Please select and order
€401.00
excl. VAT
Add to cart
Norm

ÖNORM B 4710-2

Issue date: 2008 09 01

Concrete - Part 2: Lightweight concrete with closed structures and a minimum dry density of 800 kg/m³ - Specification, production, use and proof of conformity - Rules for the implementation of ÖNORM EN 206-1 for lightweight concrete

Die vorliegende ÖNORM gilt für gefügedichten Leichtbeton mit einer Mindesttrockenrohdichte von 800 kg/m³, der für Ortbetonbauwerke, für vorgefertigte Bauwerke sowie für ...
Withdrawn: 2020 03 01
Publisher:
Austrian Standards International
Format:
Digital | 126 Pages
Language:
German
Currently valid:
Die vorliegende ÖNORM gilt für gefügedichten Leichtbeton mit einer Mindesttrockenrohdichte von 800 kg/m³, der für Ortbetonbauwerke, für vorgefertigte Bauwerke sowie für Fertigteile für Gebäude und Ingenieurbauwerke verwendet wird. Der Leichtbeton darf als Baustellenbeton, Transportbeton oder Leichtbeton in einem Fertigteilwerk hergestellt werden. Diese ÖNORM legt Anforderungen fest an - Leichtbetonausgangsstoffe, - Eigenschaften von Frischbeton und Festbeton und deren Nachweise, - Einschränkungen für die Leichtbetonzusammensetzung, - Festlegung des Leichtbetons, - Lieferung von Leichtbeton als Frischbeton, - Verfahren der Produktionskontrolle, - Konformitätskriterien und Beurteilung der Konformität. Diese ÖNORM gilt für Leichtbeton, der so verdichtet wird, dass - abgesehen von Poren in der Gesteinskörnung bzw. den Leichtstoffkörnungen und künstlich eingeführten Luftporen - kein nennenswerter Anteil an eingeschlossener Luft verbleibt. Andere ÖNORMEN für besondere Produkte, zB Betonfertigteile, oder für Verfahren innerhalb des Anwendungsbereiches dieser ÖNORM dürfen Abweichungen von dieser Norm erfordern oder erlauben. Zusätzliche oder abweichende Anforderungen können in anderen Teilen dieser Norm oder in anderen besonderen Europäischen Normen angegeben sein, zB für - Beton für Straßen und andere Verkehrsflächen, - die Verwendung anderer Baustoffe (zB Fasern) oder in 5.1 nicht enthaltener Ausgangsstoffe, - Beton mit einem Größtkorn der Gesteinskörnung von 4 mm oder weniger (Mörtel), siehe Tabelle NAD 10, Fußnote 1, - besondere Techniken (zB Spritzbeton), - Beton für die Lagerung von flüssigen oder gasförmigen Abfällen, - Beton für Lagerbehälter für umweltgefährdende Stoffe, - Beton für massive Bauwerke (zB Dämme), - Trockenbeton. ANMERKUNG Solange diese Normen nicht zur Verfügung stehen, dürfen die am Ort der Verwendung des Betons geltenden Regeln angewendet werden. Europäische Normen sind bereits für Beton für Straßen und Verkehrsflächen (gemäß ÖNORM EN 13877 (alle Teile)) und für Spritzbeton erschienen (gemäß ÖNORM EN 14487 (alle Teile)). Die vorliegende ÖNORM gilt nicht für - Normalbeton, - Schwerbeton, - Porenbeton, - Schaumbeton, - Beton mit haufwerksporigem Gefüge (Beton ohne Feinbestandteile), - Beton mit einer Rohdichte von weniger als 800 kg/m3, - Feuerfestbeton. Die vorliegende ÖNORM enthält keine Anforderungen hinsichtlich Gesundheit und Sicherheit zum Schutz der Arbeiter während der Herstellung und Lieferung des Leichtbetons. Die vorliegende ÖNORM sieht einen Konformitätsnachweis mit Zertifizierung der werkseigenen Produktionskontrolle vor, der durch einen Konformitätsnachweis gemäß § 3 (2) Normengesetz 1971 erbracht werden kann. Diese Zertifizierung gilt für den Hersteller, der das Erreichen der Frischbetoneigenschaften und der normkonformen Festbetoneigenschaften an erhärtetem Leichtbeton aufgrund seiner Konformitätsprüfung nachweist.
ÖNORM B 4710-2
2020 03 01
Concrete - Specification, performance, production, use and conformity - Part 2: Rules for the implem...
Norm
ÖNORM B 4710-2
2008 09 01
Concrete - Part 2: Lightweight concrete with closed structures and a minimum dry density of 800 kg/m...
Norm
ÖNORM B 4200-11
1991 09 01
Lightweight concrete - Production and quality control
Norm
Norm
ÖNORM A 2050
Issue date : 2006 11 01
Procurement of works, services and supplies - Notices, tenders and award of contract - Procedural standard
Norm
ÖNORM B 2211
Issue date : 2009 06 01
Concrete, reinforced and prestressed concrete - Works contract
Norm
ÖNORM B 3100
Issue date : 2008 08 01
Assessment of the alkali silica reactivity in concrete
Norm
ÖNORM B 3131
Issue date : 2010 08 01
Aggregates for concrete - Rules for implementation of ÖNORM EN 12620
Norm
ÖNORM B 3136
Issue date : 2006 02 01
Lightweight aggregates - Lightweight aggregates for concrete, mortar and grout - Rules for the implementation of ÖNORM EN 13055-1
Norm
ÖNORM B 4710-1
Issue date : 2007 10 01
Concrete - Part 1: Specification, production, use and verification of conformity (Rules for the implementation of ÖNORM EN 206-1 for normal and heavy concrete)
Norm
ÖNORM B 5014-2
Issue date : 2012 06 15
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 2: Cementitous materials
Norm
ÖNORM EN 196-2
Issue date : 2013 10 01
Method of testing cement - Part 2: Chemical analysis of cement
Norm
ÖNORM EN 197-1
Issue date : 2011 10 15
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Norm
ÖNORM EN 197-1
Issue date : 2014 07 15
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Norm
ÖNORM EN 450-1
Issue date : 2012 09 15
Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
Norm
ÖNORM EN 450-2
Issue date : 2005 08 01
Fly ash for concrete - Part 2: Conformity evaluation
Norm
ÖNORM EN 450-2
Issue date : 2010 05 15
Fly ash for concrete - Part 2: Conformity evaluation
Norm
ÖNORM EN 480-11
Issue date : 2005 12 01
Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete
Norm
ÖNORM EN 933-1
Issue date : 2012 03 01
Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
Norm
ÖNORM EN 934-2
Issue date : 2012 07 15
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
Norm
ÖNORM EN 934-2
Issue date : 2014 11 15
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
Norm
ÖNORM EN 1008
Issue date : 2002 10 01
Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
Norm
ÖNORM EN 1097-3
Issue date : 1998 08 01
Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
Norm
ÖNORM EN 1097-6
Issue date : 2013 08 15
Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
Norm
ÖNORM EN 1992-1-1
Issue date : 2015 02 15
Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings (consolidated version)
Norm
ÖNORM EN 12350-1
Issue date : 2009 07 15
Testing fresh concrete - Part 1: Sampling
Norm
ÖNORM EN 12350-2
Issue date : 2009 07 15
Testing fresh concrete - Part 2: Slump-test
Norm
ÖNORM EN 12350-3
Issue date : 2009 07 15
Testing fresh concrete - Part 3: Vebe test
Norm
ÖNORM EN 12350-4
Issue date : 2009 07 15
Testing fresh concrete - Part 4: Degree of compactability
Norm
ÖNORM EN 12350-5
Issue date : 2009 07 15
Testing fresh concrete - Part 5: Flow table test
Norm
ÖNORM EN 12350-6
Issue date : 2009 07 15
Testing fresh concrete - Part 6: Density
Norm
ÖNORM EN 12350-7
Issue date : 2009 07 15
Testing fresh concrete - Part 7: Air content - Pressure methods
Norm
ÖNORM EN 12390-1
Issue date : 2012 11 01
Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds
Norm
ÖNORM EN 12390-2
Issue date : 2009 07 01
Testing hardened concrete - Part 2: Making and curing specimens for strength tests
Norm
ÖNORM EN 12390-3
Issue date : 2012 04 01
Testing hardened concrete - Part 3: Compressive strength of test specimens (consolidated version)
Norm
ÖNORM EN 12390-5
Issue date : 2009 05 01
Testing hardened concrete - Part 5: Flexural strength of test specimens
Norm
ÖNORM EN 12390-6
Issue date : 2010 02 15
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
Norm
ÖNORM EN 12390-7
Issue date : 2009 05 01
Testing hardened concrete - Part 7: Density of hardened concrete
Norm
ÖNORM EN 12504-1
Issue date : 2009 05 01
Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
Norm
ÖNORM EN 12504-2
Issue date : 2013 01 01
Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number
Norm
ÖNORM EN 12620
Issue date : 2014 02 15
Aggregates for concrete
Norm
ÖNORM EN 12878
Issue date : 2014 05 15
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
Norm
ÖNORM EN 13055-1
Issue date : 2004 11 01
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout (consolidated version)
Norm
ÖNORM EN 13263-1
Issue date : 2009 06 15
Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
Norm
ÖNORM EN 13501-1
Issue date : 2009 12 01
Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
Norm
ÖNORM EN 13577
Issue date : 2007 09 01
Chemical attack on concrete - Determination of aggressive carbon dioxide content in water
Norm
ÖNORM EN 13791
Issue date : 2007 08 01
Assessment of in-situ compressive strength in structures and precast concrete components
Norm
ÖNORM EN 13877-1
Issue date : 2013 05 15
Concrete pavements - Part 1: Materials
Norm
ÖNORM EN 13877-2
Issue date : 2013 05 15
Concrete pavements - Part 2: Functional requirements for concrete pavements
Norm
ÖNORM EN 13877-3
Issue date : 2005 02 01
Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements
Norm
ÖNORM EN 14487-1
Issue date : 2006 05 01
Sprayed concrete - Part 1: Definitions, specifications and conformity
Norm
ÖNORM EN 14487-2
Issue date : 2007 01 01
Sprayed concrete - Part 2: Execution
Norm
ÖNORM EN 15167-1
Issue date : 2007 01 01
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
Norm
ÖNORM EN 15167-2
Issue date : 2007 01 01
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation
Norm
ÖNORM ISO 7150-1
Issue date : 1987 12 01
Water quality; determination of ammonium; manual spectrometric method
Norm
ISO 4316:1977
Issue date : 1977 08 01
Surface active agents — Determination of pH of aqueous solutions — Potentiometric method
Norm
ISO 7980:1986
Issue date : 1986 05 01
Water quality — Determination of calcium and magnesium — Atomic absorption spectrometric method
Technische Regel
ONR 23301
Issue date : 2008 10 01
Instructions for identity testing (ID-testing) according to ÖNORM B 4710-1:2007
Norm
ÖNORM A 2050
Issue date : 2006 11 01
Procurement of works, services and supplies - Notices, tenders and award of contract - Procedural standard
Norm
ÖNORM B 2211
Issue date : 2009 06 01
Concrete, reinforced and prestressed concrete - Works contract
Norm
ÖNORM B 3100
Issue date : 2008 08 01
Assessment of the alkali silica reactivity in concrete
Norm
ÖNORM B 3131
Issue date : 2016 08 01
Aggregates for concrete - Rules for implementation of ÖNORM EN 12620
Norm
ÖNORM B 3136
Issue date : 2006 02 01
Lightweight aggregates - Lightweight aggregates for concrete, mortar and grout - Rules for the implementation of ÖNORM EN 13055-1
Norm
ÖNORM B 3303
Issue date : 2002 09 01
Testing of concrete
Norm
ÖNORM B 3309
Issue date : 2004 02 01
Processed hydraulic additions for concrete production, marking of conformity
Norm
ÖNORM B 4700
Issue date : 2001 06 01
Reinforced concrete structures - EUROCODE-orientated analysis, design and detailing
Norm
ÖNORM B 4710-1
Issue date : 2018 01 01
Concrete - Specification, performance, production, use and conformity - Part 1: Rules for the implementation of ÖNORM EN 206 for normal and heavy concrete
Norm
ÖNORM B 5014-2
Issue date : 2017 01 01
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 2: Cementitous materials
Norm
ÖNORM B 6015-6
Issue date : 2003 09 01
Determination of thermal conductivity by the guarded hot plate apparatus - Part 6: Determination of the nominal value and of design value of the thermal conductivity for building materials which are not regulated by relevant product standards
Norm
ÖNORM EN 196-2
Issue date : 2013 10 01
Method of testing cement - Part 2: Chemical analysis of cement
Norm
ÖNORM EN 197-1
Issue date : 2011 10 15
Cement - Part 1: Composition, specifications and conformity criteria for common cements
Norm
ÖNORM EN 206-1
Issue date : 2005 11 01
Concrete - Part 1: Specification performance, production and conformity (consolidated version)
Norm
ÖNORM EN 450-1
Issue date : 2012 09 15
Fly ash for concrete - Part 1: Definition, specifications and conformity criteria
Norm
ÖNORM EN 450-2
Issue date : 2005 08 01
Fly ash for concrete - Part 2: Conformity evaluation
Norm
ÖNORM EN 480-11
Issue date : 2005 12 01
Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete
Norm
ÖNORM EN 933-1
Issue date : 2012 03 01
Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
Norm
ÖNORM EN 934-2
Issue date : 2012 07 15
Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling
Norm
ÖNORM EN 1008
Issue date : 2002 10 01
Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete
Norm
ÖNORM EN 1097-3
Issue date : 1998 08 01
Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
Norm
ÖNORM EN 1097-6
Issue date : 2022 05 01
Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
Norm
ÖNORM EN 1992-1-1
Issue date : 2015 02 15
Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings (consolidated version)
Norm
ÖNORM EN 12350-1
Issue date : 2019 11 15
Testing fresh concrete - Part 1: Sampling and common apparatus
Norm
ÖNORM EN 12350-2
Issue date : 2019 11 15
Testing fresh concrete - Part 2: Slump test
Norm
ÖNORM EN 12350-3
Issue date : 2019 11 15
Testing fresh concrete - Part 3: Vebe test
Norm
ÖNORM EN 12350-4
Issue date : 2019 11 15
Testing fresh concrete - Part 4: Degree of compactability
Norm
ÖNORM EN 12350-5
Issue date : 2019 08 15
Testing fresh concrete - Part 5: Flow table test
Norm
ÖNORM EN 12350-6
Issue date : 2019 09 15
Testing fresh concrete - Part 6: Density
Norm
ÖNORM EN 12350-7
Issue date : 2023 02 15
Testing fresh concrete - Part 7: Air content - Pressure methods (consolidated version)
Norm
ÖNORM EN 12390-1
Issue date : 2021 11 01
Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds
Norm
ÖNORM EN 12390-2
Issue date : 2019 11 15
Testing hardened concrete - Part 2: Making and curing specimens for strength tests
Norm
ÖNORM EN 12390-3
Issue date : 2019 11 15
Testing hardened concrete - Part 3: Compressive strength of test specimens
Norm
ÖNORM EN 12390-5
Issue date : 2019 10 15
Testing hardened concrete - Part 5: Flexural strength of test specimens
Norm
ÖNORM EN 12390-6
Issue date : 2010 02 15
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
Norm
ÖNORM EN 12390-7
Issue date : 2021 01 15
Testing hardened concrete - Part 7: Density of hardened concrete (consolidated version)
Norm
ÖNORM EN 12504-1
Issue date : 2021 03 01
Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression (consolidated version)
Norm
ÖNORM EN 12504-2
Issue date : 2021 10 01
Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number
Norm
ÖNORM EN 12620
Issue date : 2014 02 15
Aggregates for concrete
Norm
ÖNORM EN 12878
Issue date : 2014 05 15
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
Norm
ÖNORM EN 13055-1
Issue date : 2004 11 01
Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout (consolidated version)
Norm
ÖNORM EN 13263-1
Issue date : 2009 06 15
Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
Norm
ÖNORM EN 13501-1
Issue date : 2020 01 15
Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
Norm
ÖNORM EN 13577
Issue date : 2007 09 01
Chemical attack on concrete - Determination of aggressive carbon dioxide content in water
Norm
ÖNORM EN 13791
Issue date : 2020 02 15
Assessment of in-situ compressive strength in structures and precast concrete components
Norm
ÖNORM EN 13877-1
Issue date : 2023 12 15
Concrete pavements - Part 1: Materials
Norm
ÖNORM EN 13877-2
Issue date : 2023 12 15
Concrete pavements - Part 2: Functional requirements for concrete pavements
Norm
ÖNORM EN 13877-3
Issue date : 2005 02 01
Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements
Norm
ÖNORM EN 14487-1
Issue date : 2023 08 01
Sprayed concrete - Part 1: Definitions, specifications and conformity
Norm
ÖNORM EN 14487-2
Issue date : 2007 01 01
Sprayed concrete - Part 2: Execution
Norm
ÖNORM EN 15167-1
Issue date : 2007 01 01
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria
Norm
ÖNORM EN 15167-2
Issue date : 2007 01 01
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation
Norm
ÖNORM ISO 7150-1
Issue date : 1987 12 01
Water quality; determination of ammonium; manual spectrometric method
Norm
ISO 2859-1:1999
Issue date : 1999 11 18
Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
Norm
ISO 3951:1989
Issue date : 1989 09 14
Sampling procedures and charts for inspection by variables for percent nonconforming
Norm
ISO 4316:1977
Issue date : 1977 08 01
Surface active agents — Determination of pH of aqueous solutions — Potentiometric method
Norm
ISO 7150-2:1986
Issue date : 1986 12 18
Water quality — Determination of ammonium — Part 2: Automated spectrometric method
Norm
ISO 7980:1986
Issue date : 1986 05 01
Water quality — Determination of calcium and magnesium — Atomic absorption spectrometric method
Norm
DIN 4030-2
Issue date : 2008 06
Assessment of water, soil and gases for their aggressiveness to concrete - Part 2: Sampling and analysis of water and soil samples
Technische Regel
ONR 23301
Issue date : 2008 10 01
Instructions for identity testing (ID-testing) according to ÖNORM B 4710-1:2007
Norm
ÖNORM B 4710-2
Issue date : 2020 03 01
Concrete - Specification, performance, production, use and conformity - Part 2: Rules for the implementation of ÖNORM EN 206 for lightweight concrete with closed structures and a dry density of 800 kg/m³ up to 2 000 kg/m³