General technical specification
Norm
↖
ÖNORM EN 200
1992 05 01
Sanitary tapware - General technical specifications for single taps and mixer taps (nominal size 1/2...
Norm
Norm
Issue date :
2008 05 01
Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification
Norm
Issue date :
2008 05 01
Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification
Norm
Issue date :
2008 04 01
Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow
Norm
Issue date :
2003 12 01
Sanitary tapware - General specifications for flow rate regulators
Norm
Issue date :
2003 02 01
Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr
Norm
Issue date :
2003 06 01
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
Norm
Issue date :
1999 07 01
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999)
Norm
Issue date :
1995 10 01
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for .......(abbreviated)
Norm
Issue date :
1997 07 01
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for .......(abbreviated)
Norm
Issue date :
1997 07 01
Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances
Norm
Issue date :
2008 12 01
Sanitary tapware - Single taps and combination taps (PN 10) - General technical specification