Please select and order
€185.23
excl. VAT
Add to cart
Norm
ÖNORM EN 14276-1
Issue date: 2006 11 01
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
This European Standard specifies the requirements for material, design, manufacturing, testing and documentation
for stationary pressure vessels intended for use in refr...
Withdrawn: 2011 05 15
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 87 Pages
Language:
German
| English
Currently valid:
Optionally co-design standards:
This European Standard specifies the requirements for material, design, manufacturing, testing and documentation
for stationary pressure vessels intended for use in refrigerating systems and heat pumps. These systems are referenced
in this standard as refrigerating systems as defined in EN 378-1.
This European Standard applies to vessels including welded or brazed attachments up to and including the nozzle
flanges, screwed, welded or brazed connectors or to the edge to be welded or brazed at the first circumferential
joint connecting piping or other elements.
This European Standard applies to pressure vessels with an internal pressure down to ¿ 1 bar, to account for the
evacuation of the vessel prior to charging with refrigerant.
This European Standard applies to both the mechanical loading conditions and thermal conditions as defined in
EN 13445-3 associated with refrigerating systems. It applies to pressure vessels subject to the maximum allowable
temperatures for which nominal design stresses for materials are derived using EN 13445-2 and EN 13445-3 or as
specified in this standard. In addition vessels designed to this standard should have a maximum design temperature
not exceeding 200 °C and a maximum design pressure not exceeding 64 bars. Outside of these limits, it is important
that EN 13445 be used for the design, construction and inspection of the vessel. Under these circumstances
it is important that the unique nature of refrigerating plant, as indicated in the introduction to this standard,
also be taken into account.
It is important that pressure vessels used in refrigerating systems and heat pumps of category less than II as defined
in Annex H comply with other relevant clauses of EN 378-2 for vessels.
This European Standard applies to pressure vessels where the main pressure bearing parts are manufactured from
metallic ductile materials as defined in Clause 4 and Annex I of this standard.
This European Standard does not apply to vessels of the following types:
- vessels of riveted construction;
- multilayered, autofrettaged or prestressed vessels;
- vessels directly heated by a flame;
- roll bond heat exchangers.
ÖNORM EN 14276-1
2020 07 01
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements...
Norm
ÖNORM EN 14276-1
2011 05 15
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements...
Norm
ÖNORM EN 14276-1
2006 11 01
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements...
Norm
↖
Norm
Issue date :
2005 03 01
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
Norm
Issue date :
1994 10 01
Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992)
Norm
Issue date :
1995 04 01
Filler metal for soft soldering, brazing and braze welding - Designation (ISO 3677:1992)
Norm
Issue date :
2008 09 01
Copper and copper alloys - Material condition designation
Norm
Issue date :
2010 05 15
Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009)
Norm
Issue date :
2001 11 01
Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing (Corrigendum)
Norm
Issue date :
1997 07 01
Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
Norm
Issue date :
1997 08 01
Brazing - Fluxes for brazing - Classification and technical delivery conditions
Norm
Issue date :
1998 03 01
Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
Norm
Issue date :
2008 09 01
Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions
Norm
Issue date :
1999 10 01
Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
Norm
Issue date :
2009 11 01
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2009)
Norm
Issue date :
2002 06 01
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002)
Norm
Issue date :
2002 09 01
Pressure equipment - Part 2: Quantities, symbols and units
Norm
Issue date :
2002 09 01
Pressure equipment - Part 3: Definition of parties involved
Norm
Issue date :
2003 02 01
Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
Norm
Issue date :
2003 02 01
Pressure equipment - Part 5: Compliance and inspection documentation of materials
Norm
Issue date :
2009 01 01
Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
Norm
Issue date :
2003 09 01
Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003)
Norm
Issue date :
2004 03 01
Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
Norm
Issue date :
2004 03 01
Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003)
Norm
Issue date :
2004 08 01
Pressure equipment - Terminology - Part 1: Pressure, temperature, volume, nominal size
Norm
Issue date :
2010 09 01
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004+Amd 1:2008)
Norm
Issue date :
2004 10 01
Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004)
Norm
Issue date :
2005 01 01
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
Norm
Issue date :
2011 02 15
Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys
Norm
Issue date :
2011 03 15
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
Norm
Issue date :
2009 07 01
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
Norm
Issue date :
2009 12 15
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery
Norm
Issue date :
2011 06 01
Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) (multilingual version: de/en/fr)
Norm
Issue date :
1998 12 20
Welding and allied processes — Vocabulary — Part 1: Metal welding processes
Norm
Issue date :
1985 04 25
Welding and allied processes — Assemblies made with soft solders and brazing filler metals — Mechanical test methods
Norm
Issue date :
2011 05 15
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements