Please select and order
€160.20
excl. VAT
Add to cart
Norm

ÖNORM EN 12158-1

Issue date: 2001 01 01

Builders hoists for goods - Part 1: Hoists with accessible platforms

1.1 This standard deals with power operated temporarily installed builders hoists (referred to as hoists in this standard) intended for use by persons who are permitted ...
Withdrawn: 2011 09 01
§ Legal References
Publisher:
Austrian Standards International
Format:
Digital | 66 Pages
Language:
German | English | Download GER/ENG
1.1 This standard deals with power operated temporarily installed builders hoists (referred to as hoists in this standard) intended for use by persons who are permitted to enter sites of engineering and construction, serving landing levels, having a load carrying device: designed for the transportation of goods only; guided; travelling vertically or along a path within 15 degrees max. of the vertical; supported or sustained by drum driven wire rope, chain, rack and pinion, hydraulic jack (direct or indirect), or an expanding linkage mechanism; where masts, when erected, may or may not require support from separate structures; which permits the access of instructed persons during loading and unloading; which are driven by appointed persons; which permits, if necessary, during erection, dismantling, maintenance and inspection, the access and travel by persons who are competent and authorised. 1.2 The standard identifies hazards as listed in clause 4 which arise during the various phases in the life of such equipment and describes methods for the elimination or reduction of these hazards when used as intended by the manufacturer. 1.3 This European standard does not specify the additional requirements for: operation in severe conditions (e.g. extreme climates, strong magnetic fields); lightning protection; operation subject to special rules (e.g. potentially explosive atmospheres); electromagnetic compatibility (emission, immunity); handling of loads the nature of which could lead to dangerous situations (e.g. molten metal, acids/bases, radiating materials, fragile loads); the use of combustion engines; the use of remote controls; hazards occurring during manufacture; hazards occurring as a result of mobility; hazards occurring as a result of being erected over a public road; earthquakes; noise. 1.4 This standard is not applicable to builders hoists for persons and materials; lifts accordi (...abbreviated)
ÖNORM EN 12158-1
2022 04 01
Builders' hoists for goods - Part 1: Hoists with accessible platforms
Norm
ÖNORM EN 12158-1
2011 09 01
Builders' hoists for goods - Part 1: Hoists with accessible platforms
Norm
ÖNORM EN 12158-1
2001 01 01
Builders hoists for goods - Part 1: Hoists with accessible platforms
Norm
Norm
ÖNORM EN ISO 13857
Issue date : 2008 08 01
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
Norm
ÖNORM EN 349
Issue date : 2008 09 01
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
Norm
ÖNORM EN 1037
Issue date : 2008 11 01
Safety of machinery - Prevention of unexpected start-up
Norm
ÖNORM EN 894-1
Issue date : 2010 01 01
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators
Norm
ÖNORM EN 81-3
Issue date : 2010 02 01
Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts (consolidated version)
Norm
ISO 2408:1985
Issue date : 1985 12 19
Steel wire ropes for general purposes — Characteristics
Norm
ISO 4302:1981
Issue date : 1981 05 01
Cranes — Wind load assessment
Norm
ISO 4309:1990
Issue date : 1990 08 23
Cranes — Wire ropes — Code of practice for examination and discard
Norm
ISO 6336-1:1996
Issue date : 1996 05 09
Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors
Norm
ISO 6336-2:1996
Issue date : 1996 06 13
Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting)
Norm
ISO 6336-3:1996
Issue date : 1996 06 13
Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength
Norm
ISO 6336-5:1996
Issue date : 1996 06 13
Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials
Norm
ÖNORM EN 12158-1
Issue date : 2011 09 01
Builders' hoists for goods - Part 1: Hoists with accessible platforms