Please select and order
€120.67
excl. VAT
Add to cart
Norm

ÖNORM EN 1519-1

Issue date: 2014 09 15

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system

This European Standard specifies the requirements for pipes, fittings and the system of polyethylene (PE) solid-wall piping systems in the field of soil and waste dischar...
Withdrawn: 2019 07 15
This European Standard specifies the requirements for pipes, fittings and the system of polyethylene (PE) solid-wall piping systems in the field of soil and waste discharge inside buildings (marked with "B") and for both inside buildings and buried in ground within the building structure (marked with "BD"). It also specifies the test parameters for the test methods referred to in this standard. This standard is applicable to PE pipes and fittings, their joints and to joints with components of other plastics and non-plastics materials intended to be used for the following purposes: a) soil and waste discharge pipework for the conveyance of domestic waste waters (low and high temperature), b) ventilation pipework associated with a), c) rainwater pipework within the building structure. It applies to pipes and fittings, marked with "B", which are intended to be used inside buildings and outside buildings fixed onto the wall. It applies to pipes and fittings, marked with "BD", which are intended to be used for both inside buildings and buried in ground within the building structure. This standard is applicable to PE pipes and fittings of the following types: plain-ended, with integral elastomeric ring seal socket, for butt fusion joints, for electrofusion joints and for mechanical joints, whereby the fittings can be manufactured by injection-moulding or can be fabricated from pipes and/or mouldings. This standard covers a range of nominal sizes, a range of pipe series and gives recommendations concerning colours.
ÖNORM EN 1519-1
2022 08 15
Plastics piping systems for soil and waste discharge (low and high temperature) within the building ...
Norm
ÖNORM EN 1519-1
2019 07 15
Plastics piping systems for soil and waste discharge (low and high temperature) within the building ...
Norm
ÖNORM EN 1519-1
2014 09 15
Plastics piping systems for soil and waste discharge (low and high temperature) within the building ...
Norm
ÖNORM EN 1519-1
2000 01 01
Plastics piping systems for soil and waste discharge (low and high temperature) within the building ...
Norm
Expand
Norm
ÖNORM EN ISO 9001
Issue date : 2009 08 15
Quality management systems - Requirements (ISO 9001:2008 + Cor.1:2009) (consolidated version)
Norm
ÖNORM EN ISO 9001
Issue date : 2014 08 01
Quality management systems - Requirements (ISO/DIS 9001:2014)
Norm
ÖNORM EN ISO 2505
Issue date : 2005 10 01
Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005)
Norm
ÖNORM EN ISO 580
Issue date : 2005 06 01
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005)
Norm
ÖNORM EN ISO 1167-2
Issue date : 2006 07 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
Norm
ÖNORM EN ISO 1167-1
Issue date : 2006 07 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
Norm
ÖNORM EN ISO 9969
Issue date : 2008 03 01
Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2007)
Norm
ÖNORM EN 1054
Issue date : 1996 11 01
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints
Norm
ÖNORM EN 1053
Issue date : 1996 11 01
Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness
Norm
ÖNORM EN 1055
Issue date : 1996 11 01
Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
Norm
ÖNORM EN 1277
Issue date : 2004 06 01
Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
Norm
ÖNORM EN 728
Issue date : 1997 11 01
Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time
Norm
ÖNORM EN 14741
Issue date : 2006 07 01
Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
Norm
ÖNORM EN ISO 3126
Issue date : 2005 06 01
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
Norm
ÖNORM B 5177
Issue date : 1989 03 01
Pipes and fittings of high density polyethylene (PE-HD) for hot water resistant waste and soil discharge systems of buildings and estates; dim., techn. terms of del., tests ...
Norm
ÖNORM EN ISO 9001
Issue date : 2015 11 15
Quality management systems - Requirements (ISO 9001:2015)
Norm
ÖNORM EN ISO 9002
Issue date : 1994 09 01
Quality systems - Model for quality assurance in production, installation and servicing (ISO 9002:1994)
Norm
ISO 265-1:1988
Issue date : 1988 12 29
Pipes and fittings of plastics materials — Fittings for domestic and industrial waste pipes — Basic dimensions: Metric series — Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
Norm
ISO 472:1988
Issue date : 1988 12 29
Plastics — Vocabulary
Norm
ISO 1043-1:1997
Issue date : 1997 02 27
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
Norm
ISO 1133:1991
Issue date : 1991 03 28
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
Norm
ISO 4065:1996
Issue date : 1996 12 26
Thermoplastics pipes — Universal wall thickness table
Norm
ISO 4440-1:1994
Issue date : 1994 09 29
Thermoplastics pipes and fittings — Determination of melt mass-flow rate — Part 1: Test method
Norm
ISO 4440-2:1994
Issue date : 1994 09 29
Thermoplastics pipes and fittings — Determination of melt mass-flow rate — Part 2: Test conditions
Norm
ÖNORM EN 1519-1
Issue date : 2019 07 15
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system