Please select and order
€377.90
excl. VAT
Add to cart
Norm
ÖNORM EN 1999-1-1
Issue date: 2010 08 15
Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules (consolidated version)
EN 1999 applies to the design of buildings and civil engineering and structural works in aluminium. It complies
with the principles and requirements for the safety and s...
Withdrawn: 2014 04 01
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 242 Pages
Language:
German
| English
| Download GER/ENG
Currently valid:
Optionally co-design standards:
EN 1999 applies to the design of buildings and civil engineering and structural works in aluminium. It complies
with the principles and requirements for the safety and serviceability of structures, the basis of their design and
verification that are given in EN 1990 ¿ Basis of structural design.
EN 1999 is only concerned with requirements for resistance, serviceability, durability and fire resistance of
aluminium structures. Other requirements, e.g. concerning thermal or sound insulation, are not considered.
ÖNORM EN 1999-1-1
2014 04 01
Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules (consolidated versio...
Norm
ÖNORM EN 1999-1-1
2010 08 15
Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules (consolidated versio...
Norm
↖
ÖNORM ENV 1999-1-1
2000 06 01
Eurocode 9: Design of aluminium structures - Part 1-1: General rules - General rules and rules for b...
Vornorm
ÖNORM ENV 1999-1-1
1998 11 01
Eurocode 9: Design of aluminium structures - Part 1-1: General rules - General rules and rules for b...
Vornorm
Norm
Issue date :
1987 12 17
General principles on reliability for structures — List of equivalent terms
Norm
Issue date :
2001 12 20
Adhesives — Determination of shear behaviour of structural adhesives — Part 1: Torsion test method using butt-bonded hollow cylinders
Norm
Issue date :
2001 12 20
Adhesives — Determination of shear behaviour of structural adhesives — Part 2: Tensile test method using thick adherends
Norm
Issue date :
1992 03 01
Mechanical properties of fasteners - Bolts, screws, studs and nuts made of nonferrous metals
Norm
Issue date :
1994 03 01
Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products
Norm
Issue date :
2014 04 01
Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013)
Norm
Issue date :
1994 09 01
Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements
Norm
Issue date :
2008 09 01
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form
Norm
Issue date :
2008 09 01
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form
Norm
Issue date :
2008 09 01
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form
Norm
Issue date :
2008 09 01
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form
Norm
Issue date :
2008 08 01
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form
Norm
Issue date :
2008 08 01
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form
Norm
Issue date :
2008 08 01
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form
Norm
Issue date :
2008 08 01
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form
Norm
Issue date :
2013 10 01
Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013)
Norm
Issue date :
2008 08 01
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery
Norm
Issue date :
2008 09 01
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
Norm
Issue date :
2011 05 01
Founding - Technical conditions of delivery - Part 1: General
Norm
Issue date :
2012 02 01
Founding - Liquid penetrant inspection - Part 1: Sand, gravity die and low pressure die castings
Norm
Issue date :
1997 11 01
Aluminium and aluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery
Norm
Issue date :
1998 03 01
Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996)
Norm
Issue date :
2010 04 01
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009)
Norm
Issue date :
2008 09 01
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form
Norm
Issue date :
2008 08 01
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form
Norm
Issue date :
2008 08 01
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form
Norm
Issue date :
2008 09 01
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form
Norm
Issue date :
1999 09 01
Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings
Norm
Issue date :
2000 04 01
Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties
Norm
Issue date :
2000 04 01
Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices
Norm
Issue date :
2004 05 01
Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys (EN 1011-4:2000 + A1:2003)
Norm
Issue date :
2008 11 01
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium
Norm
Issue date :
2008 09 01
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
Norm
Issue date :
2002 03 01
Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
Norm
Issue date :
2002 06 01
Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form
Norm
Issue date :
2002 06 01
Geometrical Product Specifications (GPS) - Indication of surface texture in technical product documentation (ISO 1302:2002)
Norm
Issue date :
2013 03 15
Eurocode - Basis of structural design (consolidated version)
Norm
Issue date :
2003 09 01
Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products
Norm
Issue date :
2013 01 15
Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting (consolidated version)
Norm
Issue date :
2010 08 15
Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures (consolidated version)
Norm
Issue date :
2010 05 15
Eurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design (consolidated version)
Norm
Issue date :
2013 10 15
Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue (consolidated version)
Norm
Issue date :
2013 12 01
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
Norm
Issue date :
2010 03 01
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery
Norm
Issue date :
2013 12 01
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties
Norm
Issue date :
2008 12 01
Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
Norm
Issue date :
2013 12 01
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
Norm
Issue date :
2013 04 15
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
Norm
Issue date :
2013 12 01
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
Norm
Issue date :
2021 01 07
General principles on reliability for structures — Vocabulary
Norm
Issue date :
2014 04 01
Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules (consolidated version)