Please select and order
€109.76
excl. VAT
Add to cart
Norm
ÖNORM EN 1889-1
Issue date: 2003 11 01
Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
1.1 This European Standard specifies the safety requirements and tests for self-propelled rubber tyred vehicles (defined
in clause 3) intended primarily for use in under...
Withdrawn: 2011 09 01
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 41 Pages
Language:
German
| English
| Download GER/ENG
Currently valid:
Optionally co-design standards:
ICS
1.1 This European Standard specifies the safety requirements and tests for self-propelled rubber tyred vehicles (defined
in clause 3) intended primarily for use in underground mining (i.e. mine vehicles) and other underground workings (e.g.
tunnelling vehicles). The electrical supply voltage is limited to 1100 A.C. and 1500 D.C.
1.2 This European Standard deals with the technical requirements to minimise the hazards listed in clause 4 which can
arise during the commissioning, the travelling operation and the maintenance of rubber tyred vehicles when carried out in
accordance with the specifications given by the manufacturer or his authorized representative.
1.3 This European Standard does not include rubber tyred drilling rigs, which are covered by EN 791, or earth moving
machinery not intended primarily for use in underground mines, which are covered by EN 474 series. This European
Standard does not take account of specific hazards associated with special-purpose vehicles, e.g. tankers, explosives
vehicles.
This European Standard does not address operation in potentially explosive atmospheres, which is covered by another
European Standard. Hazards due to noise are excluded from this standard, but a separate standard is in preparation
where hazards due to noise will be addressed. This European Standard does not address remote control or deal with
radiation and vibration. It does not deal with any equipment installed on the vehicle for purposes other than travelling.
1.4 This European Standard applies to vehicles which are manufactured after the date of issue of this standard.
ÖNORM EN ISO 19296
2019 06 15
Mining - Mobile machines working underground - Machine safety (ISO 19296:2018)
Norm
ÖNORM EN 1889-1
2011 09 01
Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred...
Norm
ÖNORM EN 1889-1
2003 11 01
Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred...
Norm
↖
Norm
Issue date :
1998 07 16
Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test (Corrected version 1999-04)
Norm
Issue date :
1993 12 16
Earth-moving machinery — Symbols for operator controls and other displays — Part 2: Specific symbols for machines, equipment and accessories
Norm
Issue date :
1994 10 06
Rubber hoses and hose assemblies for underground mining — Wire-reinforced hydraulic types for coal mining — Specification
Norm
Issue date :
2004 01 12
Graphical symbols for use on equipment — Index and synopsis
Norm
Issue date :
2004 07 14
Earth-moving machinery — Articulated frame lock — Performance requirements
Norm
Issue date :
2008 08 01
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
Norm
Issue date :
2008 09 01
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
Norm
Issue date :
2009 06 01
Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986 + Amd 1:1989)
Norm
Issue date :
2009 05 15
Earth moving machinery - Braking systems of rubber-tyred machines - Systems and performance requirements and test procedures (ISO 3450:1996)
Norm
Issue date :
2009 04 15
Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
Norm
Issue date :
2009 04 15
Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
Norm
Issue date :
2009 01 01
Safety of machinery - Human body measurements - Part 3: Anthropometric data
Norm
Issue date :
2010 01 01
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators
Norm
Issue date :
2009 02 01
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
Norm
Issue date :
2009 06 01
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
Norm
Issue date :
1998 03 01
Rubber and plastics hoses - Method of test for flammability (ISO 8030:1995)
Norm
Issue date :
2011 09 15
Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines
Norm
Issue date :
2009 02 01
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
Norm
Issue date :
2009 03 01
Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005)
Norm
Issue date :
2009 04 01
Earth-moving machinery - Access systems (ISO 2867:2006, including Cor 1:2008)
Norm
Issue date :
2008 02 01
Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)
Norm
Issue date :
2014 02 10
Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test
Norm
Issue date :
2017 01 30
Earth-moving machinery — Symbols for operator controls and other displays — Part 1: Common symbols
Norm
Issue date :
2017 01 30
Earth-moving machinery — Symbols for operator controls and other displays — Part 2: Symbols for specific machines, equipment and accessories
Norm
Issue date :
2020 06 10
Rubber hoses and hose assemblies for underground mining — Wire-reinforced hydraulic types for coal mining — Specification
Norm
Issue date :
2019 07 12
Graphical symbols for use on equipment — Registered symbols
Norm
Issue date :
2004 07 14
Earth-moving machinery — Articulated frame lock — Performance requirements
Norm
Issue date :
2011 09 01
Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles