Please select and order
€79.20
excl. VAT
Add to cart
Norm

OVE EN IEC 60695-2-13

Issue date: 2022 12 01

Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials (english version)

This part of IEC 60695 specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for i...
Valid
This part of IEC 60695 specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for ignitability testing to determine the glow-wire ignition temperature (GWIT). The GWIT is the temperature which is 25 K (or 30 K) higher than the maximum test temperature, determined during this standardized procedure, at which the tested material does not ignite, or sustained flaming combustion does not occur for a time longer than 5 s for any single flame event and the specimen is not totally consumed. This test is a materials test carried out on a series of standard test specimens. The data obtained, along with data from the glow-wire flammability index (GWFI) test method for materials, IEC 60695-2-12, can then be used in a preselection process in accordance with IEC 60695-1-30 [4] to judge the ability of materials to meet the requirements of IEC 60695-2-11.
OVE EN IEC 60695-2-13
2022 12 01
Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperatur...
Norm
ÖVE/ÖNORM EN 60695-2-13
2015 02 01
Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperatur...
Norm
ÖVE/ÖNORM EN 60695-2-13
2015 02 01
Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperatur...
Norm
ÖVE/ÖNORM EN 60695-2-13
2011 11 01
Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperatur...
Norm
ÖVE/ÖNORM EN 60695-2-13
2011 11 01
Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperatur...
Norm
ÖVE/ÖNORM EN 60695-2-13
2002 01 01
Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignitability test m...
Norm
ÖVE/ÖNORM EN 60695-2-1/3
1999 05 01
Fire hazard testing - Part 2: Test methods - Section 1/sheet 3: Glow-wire ingnitability test on mate...
Norm
Expand
Norm
ISO 291:2008
Issue date : 2008 04 22
Plastics — Standard atmospheres for conditioning and testing
Norm
ISO 293:2004
Issue date : 2004 05 11
Plastics — Compression moulding of test specimens of thermoplastic materials
Norm
ISO 295:2004
Issue date : 2004 01 14
Plastics — Compression moulding of test specimens of thermosetting materials
Norm
ISO 13943:2017
Issue date : 2017 08 03
Fire safety — Vocabulary