Please select and order
€84.27
excl. VAT
Add to cart
Norm

ÖNORM B 6550-1

Issue date: 2006 09 01

Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 1: Requirements for factory premixed EPS dry plaster

Die ÖNORM B 6550-1 sowie die ÖNORM B 6550-2 legen Anforderungen an gebundene EPS-Schüttungen aus werkmäßig vorgemischtem EPS-Trockenmörtel für die Wärme- und/oder Trittsc...
Withdrawn: 2008 08 01
Die ÖNORM B 6550-1 sowie die ÖNORM B 6550-2 legen Anforderungen an gebundene EPS-Schüttungen aus werkmäßig vorgemischtem EPS-Trockenmörtel für die Wärme- und/oder Trittschalldämmung fest, die an der Einbaustelle fertig gemischt und verarbeitet werden. Die vorliegende ÖNORM legt keine Stufen für eine bestimmte Eigenschaft fest, die von einem Produkt erreicht werden müssen, um seine Eignung für eine bestimmte Anwendung nachzuweisen. Werden für bestimmte Anwendungen Stufen gefordert, sind diese den gesetzlichen Bestimmungen oder anderen gültigen Regeln zu entnehmen. Diese ÖNORM gilt nicht für fabrikmäßig in vorgefertigten Formen oder als Platten hergestellte Wärmedämmstoffe aus gebundenen EPS-Schüttungen. Diese ÖNORM gilt nicht für Produkte, deren Nennwert des Wärmedurchlasswiderstandes niedriger ist als 0,25 m² . K/W oder deren Nennwert der Wärmeleitfähigkeit bei 10 °C Mitteltemperatur größer ist als 0,1 W/(m . K).
ÖNORM B 6550-1
2008 08 01
Thermal and/or sound insulating products in building construction - Bound EPS fills - Part 1: Requir...
Norm
ÖNORM B 6550-1
2006 09 01
Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 1: ...
Norm
Norm
ÖNORM B 6015-2
Issue date : 2002 12 01
Determination of thermal conductivity by the guarded hot plate apparatus - Part 2: Determination of the specific thermal conductivity and the referenceconductivity for homogenous building materials
Norm
ÖNORM B 6015-5
Issue date : 2003 09 01
Determination of thermal conductivity by the guarded hot plate apparatus - Part 5: Determination of the nominal value and of the design value of the thermal conductivity for insulation materials
Norm
ÖNORM B 6550-2
Issue date : 2006 09 01
Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 2: Processing of the factory premixed EPS dry plaster
Norm
ÖNORM EN 1097-3
Issue date : 1998 08 01
Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
Norm
ÖNORM EN 12086
Issue date : 1997 09 01
Thermal insulating products for building applications - Determination of water vapour transmission properties
Norm
ÖNORM EN 12350-6
Issue date : 2000 04 01
Testing fresh concrete - Part 6: Density
Norm
ÖNORM EN 12350-6
Issue date : 2008 09 01
Testing fresh concrete - Part 6: Density
Norm
ÖNORM EN 12431
Issue date : 2007 07 01
Thermal insulating products for building applications - Determination of thickness for floating floor insulating products (consolidated version)
Norm
ÖNORM EN 12667
Issue date : 2001 08 01
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
Norm
ÖNORM EN 12939
Issue date : 2001 08 01
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
Norm
ÖNORM EN 13055-2
Issue date : 2004 09 01
Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
Norm
ÖNORM EN 13501-1
Issue date : 2007 05 01
Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
Norm
ÖNORM EN 1602
Issue date : 1997 02 01
Thermal insulating products for building applications - Determination of the apparent density
Norm
ÖNORM EN 1605
Issue date : 2007 07 01
Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions (consolidated version)
Norm
ÖNORM EN 1606
Issue date : 2007 07 01
Thermal insulating products for building applications - Determination of compressive creep (consolidated version)
Norm
ÖNORM EN 1609
Issue date : 2007 07 01
Thermal insulating products for building applications - Determination of dimensional short term water absorption by partial immersion (consolidated version)
Norm
ÖNORM EN 29052-1
Issue date : 1993 04 01
Acoustics - Determination of dynamic stiffness - Part 1: Materials used under floating floors in dwellings
Norm
ÖNORM EN 826
Issue date : 1996 07 01
Thermal insulating products for building applications - Determination of compression behaviour
Norm
ÖNORM EN 932-1
Issue date : 1997 01 01
Tests for general properties of aggregates - Part 1: Methods for sampling
Norm
ÖNORM EN 932-2
Issue date : 1999 07 01
Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples
Norm
ÖNORM EN 933-1
Issue date : 2006 07 01
Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method (consolidated version)
Norm
ÖNORM EN ISO 10456
Issue date : 2008 04 01
Building materials and products - Hygrothermal properties - Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007)
Norm
ÖNORM EN ISO 12570
Issue date : 2000 07 01
Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature (ISO 12570:2000)
Norm
ÖNORM EN ISO 140-8
Issue date : 1998 05 01
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 8: Laboratory measurements of the reduction of transmitted impact noise by ...(abbreviated)
Norm
ÖNORM EN ISO 717-2
Issue date : 2006 12 01
Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:1996 + A1:2006) (consolidated version)
Norm
ÖNORM B 6015-2
Issue date : 2009 11 01
Determination of thermal conductivity by means of the guarded hot plate method - Part 2: Determination of the nominal value and of the design value of thermal conductivity for homogenous building materials
Norm
ÖNORM B 6015-5
Issue date : 2009 11 01
Determination of thermal conductivity by means of the guarded hot plate method - Part 5: Determination of the nominal value and of the design value of thermal conductivity for insulating products as well as for building materials which are not specified by relevant product standards
Norm
ÖNORM B 6550-2
Issue date : 2006 09 01
Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 2: Processing of the factory premixed EPS dry plaster
Norm
ÖNORM EN 826
Issue date : 2013 04 15
Thermal insulating products for building applications - Determination of compression behaviour
Norm
ÖNORM EN 932-1
Issue date : 1997 01 01
Tests for general properties of aggregates - Part 1: Methods for sampling
Norm
ÖNORM EN 932-2
Issue date : 1999 07 01
Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples
Norm
ÖNORM EN 933-1
Issue date : 2012 03 01
Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
Norm
ÖNORM EN 1097-3
Issue date : 1998 08 01
Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
Norm
ÖNORM EN 1602
Issue date : 2013 04 15
Thermal insulating products for building applications - Determination of the apparent density
Norm
ÖNORM EN 1605
Issue date : 2013 04 15
Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
Norm
ÖNORM EN 1606
Issue date : 2013 04 15
Thermal insulating products for building applications - Determination of compressive creep
Norm
ÖNORM EN 1609
Issue date : 2013 04 15
Thermal insulating products for building applications - Determination of short term water absorption by partial immersion
Norm
ÖNORM EN 12086
Issue date : 2013 04 15
Thermal insulating products for building applications - Determination of water vapour transmission properties
Norm
ÖNORM EN 12350-6
Issue date : 2019 09 15
Testing fresh concrete - Part 6: Density
Norm
ÖNORM EN 12431
Issue date : 2013 04 15
Thermal insulating products for building applications - Determination of thickness for floating floor insulating products
Norm
ÖNORM EN 12667
Issue date : 2001 08 01
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
Norm
ÖNORM EN 12939
Issue date : 2001 08 01
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
Norm
ÖNORM EN 13055-2
Issue date : 2004 09 01
Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications
Norm
ÖNORM EN 13501-1
Issue date : 2020 01 15
Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
Norm
ÖNORM EN 29052-1
Issue date : 1993 04 01
Acoustics - Determination of dynamic stiffness - Part 1: Materials used under floating floors in dwellings
Norm
ÖNORM EN ISO 140-8
Issue date : 1998 05 01
Acoustics - Measurement of sound insulation in buildings and of building elements - Part 8: Laboratory measurements of the reduction of transmitted impact noise by ...(abbreviated)
Norm
ÖNORM EN ISO 717-2
Issue date : 2021 05 01
Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2020)
Norm
ÖNORM EN ISO 10456
Issue date : 2010 02 15
Building materials and products - Hygrothermal properties - Tabulated design values and procedures for determining declared and design thermal values - Technical Corrigendum 1 (ISO 10456:2007 + Cor 1:2009) (consolidated version)
Norm
ÖNORM EN ISO 12570
Issue date : 2018 07 15
Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature (ISO 12570:2000 + Amd 1 + Amd 2:2018) (consolidated version)
Norm
ÖNORM B 6550-1
Issue date : 2008 08 01
Thermal and/or sound insulating products in building construction - Bound EPS fills - Part 1: Requirements for factory premixed EPS dry mortar