Please select and order
€109.76
excl. VAT
Add to cart
Norm
ÖNORM EN 12158-2
Issue date: 2001 02 01
Builders hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices
1.1 This standard deals with power operated temporarily installed builders hoists intended for
use by persons who are permitted to enter sites of engineering and constru...
Withdrawn: 2011 03 15
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 42 Pages
Language:
German
| English
Currently valid:
Optionally co-design standards:
ICS
1.1 This standard deals with power operated temporarily installed builders hoists intended for
use by persons who are permitted to enter sites of engineering and construction, serving either
one upper landing or a work area extending to the end of the guides, (e.g. a roof) having a load
carrying device (lcd):
which is intended for the transportation of goods only;
where it is forbidden for persons to step upon it at any time;
which is guided;
which is designed to travel at an angle of at least 30 degrees to the vertical but may be
used at any angle between the vertical and the maximum inclination as specified by the
manufacturer;
which is sustained by steel wire rope and a positive drive system;
which is controlled by hold-to-run controls by the operator;
which does not benefit from the use of any counterweight;
which has a maximum rated load of 300 kg;
Page 4
EN 12158-2:2000
which has a maximum speed of 1,00 m/s;
and where the guides require support from separate structures.
1.2 The standard identifies hazards as listed in clause 4, which arise during the various phases in
the life of such equipment and describes methods for the elimination or reduction of these hazards
when used as intended by the manufacturer.
1.3 This European standard does not specify the additional requirements for:
operation in severe conditions (e.g. extreme climates, strong magnetic fields);
lightning protection;
operation subject to special rules (e.g. potentially explosive atmospheres);
electromagnetic compatibility (emission, immunity);
handling of loads the nature of which could lead to dangerous situations (e.g. molten
metal, acids/bases, radiating materials, fragile loads);
the use of combustion engines;
the use of remote controls;
hazards occurring during manufacture;
hazards occurring as a result of mobility;
hazards occurring as a result of being erected over a public road;
earthq (...abbreviated)
ÖNORM EN 12158-2
2011 06 01
Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices
Norm
ÖNORM EN 12158-2
2011 03 15
Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices
Norm
ÖNORM EN 12158-2
2001 02 01
Builders hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices
Norm
↖
Norm
Issue date :
2004 01 26
Steel wire ropes for general purposes — Minimum requirements
Norm
Issue date :
2010 07 27
Cranes — Wire ropes — Care and maintenance, inspection and discard
Norm
Issue date :
2008 08 01
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
Norm
Issue date :
2017 11 30
Cranes — Wire ropes — Care and maintenance, inspection and discard
Norm
Issue date :
2011 03 15
Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices