Please select and order
€219.54
excl. VAT
Add to cart
Norm
ÖNORM EN 1996-1-1
Issue date: 2006 03 01
Eurocode 6 - Design of masonry structures - Part 1-1: Common rules for reinforced and unreinforced masonry structures
1.1.1 Scope of Eurocode 6
(1)P Eurocode 6 applies to the design of buildings and civil engineering works, or parts thereof, in
unreinforced, reinforced, prestressed and...
Withdrawn: 2009 11 15
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 115 Pages
Language:
German
| English
Currently valid:
Optionally co-design standards:
1.1.1 Scope of Eurocode 6
(1)P Eurocode 6 applies to the design of buildings and civil engineering works, or parts thereof, in
unreinforced, reinforced, prestressed and confined masonry.
(2)P Eurocode 6 deals only with the requirements for resistance, serviceability and durability of
structures. Other requirements, for example, concerning thermal or sound insulation, are not
considered.
(3)P Execution is covered to the extent that is necessary to indicate the quality of the construction
materials and products that should be used and the standard of workmanship on site needed to
comply with the assumptions made in the design rules.
(4)P Eurocode 6 does not cover the special requirements of seismic design. Provisions related to such
requirements are given in Eurocode 8 which complements, and is consistent with Eurocode 6.
(5)P Numerical values of the actions on buildings and civil engineering works to be taken into
account in the design are not given in Eurocode 6. They are provided in Eurocode 1.
1.1.2 Scope of Part 1-1 of Eurocode 6
(1)P The basis for the design of buildings and civil engineering works in masonry is given in this
Part 1-1 of Eurocode 6, which deals with unreinforced masonry and reinforced masonry where the
reinforcement is added to provide ductility, strength or improve serviceability. The principles of the
design of prestressed masonry and confined masonry are given, but application rules are not provided.
This Part is not valid for masonry with a plan area of less than 0,04 m2.
EN 1996-1-1:2005 (E)
12
(2) For those types of structures not covered entirely, for new structural uses for established materials,
for new materials, or where actions and other influences outside normal experience have to be
resisted, the principles and application rules given in this EN may be applicable, but may need to be
supplemented.
(3) Part 1-1 gives detailed rules which are mainly applicable to ordinary buildings. The applicability
of these rules may be limited, for practical reasons or due to simplifications; any limits of
applicability are given in the text where necessary.
(4)P The following subjects are dealt with in Part 1-1:
section 1 : General;
section 2 : Basis of design;
section 3 : Materials;
section 4 : Durability;
section 5 : Structural analysis;
section 6 : Ultimate Limit State;
section 7 : Serviceability Limit State;
section 8 : Detailing;
section 9 : Execution;
(5)P Part 1-1 does not cover:
resistance to fire (which is dealt with in EN 1996-1-2);
particular aspects of special types of building (for example, dynamic effects on tall buildings);
particular aspects of special types of civil engineering works (such as masonry bridges, dams,
chimneys or liquid-retaining structures);
particular aspects of special types of structures (such as arches or domes);
masonry where gypsum, with or without cement, mortars are used;
masonry where the units are not laid in a regular pattern of courses (rubble masonry);
masonry reinforced with other materials than steel.
1.1.3 Further Parts of Eurocode 6
(1) Part 1-1 of Eurocode 6 will be supplemented by further Parts as follows:
Part 1-2: General rules - Structural fire design.
EN 1996-1-1:2005 (E)
13
Part 2: Design, selection of materials and execution of masonry.
Part 3: Simplified calculation methods for unreinforced masonry structures.
ÖNORM EN 1996-1-1
2022 08 15
Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced ...
Norm
ÖNORM EN 1996-1-1
2013 01 01
Eurocode 6: Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced m...
Norm
ÖNORM EN 1996-1-1
2009 11 15
Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced ...
Norm
ÖNORM EN 1996-1-1
2006 03 01
Eurocode 6 - Design of masonry structures - Part 1-1: Common rules for reinforced and unreinforced m...
Norm
↖
ÖNORM ENV 1996-1-3
1999 03 01
Eurocode 6: Design of masonry structures - Part 1-3: General rules for buildings - Detailed rules on...
Vornorm
ÖNORM ENV 1996-1-1
1997 01 01
Eurocode 6: Design of masonry structures - Part 1-1: General rules for buildings - Rules for reinfor...
Vornorm
ÖNORM ENV 1996-1-1
1995 09 01
Eurocode 6: Design of masonry structures - Part 1-1: General rules for buildings - Rules for reinfor...
Vornorm
Norm
Issue date :
1999 01 01
Methods of test for masonry - Part 1: Determination of compressive strength
Norm
Issue date :
2009 08 01
Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
Norm
Issue date :
2007 03 01
Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar (consolidated version)
Norm
Issue date :
1999 11 01
Methods of test for masonry - Part 2: Determination of flexural strength
Norm
Issue date :
2000 05 01
Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints
Norm
Issue date :
2000 08 01
Methods of test for masonry - Part 4: Determination of shear strength including damp proof course
Norm
Issue date :
2000 10 01
Methods of test for masonry units - Part 1: Determination of compressive strength
Norm
Issue date :
2005 12 01
Specification for masonry units - Part 6: Natural stone masonry units
Norm
Issue date :
2003 07 01
Specification for ancillary components for masonry - Part 2: Lintels
Norm
Issue date :
2003 08 01
Specification for mortar for masonry - Part 2: Masonry mortar
Norm
Issue date :
2007 06 01
Methods of test for masonry - Part 3: Determination of initial shear strength (consolidated version)
Norm
Issue date :
2005 06 01
Specification for masonry units - Part 1: Clay masonry units (consolidated version)
Norm
Issue date :
2006 02 01
Specification for mortar for masonry - Part 1: Rendering and plastering mortar (consolidated version)
Norm
Issue date :
2008 07 01
Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
Norm
Issue date :
2008 07 01
Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets
Norm
Issue date :
2005 06 01
Specification for masonry units - Part 2: Calcium silicate masonry units (consolidated version)
Norm
Issue date :
2005 06 01
Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates) (consolidated version)
Norm
Issue date :
2005 06 01
Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units (consolidated version)
Norm
Issue date :
2005 06 01
Specification for masonry units - Part 5: Manufactured stone masonry units (consolidated version)
Norm
Issue date :
2005 06 01
Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method
Norm
Issue date :
2005 09 01
Steel for the reinforcement of concrete - Weldable reinforcing steel - General
Norm
Issue date :
2009 11 15
Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry (consolidated version)
Norm
Issue date :
2009 11 15
Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures (consolidated version)