Please select and order
€160.20
excl. VAT
Add to cart
Norm

ÖNORM EN ISO 8434-1

Issue date: 2009 03 01

Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors (ISO 8434-1:2007)

This part of ISO 8434 specifies the general and dimensional requirements for 24° cone connectors using cutting ring and O-ring seal cone (referred to as DKO) suitable fo...
Withdrawn: 2018 12 01
Publisher:
Austrian Standards International
Format:
Digital | 51 Pages
Language:
German | English | Download GER/ENG
This part of ISO 8434 specifies the general and dimensional requirements for 24° cone connectors using cutting ring and O-ring seal cone (referred to as DKO) suitable for use with ferrous and non-ferrous tubes with outside diameters from 4 mm to 42 mm inclusive. These connectors are for use in fluid power and general applications within the limits of pressure and temperature specified in this part of ISO 8434. They are intended for the connection of plain end tubes and hose fittings to ports in accordance with ISO 6149-1, ISO 1179-1 and ISO 9974-1. (See ISO 12151-2 for related hose fitting specification.) These connectors provide full-flow connections in hydraulic systems operating to the working pressures shown in Table 1. Because many factors influence the pressure at which a system performs satisfactorily, these values are not to be understood as guaranteed minimums. For every application, sufficient testing will need to be conducted and reviewed by both the user and manufacturer to ensure that required performance levels are met.
ÖNORM EN ISO 8434-1
2018 12 01
Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors (ISO 8434-1:...
Norm
ÖNORM EN ISO 8434-1
2009 03 01
Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors (ISO 8434-1:...
Norm
ÖNORM EN ISO 8434-1
1997 12 01
Metallic tube connections for fluid power and general use - Part 1: 24° compression fittings (ISO 84...
Norm
Norm
ISO 1127:1992
Issue date : 1992 12 17
Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length
Norm
ISO 1179-1:2007
Issue date : 2007 08 13
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
Norm
ISO 1179-2:2007
Issue date : 2007 08 13
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
Norm
ISO 1179-4:2007
Issue date : 2007 08 13
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
Norm
ISO 12151-2:2003
Issue date : 2003 05 20
Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
Norm
ISO 261:1998
Issue date : 1998 12 20
ISO general purpose metric screw threads — General plan
Norm
ISO 3304:1985
Issue date : 1985 11 14
Plain end seamless precision steel tubes — Technical conditions for delivery
Norm
ISO 3305:1985
Issue date : 1985 11 07
Plain end welded precision steel tubes — Technical conditions for delivery
Norm
ISO 4759-1:2000
Issue date : 2000 11 09
Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
Norm
ISO 48:2007
Issue date : 2007 06 11
Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
Norm
ISO 6149-1:2006
Issue date : 2006 02 23
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1: Ports with truncated housing for O-ring seal
Norm
ISO 6149-2:2006
Issue date : 2006 02 16
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
Norm
ISO 6149-3:2006
Issue date : 2006 02 16
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
Norm
ISO 9227:2006
Issue date : 2006 07 06
Corrosion tests in artificial atmospheres — Salt spray tests
Norm
ISO 9974-1:1996
Issue date : 1996 04 18
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
Norm
ISO 9974-2:1996
Issue date : 1996 04 18
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E)
Norm
ISO 9974-3:1996
Issue date : 1996 04 18
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B)
Norm
ISO 48:2010
Issue date : 2010 09 03
Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
Norm
ISO 228-1:2000
Issue date : 2000 09 21
Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ISO 261:1998
Issue date : 1998 12 20
ISO general purpose metric screw threads — General plan
Norm
ISO 965-1:1998
Issue date : 1998 12 20
ISO general-purpose metric screw threads — Tolerances — Part 1: Principles and basic data
Norm
ISO 1127:1992
Issue date : 1992 12 17
Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length
Norm
ISO 1179-1:2013
Issue date : 2013 10 22
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
Norm
ISO 1179-2:2013
Issue date : 2013 10 22
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
Norm
ISO 1179-4:2007
Issue date : 2007 08 13
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
Norm
ISO 3304:1985
Issue date : 1985 11 14
Plain end seamless precision steel tubes — Technical conditions for delivery
Norm
ISO 3305:1985
Issue date : 1985 11 07
Plain end welded precision steel tubes — Technical conditions for delivery
Norm
ISO 3601-3:2005
Issue date : 2005 11 10
Fluid power systems — O-rings — Part 3: Quality acceptance criteria (Corrected version 2006-04)
Norm
ISO 4759-1:2000
Issue date : 2000 11 09
Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
Norm
ISO 5598:1985
Issue date : 1985 03 28
Fluid power systems and components — Vocabulary
Norm
ISO 6149-1:2019
Issue date : 2019 04 16
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1: Ports with truncated housing for O-ring seal
Norm
ISO 6149-2:2006
Issue date : 2006 02 16
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
Norm
ISO 6149-3:2006
Issue date : 2006 02 16
Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
Norm
ISO 9227:2017
Issue date : 2017 03 17
Corrosion tests in artificial atmospheres — Salt spray tests
Norm
ISO 9974-1:1996
Issue date : 1996 04 18
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
Norm
ISO 9974-2:1996
Issue date : 1996 04 18
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E)
Norm
ISO 9974-3:1996
Issue date : 1996 04 18
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B)
Norm
ISO 12151-2:2003
Issue date : 2003 05 20
Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
Norm
ISO 19879:2005
Issue date : 2005 08 22
Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections
Norm
ÖNORM EN ISO 8434-1
Issue date : 2018 12 01
Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors (ISO 8434-1:2018)
Norm
ISO 8434-1:2007
Issue date : 2007 08 23
Metallic tube connections for fluid power and general use — Part 1: 24 degree cone connectors