Please select and order
€64.38
excl. VAT
Add to cart
Norm

ÖNORM EN 12953-10

Issue date: 2004 01 01

Shell boilers - Part 10: Requirements for feedwater and boiler water quality

This Part of this European Standard applies to all shell boilers as defined in EN 12953-1 which are heated by combustion of one or more fuels or by hot gases for the gen...
Valid
This Part of this European Standard applies to all shell boilers as defined in EN 12953-1 which are heated by combustion of one or more fuels or by hot gases for the generation of steam and/or hot water. This Part of this European Standard applies to those components between the feedwater inlet and the steam outlet of the steam generator. The quality of the steam produced is outside the scope of this standard. This Part of this European Standard aims to ensure that the boiler is able to be operated to minimize risk to personnel, the boiler and associated plant components located near it. NOTE 1 This part of this European Standard does not aim to achieve optimum economic operation. For certain purposes, it will be more appropriate to optimize the chemical characteristics in order to: increase the thermal efficiency; increase the availability and reliability of the plant; increase the steam purity; reduce the maintenance costs ¿ repair, chemical cleaning, etc. This Part of this European Standard sets out minimum requirements for the specific types of water to reduce the risk of corrosion, sludge precipitation or formation of deposits which may lead to any damage or other operating problems. NOTE 2 This Part of this European Standard has been prepared on the assumption that the user of this European Standard possesses a sufficient knowledge of the construction and operation of the boiler as well as an adequate appreciation of water and steam chemistry.
ÖNORM EN 12953-10
2004 01 01
Shell boilers - Part 10: Requirements for feedwater and boiler water quality
Norm
Norm
ISO 10523:2008
Issue date : 2008 11 28
Water quality — Determination of pH
Norm
ISO 5667-1:2006
Issue date : 2006 12 14
Water quality — Sampling — Part 1: Guidance on the design of sampling programmes and sampling techniques
Norm
ISO 5667-3:2003
Issue date : 2003 12 09
Water quality — Sampling — Part 3: Guidance on the preservation and handling of water samples
Norm
ISO 5814:1990
Issue date : 1990 03 29
Water quality — Determination of dissolved oxygen — Electrochemical probe method
Norm
ISO 6059:1984
Issue date : 1984 05 01
Water quality — Determination of the sum of calcium and magnesium — EDTA titrimetric method
Norm
ISO 6332:1988
Issue date : 1988 02 11
Water quality — Determination of iron — Spectrometric method using 1,10-phenanthroline
Norm
ISO 6878:2004
Issue date : 2004 06 02
Water quality — Determination of phosphorus — Ammonium molybdate spectrometric method
Norm
ISO 7888:1985
Issue date : 1985 05 16
Water quality — Determination of electrical conductivity
Norm
ISO 8245:1999
Issue date : 1999 03 04
Water quality — Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)
Norm
ISO 8288:1986
Issue date : 1986 03 13
Water quality — Determination of cobalt, nickel, copper, zinc, cadmium and lead — Flame atomic absorption spectrometric methods
Norm
ISO 9964-1:1993
Issue date : 1993 04 29
Water quality — Determination of sodium and potassium — Part 1: Determination of sodium by atomic absorption spectrometry
Norm
ISO 9964-2:1993
Issue date : 1993 04 28
Water quality — Determination of sodium and potassium — Part 2: Determination of potassium by atomic absorption spectrometry
Norm
ÖNORM EN 12953-1
Issue date : 2002 09 01
Shell boilers - Part 1: General
Norm
ÖNORM EN ISO 9963-1
Issue date : 1996 02 01
Water quality - Determination of alkalinity - Part 1: Determination of total and composite alkalinity (ISO 9963-1:1994)
Norm
ISO 5667-1:2020
Issue date : 2020 12 03
Water quality — Sampling — Part 1: Guidance on the design of sampling programmes and sampling techniques
Norm
ISO 5667-3:2018
Issue date : 2018 05 11
Water quality — Sampling — Part 3: Preservation and handling of water samples
Norm
ISO 5814:2012
Issue date : 2012 10 11
Water quality — Determination of dissolved oxygen — Electrochemical probe method
Norm
ISO 6059:1984
Issue date : 1984 05 01
Water quality — Determination of the sum of calcium and magnesium — EDTA titrimetric method
Norm
ISO 6332:1988
Issue date : 1988 02 11
Water quality — Determination of iron — Spectrometric method using 1,10-phenanthroline
Norm
ISO 6878:2004
Issue date : 2004 06 02
Water quality — Determination of phosphorus — Ammonium molybdate spectrometric method
Norm
ISO 7888:1985
Issue date : 1985 05 16
Water quality — Determination of electrical conductivity
Norm
ISO 8288:1986
Issue date : 1986 03 13
Water quality — Determination of cobalt, nickel, copper, zinc, cadmium and lead — Flame atomic absorption spectrometric methods
Norm
ISO 9964-1:1993
Issue date : 1993 04 29
Water quality — Determination of sodium and potassium — Part 1: Determination of sodium by atomic absorption spectrometry
Norm
ISO 9964-2:1993
Issue date : 1993 04 28
Water quality — Determination of sodium and potassium — Part 2: Determination of potassium by atomic absorption spectrometry
Norm
ISO 10523:2008
Issue date : 2008 11 28
Water quality — Determination of pH