Please select and order
€134.80
excl. VAT
Add to cart
Norm

ÖNORM EN 12566-3

Issue date: 2013 08 15

Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants

This European Standard specifies requirements, test methods, the marking and evaluation of conformity for packaged and/or site assembled domestic wastewater treatment pla...
Withdrawn: 2016 12 01
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 49 Pages
Language:
German | English | Download GER/ENG
Optionally co-design standards:
This European Standard specifies requirements, test methods, the marking and evaluation of conformity for packaged and/or site assembled domestic wastewater treatment plants (including guest houses and businesses) used for populations up to 50 inhabitants. Small wastewater treatment plants according to this European Standard are used for the treatment of raw domestic wastewater. It covers plants with tanks made of concrete, steel, PVC-U, Polyethylene (PE), Polypropylene (PP), Glass Reinforced Polyester (GRP-UP), Polydicyclopentadiene (PDCPD) and container made of flexible sheets (PEHD, PP, PVC, EPDM). The test methods specified in this European Standard establish the performance of the plant, needed to verify its suitability for the end use. This European Standard applies for small wastewater treatment plants for use buried in the ground where no vehicle loads are applied to the product. This European Standard applies to plants where all prefabricated components are factory or site-assembled by one manufacturer and which are tested as a whole.
ÖNORM EN 12566-3
2016 12 01
Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic...
Norm
ÖNORM EN 12566-3
2013 08 15
Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic...
Norm
ÖNORM EN 12566-3
2009 09 01
Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic...
Norm
ÖNORM EN 12566-3
2005 12 01
Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic...
Norm
Expand
Norm
ISO 5664:1984
Issue date : 1984 05 01
Water quality — Determination of ammonium — Distillation and titration method
Norm
ISO 6060:1989
Issue date : 1989 10 05
Water quality — Determination of the chemical oxygen demand
Norm
ISO 6778:1984
Issue date : 1984 05 01
Water quality — Determination of ammonium — Potentiometric method
Norm
ISO 7150-1:1984
Issue date : 1984 05 01
Water quality — Determination of ammonium — Part 1: Manual spectrometric method
Norm
ÖNORM EN 580
Issue date : 2003 10 01
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT)
Norm
ÖNORM EN 727
Issue date : 1994 11 01
Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST)
Norm
ÖNORM EN ISO 13229
Issue date : 2011 10 15
Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010)
Norm
ÖNORM EN ISO 9967
Issue date : 2008 03 01
Thermoplastics pipes - Determination of creep ratio (ISO 9967:2007)
Norm
ÖNORM EN ISO 9969
Issue date : 2008 03 01
Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2007)
Norm
ÖNORM EN 872
Issue date : 2005 04 01
Water quality - Determination of suspended solids - Method by filtration through glass fibre filters
Norm
ÖNORM EN ISO 527-2
Issue date : 2012 05 15
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
Norm
ÖNORM EN ISO 899-2
Issue date : 2003 10 01
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003)
Norm
ÖNORM EN 1085
Issue date : 2007 06 01
Wastewater treatment - Vocabulary (multilingual version: de/en/fr)
Norm
ÖNORM EN ISO 11732
Issue date : 2005 06 01
Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005)
Norm
ÖNORM EN 978
Issue date : 1998 04 01
Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta
Norm
ÖNORM EN 976-1
Issue date : 1998 04 01
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: ............(abbreviated)
Norm
ÖNORM EN ISO 11905-1
Issue date : 1998 10 01
Water quality - Determination of nitrogen - Part 1: Method using oxidative digestion with peroxodisulfate (ISO 11905-1:1997)
Norm
ÖNORM EN 1905
Issue date : 1999 10 01
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content
Norm
ÖNORM EN 12255-10
Issue date : 2001 09 01
Wastewater treatment plants - Part 10: Safety principles
Norm
ÖNORM EN 12255-11
Issue date : 2001 12 01
Wastewater treatment plants - Part 11: General data required
Norm
ÖNORM EN 12255-7
Issue date : 2002 08 01
Wastewater treatment plants - Part 7: Biological fixed-film reactors
Norm
ÖNORM EN 12255-6
Issue date : 2002 08 01
Wastewater treatment plants - Part 6: Activated sludge processes
Norm
ÖNORM EN 12255-1
Issue date : 2002 08 01
Wastewater treatment plants - Part 1: General construction principles
Norm
ÖNORM EN 12255-4
Issue date : 2002 08 01
Wastewater treatment plants - Part 4: Primary settlement
Norm
ÖNORM EN 12260
Issue date : 2003 12 01
Water quality - Determination of nitrogen - Determination of bound nitrogen (TNb), following oxidation to nitrogen oxides
Norm
ÖNORM EN ISO 6878
Issue date : 2004 09 01
Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method (ISO 6878:2004)
Norm
ÖNORM EN ISO 2505
Issue date : 2005 10 01
Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005)
Norm
ÖNORM EN ISO 1133-1
Issue date : 2012 03 15
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
Norm
ÖNORM EN ISO 1133-2
Issue date : 2012 03 15
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
Norm
ÖNORM EN 14150
Issue date : 2006 08 01
Geosynthetic barriers - Determination of permeability to liquids
Norm
ÖNORM EN 13501-1
Issue date : 2009 12 01
Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
Norm
ÖNORM EN 12311-2
Issue date : 2013 09 01
Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing
Norm
ÖNORM EN ISO 178
Issue date : 2013 09 15
Plastics - Determination of flexural properties (ISO 178:2010+Amd 1:2013) (consolidated version)
Norm
ÖNORM EN 13369
Issue date : 2013 06 01
Common rules for precast concrete products
Norm
ISO 5664:1984
Issue date : 1984 05 01
Water quality — Determination of ammonium — Distillation and titration method
Norm
ISO 6060:1989
Issue date : 1989 10 05
Water quality — Determination of the chemical oxygen demand
Norm
ISO 6778:1984
Issue date : 1984 05 01
Water quality — Determination of ammonium — Potentiometric method
Norm
ISO 7150-1:1984
Issue date : 1984 05 01
Water quality — Determination of ammonium — Part 1: Manual spectrometric method
Norm
ÖNORM EN 12566-3
Issue date : 2016 12 01
Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants