Please select and order
€109.76
excl. VAT
Add to cart
Norm
ÖNORM EN 13362
Issue date: 2006 05 01
Geosynthetic Barriers - Characteristics required for use in the construction of canals
This European Standard specifies the relevant characteristics of geosynthetic barriers, including polymeric
geosynthetic barriers, clay geosynthetic barriers and bitumin...
Withdrawn: 2013 09 01
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 34 Pages
Language:
German
| English
| Download GER/ENG
Currently valid:
Optionally co-design standards:
This European Standard specifies the relevant characteristics of geosynthetic barriers, including polymeric
geosynthetic barriers, clay geosynthetic barriers and bituminous geosynthetic barriers, when used as fluid barriers
in the construction of canals, and the appropriate test methods to determine these characteristics.
The intended use of these products is to control the leakage of water through the construction.
This European Standard is not applicable to geotextiles or geotextile-related products.
This European Standard provides for the evaluation of conformity of the product to this European Standard.
This European Standard defines requirements to be met by manufacturers and their authorised representatives
with regard to the presentation of product properties.
This European Standard does not cover applications where the geosynthetic barrier is to be in contact with water
that has been treated for human consumption.
NOTE Where potable water is or may be in direct contact with the product the designer should also refer to other relevant
standards, requirements and/or regulations.
ÖNORM EN 13362
2018 07 15
Geosynthetic Barriers - Characteristics required for use in the construction of canals
Norm
ÖNORM EN 13362
2013 09 01
Geosynthetic barriers - Characteristics required for use in the construction of canals
Norm
ÖNORM EN 13362
2006 05 01
Geosynthetic Barriers - Characteristics required for use in the construction of canals
Norm
↖
Norm
Issue date :
2010 09 03
Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
Norm
Issue date :
2008
Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C With a Vitreous Silica Dilatometer
Norm
Issue date :
2012 07 01
Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
Norm
Issue date :
2009
Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
Norm
Issue date :
2011
Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners
Norm
Issue date :
2003 02 01
Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995 + Corr.1:1998 + Corr.2:2001)
Norm
Issue date :
2012 05 15
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
Norm
Issue date :
2006 12 01
Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006)
Norm
Issue date :
2008 10 01
Geosynthetics - Wide-width tensile test (ISO 10319:2008)
Norm
Issue date :
1997 09 01
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997)
Norm
Issue date :
1999 05 01
Geotextiles and geotextile-related products - Identification on site (ISO 10320:1999)
Norm
Issue date :
2013 06 01
Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature
Norm
Issue date :
2000 01 01
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of resistance to tearing (nail shank)
Norm
Issue date :
2000 01 01
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties
Norm
Issue date :
2000 05 01
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing
Norm
Issue date :
2000 12 01
Geotextiles and geotextile-related products - Determination of the resistance to weathering
Norm
Issue date :
2000 12 01
Geotextiles and geotextile-related products - Method for determining the microbiological resistance by a soil burial test
Norm
Issue date :
2013 07 01
Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing
Norm
Issue date :
2010 01 15
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
Norm
Issue date :
2004 02 01
Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
Norm
Issue date :
2004 08 01
Geosynthetics - Screening test method for determining chemical resistance for landfill applications
Norm
Issue date :
2004 08 01
Geosynthetic barriers - Test method for determining the resistance to leaching
Norm
Issue date :
2005 04 01
Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO 13438:2004)
Norm
Issue date :
2005 04 01
Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005)
Norm
Issue date :
2005 04 01
Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2:2005)
Norm
Issue date :
2005 04 01
Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test (ISO 12957-1:2005)
Norm
Issue date :
2005 04 01
Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers (ISO 9863-1:2005)
Norm
Issue date :
2005 06 01
Geosynthetic barriers - Screening test method for determining the resistance to oxidation
Norm
Issue date :
2013 09 01
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
Norm
Issue date :
2006 05 01
Geosynthetics - Terms and definitions (ISO 10318:2005) (multilingual version: de/en/fr)
Norm
Issue date :
2006 08 01
Geosynthetic barriers - Determination of permeability to liquids
Norm
Issue date :
2013 09 01
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
Norm
Issue date :
2013 09 01
Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and associated underground structures
Norm
Issue date :
2013 09 15
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
Norm
Issue date :
2015 06 02
Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
Norm
Issue date :
2016 04 01
Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer
Norm
Issue date :
2020 06 01
Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
Norm
Issue date :
2009 06 01
Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
Norm
Issue date :
2019 05 01
Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners
Norm
Issue date :
2013 09 01
Geosynthetic barriers - Characteristics required for use in the construction of canals