Please select and order
€120.67
excl. VAT
Add to cart
Norm
ÖNORM EN 124-6
Issue date: 2015 09 15
Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
This European Standard applies to manhole tops and gully tops made of Polypropylene (PP), Polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) by a moulding or...
Valid
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 43 Pages
Language:
German
| English
| Download GER/ENG
Optionally co-design standards:
ICS
This European Standard applies to manhole tops and gully tops made of Polypropylene (PP), Polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) by a moulding or extrusion process, with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic.
It is applicable to manhole tops and gully tops for use in
- areas which can only be used by pedestrians and pedal cyclists (class A 15), and
- pedestrian areas and comparable areas, car parks or car parking decks (class B 125).
This European Standard gives guidance for combinations of covers/grating made of PP, PE or PVC–U with frames according to EN 124-2, EN 124-3, EN 124-4 and EN 124-5.
This European Standard is not applicable in isolation but only in combination with EN 124-1.
ÖNORM EN 124-6
2015 09 15
Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops...
Norm
↖
ÖNORM B 5110
1995 01 01
Gully tops and manhole tops for vehicular and pedestrian areas on the basis of ÖNORM EN 124
Norm
ÖNORM EN 124
1995 01 01
Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, ...
Norm
ÖNORM B 5124
1958 11 08
Einlaufgitter für Straßenabläufe; Baugrundsätze, Tragfähigkeit, Prüfung
Norm
ÖNORM B 5124
1958 11 08
Einlaufgitter für Straßenabläufe; Baugrundsätze, Tragfähigkeit, Prüfung
Norm
Norm
Issue date :
2012 02 22
Plastics — Determination of tensile properties — Part 1: General principles
Norm
Issue date :
2006 07 05
Textile glass — Staple fibres or filaments — Determination of average diameter
Norm
Issue date :
1994 12 01
Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method
Norm
Issue date :
2009 10 29
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs
Norm
Issue date :
2009 10 29
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts
Norm
Issue date :
1986 12 11
Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method and basic specification
Norm
Issue date :
2000 10 26
Plastics — Reinforcement fibres — Chopped strands — Determination of bulk density
Norm
Issue date :
1994 11 01
Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993)
Norm
Issue date :
2005 06 01
Plastics - Determination of tensile-impact strength (ISO 8256:2004)
Norm
Issue date :
2011 07 01
Copper and copper alloys - Rod for free machining purposes
Norm
Issue date :
2005 07 01
Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005)
Norm
Issue date :
1999 10 01
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering
Norm
Issue date :
2001 04 01
Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:1999)
Norm
Issue date :
2001 04 01
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Partie 1: Specifications for pipes, fittings and the system
Norm
Issue date :
2011 06 01
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers
Norm
Issue date :
2013 04 01
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
Norm
Issue date :
2004 10 01
Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004)
Norm
Issue date :
2005 06 01
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005)
Norm
Issue date :
2005 06 01
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
Norm
Issue date :
2013 12 01
Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2013)
Norm
Issue date :
2015 07 15
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
Norm
Issue date :
2010 04 01
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers in traffic areas and deep underground installations (consolidated version)
Norm
Issue date :
2015 02 15
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
Norm
Issue date :
2009 10 01
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
Norm
Issue date :
2009 12 01
Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
Norm
Issue date :
2015 01 15
Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
Norm
Issue date :
2011 12 15
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
Norm
Issue date :
2012 03 15
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
Norm
Issue date :
2012 08 01
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system
Norm
Issue date :
2013 06 01
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
Norm
Issue date :
2013 06 15
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre
Norm
Issue date :
2015 09 15
Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials
Norm
Issue date :
2015 09 15
Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete
Norm
Issue date :
2015 09 15
Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron
Norm
Issue date :
2015 09 15
Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods
Norm
Issue date :
2015 09 15
Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys
Norm
Issue date :
2019 07 26
Plastics — Determination of tensile properties — Part 1: General principles
Norm
Issue date :
2006 07 05
Textile glass — Staple fibres or filaments — Determination of average diameter
Norm
Issue date :
1994 12 01
Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method
Norm
Issue date :
2020 04 02
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs with specified grades and property classes
Norm
Issue date :
2020 04 06
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts with specified grades and property classes
Norm
Issue date :
2019 02 27
Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method
Norm
Issue date :
2000 10 26
Plastics — Reinforcement fibres — Chopped strands — Determination of bulk density
