Please select and order
€120.67
excl. VAT
Add to cart
Norm
ÖNORM EN 13361
Issue date: 2007 01 01
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams (consolidated version)
This document specifies the relevant characteristics of geosynthetic barriers, including polymeric geosynthetic
barriers, clay geosynthetic barriers and bituminous geosy...
Withdrawn: 2013 09 15
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 37 Pages
Language:
German
| English
| Download GER/ENG
Currently valid:
Optionally co-design standards:
This document specifies the relevant characteristics of geosynthetic barriers, including polymeric geosynthetic
barriers, clay geosynthetic barriers and bituminous geosynthetic barriers, to be used as fluid barriers in the
construction of reservoirs and dams, and the appropriate test methods to determine these characteristics.
The intended use of these products is to control the leakage of water through the construction.
This document is not applicable to geotextiles or geotextile-related products.
This document provides for the evaluation of conformity of the product to this document.
This document defines requirements to be met by manufacturers and their authorised representatives with regard
to the presentation of product properties.
This document does not cover applications where the geosynthetic barrier is to be in contact with water that has
been treated for human consumption.
NOTE: Where potable water is or may be in direct contact with the product the designer should also refer to other relevant
standards, requirements and/or regulations.
ÖNORM EN 13361
2018 09 15
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
Norm
ÖNORM EN 13361
2013 09 15
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
Norm
ÖNORM EN 13361
2007 01 01
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams ...
Norm
↖
ÖNORM EN 13361
2004 11 01
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
Norm
Norm
Issue date :
2010 09 03
Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
Norm
Issue date :
1995 07 27
Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
Norm
Issue date :
1997 04 10
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
Norm
Issue date :
2005 04 01
Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005)
Norm
Issue date :
1995 07 01
Geotextiles and geotextile-related products - Determination of thickness at specified pressures - Part 1: Single layers
Norm
Issue date :
2006 12 01
Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006)
Norm
Issue date :
2008 10 01
Geosynthetics - Wide-width tensile test (ISO 10319:2008)
Norm
Issue date :
1999 05 01
Geotextiles and geotextile-related products - Identification on site (ISO 10320:1999)
Norm
Issue date :
2013 06 01
Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature
Norm
Issue date :
2000 01 01
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of resistance to tearing (nail shank)
Norm
Issue date :
2000 01 01
Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties
Norm
Issue date :
2000 05 01
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing
Norm
Issue date :
2000 12 01
Geotextiles and geotextile-related products - Determination of the resistance to weathering
Norm
Issue date :
2000 12 01
Geotextiles and geotextile-related products - Method for determining the microbiological resistance by a soil burial test
Norm
Issue date :
2012 03 01
Geosynthetics - General tests for evaluation following durability testing
Norm
Issue date :
2013 07 01
Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing
Norm
Issue date :
2010 01 15
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
Norm
Issue date :
2004 02 01
Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
Norm
Issue date :
2004 08 01
Geosynthetics - Screening test method for determining chemical resistance for landfill applications
Norm
Issue date :
2004 08 01
Geosynthetic barriers - Test method for determining the resistance to leaching
Norm
Issue date :
2005 04 01
Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO 13438:2004)
Norm
Issue date :
2005 04 01
Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test (ISO 12957-1:2005)
Norm
Issue date :
2005 04 01
Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2:2005)
Norm
Issue date :
2013 09 01
Geosynthetic barriers - Characteristics required for use in the construction of canals
Norm
Issue date :
2005 06 01
Geosynthetic barriers - Screening test method for determining the resistance to oxidation
Norm
Issue date :
2013 09 01
Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
Norm
Issue date :
2006 05 01
Geosynthetics - Terms and definitions (ISO 10318:2005) (multilingual version: de/en/fr)
Norm
Issue date :
2006 08 01
Geosynthetic barriers - Determination of permeability to liquids
Norm
Issue date :
2013 09 01
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
Norm
Issue date :
2013 09 01
Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and associated underground structures
Norm
Issue date :
2015 06 02
Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
Norm
Issue date :
1993 06 10
Plastics — Determination of tensile properties — Part 1: General principles
Norm
Issue date :
2018 11 05
Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
Norm
Issue date :
1997 04 10
Plastics — Determination of tensile properties — Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
Norm
Issue date :
2013 09 15
Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams