Please select and order
€143.05
excl. VAT
Add to cart
Norm

ÖNORM EN ISO 21003-2

Issue date: 2022 05 15

Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes

The present Standard contains information on the national specifications of the options contained in ÖNORM EN ISO 21003-2, the provisions on self-monitoring and informati...
Valid
The present Standard contains information on the national specifications of the options contained in ÖNORM EN ISO 21003-2, the provisions on self-monitoring and information on the recommended conformity criteria. This part of ISO 21003 specifies the characteristics of pipes for multilayer piping systems intended to be used for hot and cold water installations inside buildings for the conveyance of water — whether or not the water is intended for human consumption (domestic systems) or heating systems — under specified design pressures and temperatures appropriate to the class of application (see Table 1 of ISO 21003-1:2008). It also specifies the test parameters for the test methods referred to in this part of ISO 21003. ISO 21003 is a reference product standard. It is applicable to multilayer pipes, fittings, their joints, and also to joints with components made of other plastics and non-plastics materials intended to be used for hot and cold water installations. This part of ISO 21003 is intended for use only in conjunction with all the other parts of ISO 21003. ISO 21003 covers a range of service conditions (application classes) and design pressures. It is not applicable for values of design temperature, TD, maximum design temperature, Tmax, and malfunction temperature, Tmal, in excess of those in Table 1 of ISO 21003-1:2008. The polymeric materials used for the stress-designed layers are the following: polybutylene (PB), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) and chlorinated poly(vinyl chloride) (PVC-C). The PE-X used shall be fully crosslinked and shall comply with the requirements of the relevant reference product standard (ISO 15875).
ÖNORM EN ISO 21003-2
2022 05 15
Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes
Norm
ÖNORM EN ISO 21003-2
2011 10 01
Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO...
Norm
ÖNORM EN ISO 21003-2
2008 12 01
Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO...
Norm
ÖNORM B 5159
2007 03 01
Plastics piping systems of polyethylene with raised temperature resistance (PE-RT) for hot and cold ...
Norm
ÖNORM B 5159
2004 06 01
Plastics piping systems of polyethylene with raised temperature resistance (PE-RT) for hot and cold ...
Norm
Expand
Norm
ISO 7686:2005
Issue date : 2005 06 30
Plastics pipes and fittings — Determination of opacity
Norm
ISO 161-1:2018
Issue date : 2018 01 08
Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures — Part 1: Metric series
Norm
ISO 527-1:1993
Issue date : 1993 06 10
Plastics — Determination of tensile properties — Part 1: General principles
Norm
ISO 527-2:1993
Issue date : 1993 06 10
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Norm
ISO 2578:1993
Issue date : 1993 07 29
Plastics — Determination of time-temperature limits after prolonged exposure to heat
Norm
ISO 3126:2005
Issue date : 2005 03 16
Plastics piping systems — Plastics components — Determination of dimensions
Norm
ISO 6259-1:1997
Issue date : 1997 12 18
Thermoplastics pipes — Determination of tensile properties — Part 1: General test method
Norm
ISO 9080:2012
Issue date : 2012 10 11
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
Norm
ISO 10508:2006
Issue date : 2006 03 17
Plastics piping systems for hot and cold water installations — Guidance for classification and design
Norm
ISO 13760:1998
Issue date : 1998 05 14
Plastics pipes for the conveyance of fluids under pressure — Miner's rule — Calculation method for cumulative damage
Norm
ISO 15874-2:2013
Issue date : 2013 02 13
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 2: Pipes
Norm
ISO 15875-2:2003
Issue date : 2003 12 08
Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes
Norm
ISO 15876-2:2017
Issue date : 2017 01 10
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes
Norm
ISO 15877-2:2009
Issue date : 2009 03 05
Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 2: Pipes
Norm
ISO 17454:2006
Issue date : 2006 02 06
Plastics piping systems — Multilayer pipes — Test method for the adhesion of the different layers using a pulling rig
Norm
ISO 17455:2005
Issue date : 2005 10 11
Plastics piping systems — Multilayer pipes — Determination of the oxygen permeability of the barrier pipe
Norm
ISO 17456:2006
Issue date : 2006 10 03
Plastics piping systems — Multilayer pipes — Determination of long-term strength
Norm
ISO 21003-1:2008
Issue date : 2008 06 30
Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General
Norm
ISO 21003-5:2008
Issue date : 2008 06 30
Multilayer piping systems for hot and cold water installations inside buildings — Part 5: Fitness for purpose of the system
Norm
ISO 22391-2:2009
Issue date : 2009 11 24
Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes
Norm
ÖNORM B 5014-1
Issue date : 2016 08 15
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 1: Organic materials
Norm
ÖNORM EN ISO 15874-2
Issue date : 2023 02 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013 + Amd.1:2018 + Amd.2:2022) (consolidated version)
Norm
ÖNORM EN ISO 15875-2
Issue date : 2021 07 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2003 + Amd 1:2007 + Amd 2:2020) (consolidated version)
Norm
ÖNORM EN ISO 15876-2
Issue date : 2021 11 01
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017 + Amd.1:2020) (consolidated version)
Norm
ÖNORM EN ISO 15877-2
Issue date : 2021 07 01
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO 15877-2:2009 + Amd.1:2010 + Amd.2:2020) (consolidated version)
Norm
ÖNORM EN ISO 21003-1
Issue date : 2022 05 15
Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General
Norm
ÖNORM EN ISO 22391-2
Issue date : 2021 07 01
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes (ISO 22391-2:2009 + Amd.1:2020) (consolidated version)
Norm
ÖNORM ISO 17456
Issue date : 2022 05 15
Plastics piping systems - Multilayer pipes - Determination of long-term strength (ISO 17456:2006)
Technische Regel
ONR CEN ISO/TS 21003-7
Issue date : 2019 08 15
Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity (ISO/TS 21003-7:2019)