Please select and order
€120.67
excl. VAT
Add to cart
Norm
ÖNORM EN 12245
Issue date: 2002 06 01
Transportable gas cylinders - Fully wrapped composite cylinders
This European Standard specifies minimum requirements for the materials, design, construction,
prototype testing and routine manufacturing inspections of composite gas c...
Withdrawn: 2009 03 15
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 45 Pages
Language:
German
| English
Currently valid:
Optionally co-design standards:
ICS
This European Standard specifies minimum requirements for the materials, design, construction,
prototype testing and routine manufacturing inspections of composite gas cylinders with a water
capacity up to and including 450 l for compressed, liquefied and dissolved gases.
NOTE For the purposes of this standard, the word cylinder includes tubes up to 450 l water capacity
This standard is applicable to cylinders that comprise a liner of metallic material (welded or seamless)
or non-metallic material (or a mixture thereof), reinforced by a wound composite consisting of fibres of
glass, carbon or aramid (or a mixture thereof) embedded in a matrix.
This standard is also applicable to composite cylinders without liners.
This standard is not applicable to gas cylinders which are partially covered with fibres and commonly
called hoop wrapped cylinders. For hoop wrapped composite cylinders see EN 12257.
NOTE The specification does not address the design, fitting and performance of removable protective
sleeves. Where these are fitted they should be considered separately.
Draft
Issue date :
2008 08 21
Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets
Norm
Issue date :
2005 06 07
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
Norm
Issue date :
2001 06 07
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 3: Polyethylenes and polypropylenes
Draft
Issue date :
2008 09 11
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 3: Polyethylenes and polypropylenes
Norm
Issue date :
1999 05 06
Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals
Norm
Issue date :
1999 09 30
Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear
Norm
Issue date :
2000 05 25
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
Norm
Issue date :
1993 06 10
Plastics — Determination of tensile properties — Part 1: General principles
Norm
Issue date :
1993 06 10
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Norm
Issue date :
2004 05 12
Plastics — Determination of temperature of deflection under load — Part 1: General test method
Norm
Issue date :
2004 05 12
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
Norm
Issue date :
2000 09 01
Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders
Norm
Issue date :
2006 07 01
Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel (consolidated version)
Norm
Issue date :
2006 10 01
Transportable gas cylinders - Reffilable welded steel gas cylinders - Design and construction - Part 2: Stainless steel (consolidated version)
Norm
Issue date :
1999 08 01
Transportable gas cylinders - Specification for the design and construction of reffilable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 1: Cylinders made of seamless steel with an Rm value of less than 1100 MPa
Norm
Issue date :
2002 05 01
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 2: Cylinders made of seamless steel with an Rm value of 1100 MPa and above
Norm
Issue date :
2000 06 01
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of seamless stainless steel with an Rm value of less than 1100 MPa
Norm
Issue date :
2004 04 01
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litres (EN 1975:1999 + A1:2003)
Norm
Issue date :
1996 11 01
Transportable gas cylinders - Gases and gas mixtures - Part 2: Determination of flammability and oxidizing ability of gases and gas mixtures
Norm
Issue date :
1998 02 01
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:1997)
Norm
Issue date :
2009 04 15
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO/DIS 11114-1:2009)
Norm
Issue date :
1998 11 01
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:1997) (Corrigendum)
Norm
Issue date :
2001 03 01
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2000)
Norm
Issue date :
1998 02 01
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere (ISO 11114-3:1997)
Norm
Issue date :
2009 02 15
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere (ISO/DIS 11114-3:2008)
Norm
Issue date :
1998 11 01
Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere (ISO 11114-3:1997) (Corrigendum)
Norm
Issue date :
1999 09 01
Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 I and 3000 I - Design, construction and testing (ISO 11120:1999)
Norm
Issue date :
1998 02 01
Transportable gas cylinders - Fitting of valves to gas cylinders (ISO 13341:1997)
Norm
Issue date :
2008 10 15
Transportable gas cylinders - Fitting of valves to gas cylinders (ISO/DIS 13341:2008)
Norm
Issue date :
1998 11 01
Transportable gas cylinders - Fitting of valves to gas cylinders (ISO 13341:1997) (Corrigendum)
Norm
Issue date :
2006 09 01
Gas cylinders - Stamp marking (ISO 13769:2002 + Amd.1:2003)
Norm
Issue date :
2020 02 28
Plastics — Determination of temperature of deflection under load — Part 1: General test method
Norm
Issue date :
2004 05 12
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
Norm
Issue date :
2010 10 22
Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals
Norm
Issue date :
2019 07 26
Plastics — Determination of tensile properties — Part 1: General principles
Norm
Issue date :
2012 02 22
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Norm
Issue date :
1999 09 30
Paints and varnishes — Determination of viscosity using rotary viscometers — Part 1: Cone-and-plate viscometer operated at a high rate of shear
Norm
Issue date :
2000 05 25
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
Norm
Issue date :
2009 03 15
Transportable gas cylinders - Fully wrapped composite cylinders