Please select and order
€219.54
excl. VAT
Add to cart
Norm

ÖNORM EN 13786

Issue date: 2005 04 01

Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures (consolidated version)

This European Standard defines the constructional and operational characteristics, the safety requirements and test methods, and the marking of automatic change over dev...
Withdrawn: 2009 05 01
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 129 Pages
Language:
German | English
Currently valid:
This European Standard defines the constructional and operational characteristics, the safety requirements and test methods, and the marking of automatic change over devices with a capacity of less than or equal to 100 kg/h and having a maximum regulated pressure of less than or equal to 4 bar for butane, propane or their mixtures only in the vapour phase. NOTE 1 bar = 105 Pa Liquefied gases containing methylacetylene and propadiene are not covered by this standard. This European Standard also covers safety devices likely to be fitted onto automatic change over devices. The characteristics of these devices are given in annex A. The requirements of this European Standard generally cover designs where regulation is in one stage, using a single diaphragm. These requirements do not exclude designs using more than one diaphragm, provided that these diaphragms are integrated in a single automatic change over devices complying with the requirements of this European Standard. For specific uses in caravans and leisure vehicles, the automatic change over devices function may also be carried out by an assembly of regulators, forming a "automatic change over devices system" as defined in 3.1.2. This standard covers such an assembly as follows: - special requirements for the manufacture, adjustment and operation of regulators forming a automatic change over devices system, as well as the corresponding test methods are given in annex B; - except for these special requirements, and unless otherwise stated, constructional and performance characteristics given in the body of the standard are also applicable to the devices in annex B. The requirements apply generally to automatic change over device used in locations where the temperature likely to be reached during use is between -20 °C and +50 °C. When the devices are used at temperatures outside this range they shall comply with special requirements defined in a (...abbreviated)
ÖNORM EN 16129
2013 09 01
Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, wi...
Norm
ÖNORM EN 13786
2011 02 15
Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a ca...
Norm
ÖNORM EN 13786
2009 05 01
Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a ca...
Norm
ÖNORM EN 13786
2005 04 01
Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a ca...
Norm
ÖNORM EN 13786
2004 10 01
Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a ca...
Norm
Expand
Norm
ISO 301:2006
Issue date : 2006 09 01
Zinc alloy ingots intended for castings
Norm
ISO 565:1990
Issue date : 1990 07 12
Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
Norm
ISO 7-1:1994
Issue date : 1994 05 12
Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ISO 7005-2:1988
Issue date : 1988 12 08
Metallic flanges — Part 2: Cast iron flanges
Norm
ÖNORM EN 12164
Issue date : 1998 04 01
Copper and copper alloys - Rod for free machining purposes
Norm
ÖNORM EN 12165
Issue date : 1998 04 01
Copper and copper alloys - Wrought and unwrought forging stock
Norm
ÖNORM EN 13785
Issue date : 2007 05 01
Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures (consolidated version)
Norm
ÖNORM EN 1949
Issue date : 2006 03 01
Specification for the installation of LPG systems for habitation purposes in leisure accomodation vehicles and in other vehicles (consolidated version)
Norm
ÖNORM EN 437
Issue date : 2003 09 01
Test gases - Test pressures - Appliance categories
Norm
ÖNORM EN 549
Issue date : 1995 02 01
Rubber materials for seals and diaphragms for gas appliances and gas equipment
Norm
ÖNORM EN ISO 178
Issue date : 2005 05 01
Plastics - Determination of flexural properties (ISO 178:2001 + Amd 1:2004) (consolidated version)
Norm
ÖNORM EN ISO 178
Issue date : 2008 09 01
Plastics - Determination of flexural properties (ISO/DIS 178:2008)
Norm
ÖNORM EN ISO 180
Issue date : 2007 06 01
Plastics - Determination of Izod impact strength (ISO 180:2000 + Amd . 1:2006) (consolidated version)
Norm
ÖNORM EN ISO 228-1
Issue date : 2003 06 01
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
Norm
ÖNORM EN ISO 3166-1
Issue date : 2007 03 01
Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2006)
Norm
ÖNORM EN ISO 4892-3
Issue date : 2006 05 01
Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2006)
Norm
ÖNORM EN ISO 527-4
Issue date : 1997 09 01
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997)
Norm
ÖNORM EN ISO 75-3
Issue date : 2006 09 01
Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004) (consolidated version)
Norm
ÖNORM EN ISO 9773
Issue date : 2004 03 01
Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens (ISO 9773:1998 + A1:2003)
Norm
ISO 7-1:1994
Issue date : 1994 05 12
Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ISO 301:2006
Issue date : 2006 09 01
Zinc alloy ingots intended for castings
Norm
ISO 565:1990
Issue date : 1990 07 12
Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
Norm
ISO 7005-2:1988
Issue date : 1988 12 08
Metallic flanges — Part 2: Cast iron flanges
Norm
ÖNORM EN 13786
Issue date : 2009 05 01
Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures