Please select and order
€134.80
excl. VAT
Add to cart
Norm

ÖNORM EN 13043

Issue date: 2013 07 15

Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas

This European Standard specifies the properties of aggregates and filler aggregates obtained by processing natural, manufactured or recycled materials and mixtures of the...
Withdrawn: 2014 02 15
Publisher:
Austrian Standards International
Format:
Digital | 52 Pages
Language:
German | English | Download GER/ENG
Currently valid:
Optionally co-design standards:
This European Standard specifies the properties of aggregates and filler aggregates obtained by processing natural, manufactured or recycled materials and mixtures of these aggregates for use in bituminous mixtures and surface treatments for roads, airfields and other trafficked areas. This standard does not cover the use of reclaimed bituminous mixtures. It also covers recycled aggregate with particle densities greater than 1,50 Mg/m³ (1 500 kg/m³) with appropriate caveats and recycled fine aggregate with appropriate caveats. A list of the source materials that have been considered and indicating those which are within the scope of this standard is given in Annex A (normative). Requirements for the evaluation of conformity of the products to this European Standard are given in EN 16236. It incorporates a general requirement that aggregates shall not release any dangerous substances in excess of the maximum permitted levels specified in a relevant European Standard for the material or permitted in the national regulations of the member state of destination. The tables in this standard include categories which are common across the four main aggregate standards: EN 12620, EN 13043, EN 13139 and EN 13242. Not all of these categories are appropriate for aggregates for use for bituminous mixtures. Categories, notes, comments etc., which are grey shaded, should not be used for aggregates for bituminous mixtures. Aggregates used in construction should comply with all the requirements of the relevant European Standards. These standards include comprehensive and specific requirements for natural aggregates, iron and steel making slag and recycled aggregates, dealing with, for example, the stability of certain basalts, the expansion of certain slags and the constitution of recycled aggregates. For materials from some other secondary sources, however, work is ongoing and the requirements are incomplete. In the meantime, such materials, when placed on the market as aggregates, should conform fully to this standard but may also be required to conform to specific relevant additional requirements at the place of use. Additional characteristics and requirements may be specified on a case by case basis depending upon experience of use of the product, and defined in specific contractual documents. Requirements for the declaration of the potential of aggregates to release regulated dangerous substances are currently under development. Until such time as these are finalised, attention should be paid to requirements at the place of use.
ÖNORM EN 13043
2014 02 15
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked ...
Norm
ÖNORM EN 13043
2013 07 15
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked ...
Norm
ÖNORM EN 13043
2004 10 01
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked ...
Norm
ÖNORM EN 13043
2003 01 01
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked ...
Norm
ÖNORM B 3681
1997 11 01
Testing of technical asphalts for road pavings and related purposes - Swell test
Vornorm
ÖNORM B 3681
1982 12 01
Testing of bituminous materials for road pavings and related purposes; swell test
Norm
Expand
Norm
ISO 565:1990
Issue date : 1990 07 12
Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
Norm
ISO 9277:2010
Issue date : 2010 08 20
Determination of the specific surface area of solids by gas adsorption — BET method
Norm
ÖNORM EN 196-6
Issue date : 2010 03 01
Methods of testing cement - Part 6: Determination of fineness
Norm
ÖNORM EN 933-8
Issue date : 2012 03 01
Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test
Norm
ÖNORM EN 933-10
Issue date : 2009 08 15
Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving)
Norm
ÖNORM EN 932-3
Issue date : 2004 04 01
Tests for general properties of aggregates - Part 3: Procedure and terminology for simplified petrographic description (EN 932-3:1996 + A1:2003)
Norm
ÖNORM EN 933-5
Issue date : 2005 04 01
Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles (consolidated version)
Norm
ÖNORM EN 1367-2
Issue date : 2009 12 01
Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test
Norm
ÖNORM EN 1097-3
Issue date : 1998 08 01
Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
Norm
ÖNORM EN 1097-4
Issue date : 2008 05 01
Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler
Norm
ÖNORM EN 1367-1
Issue date : 2007 06 01
Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing
Norm
ÖNORM EN 13179-2
Issue date : 2001 03 01
Tests for filler aggregate used in bituminous mixtures - Part 2: Bitumen number
Norm
ÖNORM EN 13179-1
Issue date : 2013 09 01
Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test
Norm
ÖNORM EN 1367-3
Issue date : 2005 07 01
Tests for thermal and weathering properties of aggregates - Part 3: Boiling test for "Sonnenbrand basalt" (consolidated version)
Norm
ÖNORM EN 459-2
Issue date : 2010 12 15
Building lime - Part 2: Test methods
Norm
ÖNORM EN 1367-5
Issue date : 2011 03 01
Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock
Norm
ÖNORM EN 196-2
Issue date : 2013 10 01
Method of testing cement - Part 2: Chemical analysis of cement
Norm
ÖNORM EN 1744-4
Issue date : 2005 10 01
Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures
Norm
ÖNORM EN 933-4
Issue date : 2008 10 01
Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index
Norm
ÖNORM EN 1097-7
Issue date : 2009 01 01
Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
Norm
ÖNORM EN 1097-5
Issue date : 2008 10 01
Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
Norm
ÖNORM EN 1367-6
Issue date : 2008 10 01
Tests for thermal and weathering properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCI)
Norm
ÖNORM EN 1097-8
Issue date : 2011 01 15
Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value (consolidated version)
Norm
ÖNORM EN 933-9
Issue date : 2013 06 01
Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test
Norm
ÖNORM EN 1744-1
Issue date : 2013 02 01
Tests for chemical properties of aggregates - Part 1: Chemical analysis
Norm
ÖNORM EN 1097-2
Issue date : 2010 06 01
Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
Norm
ÖNORM EN 1097-1
Issue date : 2011 03 01
Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
Norm
ÖNORM EN 933-1
Issue date : 2012 03 01
Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
Norm
ÖNORM EN 933-3
Issue date : 2012 06 15
Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index
Norm
ÖNORM EN 12697-11
Issue date : 2012 11 01
Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen
Norm
ÖNORM EN 1097-6
Issue date : 2013 08 15
Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
Norm
ÖNORM EN 1097-9
Issue date : 2014 02 15
Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test
Norm
ÖNORM EN 933-6
Issue date : 2014 08 15
Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
Norm
ISO 565:1990
Issue date : 1990 07 12
Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
Norm
ISO 9277:2010
Issue date : 2010 08 20
Determination of the specific surface area of solids by gas adsorption — BET method
Norm
ÖNORM EN 13043
Issue date : 2014 02 15
Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas (consolidated version)